Advertisement

Study on the Non-linear Parametric Model of Hydraulic Dampers Before Relieving for Railway Vehicles

  • Hongxing GaoEmail author
  • Maoru Chi
  • Xuesong Jin
  • Shulin Liang
  • Changxin Chi
  • Xiaozhi Zhou
Conference paper
  • 12 Downloads
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The objective of this work is to establish an accurate non-linear parametric model which relates the physical parameters with the damping characteristics of the hydraulic damper before relieving. A new non-linear parametric model including the sub-models of the orifice, hydraulic fluid, pressure chambers, reservoir chamber, etc. is established based on the theory of the fluid mechanics. Subsequently, a new force element of the hydraulic damper based on the new non-linear model is developed with Fortran language in the secondary development environment of the multi-body dynamics software SIMPACK. Used the force element, the force-displacement and force-velocity characteristics of the modified yaw damper with the base diameter of 0.4 and 0.6 mm are calculated under different amplitudes and frequencies of the sinusoidal excitation. Comparing with the experimental results obtained under the same condition, it shows that the new model can accurately model the nonlinear static and dynamic characteristics. Furthermore, the leakages for the high frequency, the air release and cavitation for the modelling of the fluid shortage, the non-constant flow coefficient of the orifice and the dynamic states of the fluid should be included in the modelling of the hydraulic damper before relieving. The non-linear parametric model proposed in this paper is more applicable to the railway vehicle system dynamics simulation and individual system description of the hydraulic damper.

Keywords

Non-linear Parametric model Hydraulic damper Force element Before relieving Orifice 

Notes

Funding

This research was funded by the Independent Research Project of State Key Laboratory of Traction Power (2018TPL_T04) and the National Key R&D Program of China (2016YFB120404, 2018YFB1201701).

References

  1. 1.
    Alonso, A., Giménez, J.G., Gomez, E.: Yaw damper modelling and its influence on railway dynamic stability. Veh. Syst. Dyn. 49(9), 1367–1387 (2011)CrossRefGoogle Scholar
  2. 2.
    Conde, Mellado A., Gomez, E., Vinolas, J.: Advances on railway yaw damper characterisation exposed to small displacements. Int. J. Heavy Veh. Syst. 13(4), 263–280 (2006)CrossRefGoogle Scholar
  3. 3.
    Surace, C., Worden, K., Tomlinson, G.R.: On the non-linear characteristics of automotive shock absorbers. Proc. Inst. Mech. Eng. Part D: J. Automot. Eng. 206(1), 3–16 (1992)CrossRefGoogle Scholar
  4. 4.
    Lang, H.H.: A study of the characteristics of automotive hydraulic dampers at high stroking frequencies. Ph.D. thesis, University of Michigan (1977)Google Scholar
  5. 5.
    Mollica, R.: Nonlinear dynamic model and simulation of a high pressure monotube shock absorber using the bond graph method. Master thesis, University of Michigan (1997)Google Scholar
  6. 6.
    Zhou, X.Z.: Research on mechanical model and dynamic behaviour of yaw damper for railway vehicles. Master thesis, Southwest Jiaotong University (2018)Google Scholar
  7. 7.
    John, C.: The Shock Absorber Handbook, 2nd edn. Wiley, Hoboken (2007)Google Scholar
  8. 8.
    Miller, D.S.: Internal Flow Systems, 2nd edn. BHR Group Limited, UK (1996)Google Scholar
  9. 9.
    Lichtarowicz, A., Duggins, R.K., Markland, E.: Discharge coefficients for incompressible non-cavitating flow through long orifices. J. Mech. Eng. Sci. 7(2), 210–219 (1965)CrossRefGoogle Scholar
  10. 10.
    Ramamurthi, K., Nandakumar, K.: Characteristics of flow through small sharp-edged cylindrical orifices. Flow Meas. Instrum. 10(3), 133–143 (1999)CrossRefGoogle Scholar
  11. 11.
    Gholizadeh, H., Burton, R., Schoenau, G.: Fluid bulk modulus: comparison of low pressure models. Int. J. Fluid Power 13(1), 7–16 (2012)CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  1. 1.State Key Laboratory of Traction PowerSouthwest Jiaotong UniversityChengduChina
  2. 2.Technical Research and Development CenterCRRC Qishuyan Institute Co., Ltd.ChangzhouChina

Personalised recommendations