Advertisement

Investigation of Martensite α’ Phase Transformation During Heat Treatment of High-Speed Selective Laser Melted Ti6Al4V Components

  • P. M. LekoadiEmail author
  • N. Maledi
  • M. Tlotleng
  • B. N. Masina
Conference paper
  • 695 Downloads
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

This study presents the investigation of microstructural and hardness properties of high-speed selective laser melted (SLM) produced Ti6Al4V coupons after various heat treatments. Heat treatment was performed in order to homogenize and improve the microstructure of the as-built Ti6Al4V by transforming the acicular martensitic α’ phase. Optimized heat treatment parameters were selected based on their impact on the transformation of the acicular martensite α’ phase and the phase morphology produced after heat treatment. It was found that sub-transus heat treatments do not completely transform the martensite α’ phase, but result in the decrease in hardness. Heat treatment at 1000 °C, for 2 h followed by furnace cooling, transformed the martensitic α’ phase into a lamella α + β phase. A relationship of hardness, as a function of heat treatment temperature, is also reported.

Keywords

Heat treatment Ti6Al4V Martensite 

References

  1. 1.
    Thijs L, Verhaeghe F, Craeghs T, Van Humbeech J, Kruth J (2010) A study of microstructural evolution during selective laser melting of Ti6Al4V. Acta Mater 50:3303–3312CrossRefGoogle Scholar
  2. 2.
    Vilaro T, Colin C, Bartout JD (2011) As-fabricated and heat-treated microstructures of the Ti6Al4V alloy processed by selective laser melting. Metall Mater Trans 42A:3190–3199CrossRefGoogle Scholar
  3. 3.
    Sallica-Leva E, Caram R, Jardini AL, Fogagnolo JB (2016) Ductility improvement due to martensitic α’ decomposition in porous Ti6Al4V parts produced by selective laser melting for orthopaedic implants. J Mech Behav Biomed Mater 54:149–158CrossRefGoogle Scholar
  4. 4.
    Rafi HK, Karthi NV, Gong H, Starr TL, Stucker BE (2013) Microstructure and mechanical properties of Ti6Al4V parts fabricated by selective laser melting and electron beam melting. J Mater Eng Perform 22:3872–3883CrossRefGoogle Scholar
  5. 5.
    Simonelli M, Tse YY, Tuck C (2014) On the texture formation of selective laser melted Ti6Al4V. Metallugical Mater Trans A 45A:2863–2872CrossRefGoogle Scholar
  6. 6.
    Semiatin SL, Seetharaman V, Weiss I (1997) The thermomechanical processing of alpha/beta titanium alloys. Metals 49(6):33Google Scholar
  7. 7.
    Alcisto J, Enriquez H, Garcia S, Hinkson T, Steelman E, Silverman P, Valdovino H, Gigerenzer J, Foyos J, Ogren J, Dorey K, Karg T, McDonald OS (2011) Es-said, tensile properties and microstructure of laser-formed Ti6Al4V. J Mater Eng Perform 20(2):203–212CrossRefGoogle Scholar
  8. 8.
    William JC, Starke EA (2003) Progress in structural materials for aerospace systems. Acta Mater 51:5575–5799Google Scholar
  9. 9.
    Shipley H, McDonnell D, Culleton R, Coull R, Lupoi G, Odonell D, Trimble D (2018) Optimization of process parameters to address fundamental challenges during selective laser melting of Ti6Al4V: a review. Int J Mach Tool Manuf 128:1–20CrossRefGoogle Scholar
  10. 10.
    Wysocki B, Maj P, Krawczynska A, Rozniatowski K, Zdunek J, Kurzydlowski KJ, Swieszkowiski W (2017) Microstructure and mechanical properties investigation of CP titanium processed by selective laser melting (SLM). J Mater Process Technol 241:13–23CrossRefGoogle Scholar
  11. 11.
    Xu W, Brandt M, Sun S, Elambasseril J, Liu Q, Latham K, Xia K, Qian M (2015) Additive manufacturing of strong and ductile Ti6Al4V by selective laser melting via in situ martensite decomposition. Acta Mater 85:74–84CrossRefGoogle Scholar
  12. 12.
    Dong E, Yu W, Cai Q (2017) Alpha-case kinetics and high temperature plasticity of Ti6Al4V alloy oxidized in different regions. Procedia Eng 207:2149–2154CrossRefGoogle Scholar
  13. 13.
    Vrancken B, Thijs L, Kruth PJ, Van Humbeeck J (2012) Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties. J Alloy Compd 541:177–185CrossRefGoogle Scholar
  14. 14.
    Yan M, Yu P (2015) An overview of densification, microstructure and mechanical properties of additively manufactured Ti6Al4V-comparison among selective laser melting, electron beam melting, laser metal deposition and selective laser sintering, and with conventional powder. Sintered Technol Mater 26:23–37Google Scholar
  15. 15.
    He J, Li D, Jiang W, Ke L, Qin G, Ye Y, Qin Q, Qiu D (2019) The martensitic transformation and mechanical properties of Ti6Al4V prepared via selective laser melting. Materials 12:2–14Google Scholar
  16. 16.
    Gupta A, Khatirkar RK, Kumar A, Parihar S (2018) Investigations on the effect of heating temperature and cooling rate on evolution of microstructure in α+β titanium alloy. J Mater Soc 33:1–12Google Scholar

Copyright information

© The Minerals, Metals & Materials Society 2020

Authors and Affiliations

  • P. M. Lekoadi
    • 1
    Email author
  • N. Maledi
    • 2
  • M. Tlotleng
    • 1
    • 3
  • B. N. Masina
    • 1
  1. 1.CSIR National Laser Centre, Laser Enabled Manufacturing GroupPretoriaSouth Africa
  2. 2.School of Chemical & Metallurgical EngineeringUniversity of the WitwatersrandJohannesburgSouth Africa
  3. 3.Department of Mechanical Engineering ScienceUniversity of JohannesburgJohannesburgSouth Africa

Personalised recommendations