Towards the Limits of Vibration Attenuation in Drivetrain System by Torsional Dynamics Absorber
- 122 Downloads
Automotive industry drives development towards down-sized and down-speeded engines and higher cylinder pressure. This leads to increased torsional vibrations and therefore puts higher demands on the drivetrain vibration capabilities. The paper presents the results on the study of the limits of torsional dynamics absorbers for vibration attenuation in drivetrain systems obtained by using global sensitivity analysis and multiobjective optimization. The global sensitivity analysis comes with a mapping between the total sensitivity indices of the vibration attenuation measures of a drivetrain system and mass-inertia, stiffness and damping parameters of a torsional dynamics absorber. The multiobjective optimization is resulted in Pareto fronts showing the trade-off between the measures of vibration attenuation and energy losses making possible to identify the limits of the quality of performance of a torsional vibration absorber for a drivetrain system operating on a set of engine input loads. Detailed numerical results are presented on study of application of a dual mass flywheel for heavy-duty truck drivetrain systems in operating engine speed range up to 2000 rpm. The third engine order vibration harmonic is in focus of analysis as one of the most significant contribution to the oscillatory response in drivetrains of heavy-duty trucks.
KeywordsVibration Drivetrain system Torsional dynamics absorber Dual mass flywheel Global sensitivity analysis Pareto optimization
The research was partially funded by the Swedish Energy Agency, project 42100-1. Lina Wramner and Anders Hedman (Volvo Group Trucks Technology) and Håkan Johansson (CHALMERS) are acknowledged for useful discussion the topic of torsional vibration attenuation in heavy-duty truck powertrains.
- 2.Faust, H.: Powertrain systems of the future – engine, transmission and damper systems for downspeeding, downsizing and cylinder deactivation. In: Schaeffler Symposium, Baden-Baden, pp. 24–41 (2014)Google Scholar
- 3.Wramner, L., Berbyuk, V., Johansson, H.: Vibration dynamics in non-linear dual mass flywheels for heavy-duty trucks. In: The 28th Edition of the Biennial ISMA Conference on Noise and Vibration Engineering, Leuven, Belgium, pp. 1863–1876 (2018)Google Scholar
- 4.Wramner, L.: Dual mass flywheels in truck powertrains: modelling, simulations and validation. Thesis for Licentiate of Engineering, Department of Mechanics and Maritime Sciences, Chalmers University of Technology, Göteborg, p. 32 (2018)Google Scholar
- 5.Wramner, L.: Torsional vibrations in heavy-duty truck powertrains with dual mass flywheels. Int. J. Heavy Veh. Syst. (2019, submitted)Google Scholar
- 6.Mousavi Bideleh, S.M., Berbyuk, V.: A computer code for sensitivity analysis and multiobjective optimization: SAMO tutorial. Department of Mechanics and Maritime Sciences, Chalmers University of Technology, Gothenburg, Sweden, p. 45 (2017)Google Scholar