Advertisement

Factors Affecting Lubrication of Pipejacking in Soft Alluvial Deposits

  • Wen-Chieh ChengEmail author
  • Ge Li
Conference paper
Part of the Sustainable Civil Infrastructures book series (SUCI)

Abstract

Inadequate lubrication during pipe ramming can result in exaggerated jacking force leading to damages to the jacked pipe string and adjoining properties. However, a consensus due to limited studies has not yet reached. This study describes a method that can be used to evaluate the lubrication performance by the reduction in the frictional coefficient μ as a function of injection mode, soil and lubrication natures, and pipe deviation. The results of an application of the method to a pipe ramming project in soft alluvial deposits are presented. Compared to 0.4 kPa of the 2–8 m section of the gravel, the excessive pipe deviation, while spanning through the 8-21 m section of the same gravel at Drive C, increases the frictional stress τld to 12.5 kPa, thereby reducing the reduction in the frictional coefficient μ to 71%. At Drive D, the combined effects, resulting from the excessive pipe deviation and the varying face resistance induced by driving into the 11–24 m section of clayey gravel, contribute to the growing frictional stress τld of 4.0 kPa and are deemed as being the major cause leading to the low reduction of 84%. While pipejacking through the 24–31 m section of clayey gravel, the occasional gravel leads to the inability of developing lower face resistance causing the misleading reduction of 60%. To summarise, the excessive pipe deviation and/or the varying face resistance largely affects the percentage reduction in the μ value despite the excessive volumes of injected lubricant. The occasional gravel leads to the misleading reduction.

References

  1. Cui, Q.L., Xu, Y.S., Shen, S.L., Yin, Z.Y., Horpibulsuk, S.: Field performance of concrete pipes during jacking in cemented sandy silt. Tunneling Undergr. Space Technol. 49, 336–344 (2015).  https://doi.org/10.1016/j.tust.2015.05.005CrossRefGoogle Scholar
  2. Pellet-Beacour, A.L., Kastner, R.: Experimental and analytical study of friction forces during microtunneling operations. Tunn. Undergr. Space Technol. 17(1), 83–97 (2002)CrossRefGoogle Scholar
  3. Japan Microtunnelling Association (JMTA): Mictotunnelling Methods Serious II, Design, Construction Management and Rudiments, Japan Microtunnelling Association (JMTA), Tokyo, pp. 69–72 (2013)Google Scholar
  4. German ATV rules and standards: ATV-A 161 E-90. Structural calculation of driven pipes. Hennef, pp. 18–20 (1990)Google Scholar
  5. British standards: BS EN:1594-09 Gas supply system-pipelines for maximum operating pressure over 16 bar-functional requirements. Brussels, pp. 76–78 (2009)Google Scholar
  6. ASTM: Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit under Obstacles Including River Crossings. F 1962-11, West Conshohocken, PA (2011)Google Scholar
  7. The Ministry of Construction of China: GB 50332-02, Structural design code for pipeline of water supply and waste water engineering. Beijing, pp. 11–12 (2002)Google Scholar
  8. Terzaghi, K.: The shearing resistance of saturated soils and the angle between the planes of shear. In: Proceedings of the 1st International Conference on Soil Mechanics and Foundation Engineering. Harvard University Press, Cambridge, MA, pp. 54–56 (1936)Google Scholar
  9. Terzaghi, K.: Theoretical Soil Mechanics, pp. 66–76. Wiley, New York (1943)CrossRefGoogle Scholar
  10. Stein, D., Möllers, K., Bielecki, R.: Microtunneling: Installation and Renewal of Nonman-Size Supply and Sewage Lines by the Trenchless Construction Method. Ernst, Berlin (1989)Google Scholar
  11. Staheli, K.: Jacking force prediction an interface friction approach based on pipe surface roughness. Dissertation, Georgia Institute of Technology (2006)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  1. 1.Xi’an University of Architecture and TechnologyXi’anChina

Personalised recommendations