Advertisement

Analysis of Three-Phase Voltage-Source Inverters

  • Rubén Molina LlorenteEmail author
Chapter
  • 35 Downloads
Part of the Advances in Industrial Control book series (AIC)

Abstract

The voltage-source inverter (VSI) is a fundamental power electronic drive where high-performance control for three-phase electrical machines can be achieved. The continuous improvement of power devices that increasingly improve their performance, such as high electron mobility transistor (HEMT) devices, allows higher efficiencies and more and more wide range of use. The inverter is not only a three-phase bridge made by three half-bridge legs but also needs other elements for its correct operation. For example, the stability of the voltage source required by the three-phase bridge is key to optimizing its performance. Also, the inverter and machine protection elements allow having a safe behavior in the abnormal situations that prevent its destruction and other near components. These protection elements which join the control logic constitute the motor control unit (MCU). The analysis of the switching and conduction losses in the power devices is analyzed in detail, as well as the effects of capacitances, inductances, and parasitic resistances. The key elements, such as gate drivers, are also analyzed and even for devices in parallel. The effects of high dv/dt are also analyzed, especially when the length of the connection power cable between the inverter and the machine is considerable, providing different solutions such as the use of sinusoidal filters. In this chapter, all the necessary parts for the design of a VSI for control of three-phase machines are entered in detail, providing simulations and results for better understanding, as well as a complete model of a VSI (power plant).

References

  1. Balogh L (2013) Design and application guide for high speed MOSFET gate drive circuitsGoogle Scholar
  2. Barkhordarian V (1997) Power MOSFET basics. International Rectifier, Technical PaperGoogle Scholar
  3. Beig AR, Ranganathan VT (2006) A novel CSI fed induction motor drive. IEEE Trans Power Electron 21(4):1073–1082CrossRefGoogle Scholar
  4. Bhagwat PM, Stefanovic VR (1983) Generalized structure of a multilevel PWM inverter. IEEE Trans Ind Appl IA-19:1057–1069CrossRefGoogle Scholar
  5. Bierhoff MH, Fuchs FW (2004) Semiconductor losses in voltage source and current source IGBT converters based on analytical derivation 4:2836–2842Google Scholar
  6. Blasko V et al (1998) Sampling of discontinuous voltage and current signals in electric drives-a system approach. IEEE Trans Ind Appl 34(5):1123–1130CrossRefGoogle Scholar
  7. Boglietti A, Carpaneto E (1999) Induction motor high frequency model. In: Proceedings of 34th IEEE industry applications society conference (IAS’99), October 3–7, Phoenix, ARGoogle Scholar
  8. Chen L, Peng FZ (2008) Dead-time elimination for voltage source inverters. IEEE Trans Power Electron 23(2):574–580CrossRefGoogle Scholar
  9. Deng Y, Liang Z, Xia P et al (2019) J Electr Eng Technol 14:219.  https://doi.org/10.1007/s42835-018-00023-7CrossRefGoogle Scholar
  10. Grandi G, Casadei D, Massarini A (1997) High frequency lumped-parameter model for AC motor windings. In: Proceedings of 7th European conference on power electronics and applications (EPE’97), vol 2, pp 578–583, Trondheim, BelgiumGoogle Scholar
  11. Khodaparastan M, Mohamed A (2017) Supercapacitors for electric rail transit system. In: 6th International conference on renewable energy research and application, vol 5, pp 1–6Google Scholar
  12. Kolar JW, Ertl H, Zach FC (1991) Influence of the modulation method on the conduction and switching losses of a PWM converter system. IEEE Trans Ind Appl 27:1063–1075CrossRefGoogle Scholar
  13. Leggate D, Kerkman RJ (1997) Pulse-based dead-time compensator for PWM voltage inverters. IEEE Trans Ind Electron 44(2):191–197CrossRefGoogle Scholar
  14. Munoz-Garcia A, Lipo TA (1998) On-line dead-time compensation technique for open-loop PWM-VSI drives. In: Proceeding of IEEE Applications Power Electronics Conference, Feb. 1998, pp 95–100Google Scholar
  15. Reusch D, Strydom J (2013) Understanding the effect of PCB layout on circuit performance in a high frequency gallium nitride based point of load converter. In: APEC 2013, IEEE transactions on power electronics 2014Google Scholar
  16. Sepe RB et al (1994) Implementation of discrete-time field-oriented current control. IEEE Ind Appl 30(3):723–727CrossRefGoogle Scholar
  17. Sukegawa T, Kamiyama K, Mizuno K, Matsui T, Okuyama T (1991) Fully digital, vector-controlled PWM VSI-Fed ac drives with an inverter dead-time compensation strategy. IEEE Trans Ind Appl 21(3):552–559CrossRefGoogle Scholar
  18. von Jouanne A, Enjeti P (1997) Design considerations for an inverter output filter to mitigate the effects of long motor leads on ASD applications. IEEE Trans Ind Appl 33(5):1138–1145CrossRefGoogle Scholar
  19. Vujacic M, Hammami M, Srndovic M, Grandi G (2018) Analysis of dc-link voltage switching ripple in three-phase PWM inverters. Energies 11(2):471CrossRefGoogle Scholar
  20. Yamamoto Y et al (1992) Digital current control method of induction motor using synchronous current detection with PWM signals. Trans IEE-Japan 112-D(7):613–622Google Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  1. 1.BASc & MSC in Electronic EngineeringUniversitat de BarcelonaBarcelonaSpain

Personalised recommendations