Advertisement

Scenario Substructure Method (SSM) for Simulation of Long Trains

  • Sönke LückEmail author
  • Rolf NaumannEmail author
Conference paper
  • 8 Downloads
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The simulation of long trains is a great challenge, especially if all vehicle and infrastructural properties are to be considered in detail. As part of a derailment investigation, a method was developed which uses the principle of superposition of mechanics to separate the longitudinal dynamics from vertical and lateral dynamics in train simulations, the so-called Scenario Substructure Method (SSM). In the first phase, the longitudinal dynamics of the entire train is calculated using simple models, while in the second phase the superposition of the vertical and lateral dynamics is carried out with complex models. Thus, the simulation of the accident (until the derailment occurs) can be split into two phases. The presented Scenario Substructure Method describes a procedure in which the computational effort can be substantially minimized and variant calculations with a few detailed models are possible. The starting point for the development of the Scenario Substructure Method is the task of simulating the derailment of a long freight train consisting of 48 single wagons in a switch due to an initiated emergency braking. This paper uses the example of the freight train accident to apply the Scenario Substructure Method. The different possibilities of the superposition are compared and evaluated. Furthermore, an estimation of the effort reduction for the simulation calculations is carried out and compared to a detailed modelling.

Keywords

Multibody simulation Railway accident Complex system simulation Vehicle dynamics Braking 

References

  1. 1.
    Naumann, R., Müller, S., Wolther, F.: Systematic simulation study of the derailment risk of freight wagons by different periodical rail irregularities based on two accidents. In: Proceedings of 24th International Symposium on Dynamics of Vehicles on Roads and Tracks IAVSD. LNCS, Graz, Austria, 17–21 August 2015, vol. 9999, pp. 1–13. Springer, Heidelberg (2016)Google Scholar
  2. 2.
    Untersuchungsbericht des Eisenbahn-Bundesamts, Eisenbahn-Unfalluntersuchungsstelle, Zugentgleisung Kaub-Lorch am 09 June 2013, Aktenzeichen: 60uu2013-06/047-3323 vom 31 January 2017, Version 1.0Google Scholar
  3. 3.
    UIC-Merkblatt Nr. 540 Bremsen – Druckluftbremsen für Güter- und Personenzüge (2006)Google Scholar
  4. 4.
    Bing, D.: Entgleisungsdetektion im Schienengüterverkehr – Analyse der Einflüsse auf die Zuglängsdynamik. Dissertation, Technische Universität Berlin, Berlin (2014)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  1. 1.ISyM – Institute of System Dynamics and Mechatronics, Working Group Railway TechnologyUniversity of Applied Sciences BielefeldBielefeldGermany

Personalised recommendations