Advertisement

Electric Lighting Predictions in the Energy Calculation Methods

  • Francesco De LucaEmail author
  • Raimo Simson
  • Hendrik Voll
  • Jarek Kurnitski
Conference paper
Part of the Springer Proceedings in Energy book series (SPE)

Abstract

Electric lighting is one of the major factors for energy consumption of buildings. The European Directive 2010/31/EU states that from 31 December 2020 all new buildings will have to be nearly-Zero Energy Buildings, thus improving electric lighting energy performance is a key issue. The article presents a study and energy figures of power density and electric lighting annual consumptions for different types of buildings, office, commercial and educational, in the northern European country Estonia with the scope to quantify energy savings when using different types of high-efficiency luminaires, occupancy and dimming controls, lighting groups, and daylight contribution. The study has been conducted in relation to the energy performance regulation for new buildings in Estonia. The scope is to develop methods for electric lighting and daylight calculations to be used in compliance assessment with energy requirements. Using different validated software for electric light and daylight simulations the study analyzes three cases for office buildings, single office, open office and meeting room, and one case for both commercial and educational buildings. Results show that average installed power density can be as low as 3.17 W/m2 for office rooms, 3.22 W/m2 for commercial buildings and 2.09 W/m2 for classrooms. The reduction of energy consumption comparing tabulated values can be up 93.3% for office rooms. Also for commercial and educational buildings energy saving are consistent, up to 72.2% and 87.2% respectively. The article presents as well electric light and daylight model specifications and parameters and the different control settings and relative performance.

Keywords

Energy saving Nearly-zero energy buildings Electric lighting Daylight simulations Energy calculation 

Notes

Acknowledgments

The research has been supported by the Estonian Centre of Excellence in Zero Energy and Resource Efficient Smart Buildings and Districts, ZEBE, grant 2014-2020.4.01.15-0016 funded by the European Regional Development Fund, under Institutional research funding grant IUT1-15 and by the Estonian Research Council with Personal research funding grant PUT-652.

Figure source and notes: All the figures have been realized by the authors.

References

  1. 1.
    European Commission. (2010). Commission Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings. Official Journal of the European Union, L 153, 53, 13–35. Retrieved from https://eur-lex.europa.eu/.Google Scholar
  2. 2.
    Estonian Government. (2012). Minimum requirements for energy performance of buildings (Energiatõhususe miinimumnõuded). Passed 30.8.2012, Annex 68, Tallinn. Retrieved form https://www.riigiteataja.ee/en/eli/520102014001.
  3. 3.
    Krarti, M. (2010). Energy audit of building systems: An engineering approach. Boca Raton: CRC Press. ISBN 9781439828717.Google Scholar
  4. 4.
    Nazaroff, W. W. (2014). Illumination, lighting technologies, and indoor environmental quality. Indoor Air, 24(3), 225–226.CrossRefGoogle Scholar
  5. 5.
    Ponmalar, V., & Ramesh, B. (2014). Energy efficient building design and estimation of energy savings from daylighting in Chennai. Energy Engineering, 111(4), 59–80.CrossRefGoogle Scholar
  6. 6.
    Gago, E. J., Muneer, T., Knez, M., & Koster, H. (2015). Natural light controls and guides in buildings. Energy saving for electrical lighting, reduction of cooling load. Renewable and Sustainable Energy Reviews, 41, 1–13.CrossRefGoogle Scholar
  7. 7.
    International Energy Agency. (2006). Light’s labour’s lost policies for energy-efficient lighting. Paris: IEA Head of Publications Service. Retrieved from https://www.iea.org/publications/freepublications/publication/light2006.pdf.CrossRefGoogle Scholar
  8. 8.
    Energy Saving Trust. (2006). Energy efficient lighting—Guidance for installers and specifiers. CE61. London: Energy Saving Trust. Retrieved from http://www.rebelenergy.ie/ce61.pdf.
  9. 9.
    Pattison, P. M., Hansen, M., & Tsao, J. Y. (2009). LED lighting efficacy: Status and directions. Comptes Rendus Physique, 41, 285–286.Google Scholar
  10. 10.
    Loe, D. (2018). Energy efficiency in lighting—Considerations and possibilities. Lighting Research and Technology, 19, 134–145.Google Scholar
  11. 11.
    European Committee for Standardization. (2011). Standard EN12464-1:2011 Light and lighting—Lighting of work places—Part 1: Indoor work places. Brussels: Management Centre. Retrieved from https://www.cen.eu/Pages/default.aspx.Google Scholar
  12. 12.
    Galasiu, A. D., Newsham, G. R., Suvagau, C., & Sander, D. M. (2007). Report NRCC-49498 Energy saving lighting control systems for open-plan offices: A field study. Ottawa: Institute for Research in Construction, National Research Council of Canada. Retrieved from https://nparc.nrc-cnrc.gc.ca/eng/view/accepted/?id=b23dfd7d-3280-4740-b2fa-c57cd48806e9.Google Scholar
  13. 13.
    Haase, M., Skeie, K. S., & Woods, R. (2015). The key drivers for energy retrofitting of European shopping centres. Energy Procedia, 78(C), 2298–2303.CrossRefGoogle Scholar
  14. 14.
    Chew, I., Karunatilaka, D., Tan, C. P., & Kalavally, V. (2017). Smart lighting: The way forward? Reviewing the past to shape the future. Energy and Buildings, 149, 180–191.CrossRefGoogle Scholar
  15. 15.
    Dubois, M. C., & Blomsterberg, A. (2011). Energy saving potential and strategies for electric lighting in future North European, low energy office buildings: A literature review. Energy and Buildings, 43(10), 2572–2582.CrossRefGoogle Scholar
  16. 16.
    Pandharipande, A., & Newsham, G. R. (2018). Lighting controls: Evolution and revolution. Lighting Research & Technology, 50, 115–128.CrossRefGoogle Scholar
  17. 17.
    Yu, X., & Su, Y. H. (2015). Daylight availability assessment and its potential energy saving estimation—A literature review. Renewable and Sustainable Energy Reviews, 52, 494–503.CrossRefGoogle Scholar
  18. 18.
    Rossi, M., Pandharipande, A., Caicedo, D., Schenato, L., & Cenedese, A. (2015). Personal lighting control with occupancy and daylight adaptation. Energy and Buildings, 105, 263–272.CrossRefGoogle Scholar
  19. 19.
    Montoya, F. G., Pena-Garcia, A., Juaidi, A., & Manzano-Agugliaro, F. (2017). Indoor lighting techniques: An overview of evolution and new trends for energy saving. Energy and Buildings, 140, 50–60.CrossRefGoogle Scholar
  20. 20.
    Gayral, B. (2017). LEDs for lighting: Basic physics and prospects for energy savings. Comptes Rendus Physique, 18, 453–461.CrossRefGoogle Scholar
  21. 21.
    Ahn, B.-L., Jang, C.-Y., Leigh, S.-B., & Jeong, H. (2014). Analysis of the effect of artificial lighting on heating and cooling energy in commercial buildings. Energy Procedia, 61(Supplement C), 928–932.CrossRefGoogle Scholar
  22. 22.
    Hee, W. J., Alghoul, M. A., Bakhtyar, B., Elayeb, O., Shameri, M. A., Alrubaih, M. S., & Sopian, K. (2015). The role of window glazing on daylighting and energy saving in buildings. Renewable and Sustainable Energy Reviews, 42, 323–343.CrossRefGoogle Scholar
  23. 23.
    Shen, E., Hu, J., & Patel, M. (2014). Energy and visual comfort analysis of lighting and daylight control strategies. Building and Environment, 78, 155–170.CrossRefGoogle Scholar
  24. 24.
    De Luca, F., Voll, H., & Thalfeldt, M. (2016). Horizontal or vertical? Windows’ layout selection for shading devices optimization. Management of Environmental Quality: An International Journal, 27(6), 623–633.CrossRefGoogle Scholar
  25. 25.
    De Luca, F., Simson, R., & Kurnitski, J. (2016). Energy and daylighting performance design of skylights and clerestories in a large hall retail building. In Proc. Clima 2016—12th REHVA World Congress, 22–25 May 2016 (Vol. 2). Aalborg University, Department of Civil Engineering, Aalborg, Denmark. Retrieved from http://vbn.aau.dk/en/publications/clima-2016%2D%2Dproceedings-of-the-12th-rehva-world-congress(f66ed00a-82ec-4f39-a4e9-f943ef3b44ee).html.
  26. 26.
    Estonian Government. (2012). Methodology for calculating the energy performance of buildings (Hoone energiatõhususe arvutamise metoodika). Passed 08.10.2012 Annex 63, Tallinn. Retrieved from https://www.riigiteataja.ee/en/eli/ee/MKM/reg/520102014002/consolide.
  27. 27.
    Reinhart, C. F., Mardaljevic, J., & Rogers, Z. (2006). Dynamic daylight performance metrics for sustainable building design. Leukos, 3(1), 7–31.CrossRefGoogle Scholar
  28. 28.
    Reinhart, C. F. (2004). Lightswitch-2002: A model for manual and automated control of electric lighting and blinds. Solar Energy, 77(1), 15–28.CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Francesco De Luca
    • 1
    Email author
  • Raimo Simson
    • 1
  • Hendrik Voll
    • 1
  • Jarek Kurnitski
    • 1
    • 2
  1. 1.Department of Civil Engineering and ArchitectureTallinn University of TechnologyTallinnEstonia
  2. 2.Department of Civil EngineeringAalto UniversityEspooFinland

Personalised recommendations