Advertisement

Proposal of a New Based Scenarios Eco-Manufacturing Methodology on CAD Phase

  • Hadhami Ben Slama
  • Raoudha Gaha
  • Abdelmajid Benamara
Conference paper
  • 68 Downloads
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The integration of environmental aspects in the design process is getting more and more covered by the scientific research. Owing to the issued regulations, industries tend to reduce their environmental impacts (EIs) while keeping a minimal manufacturing cost. The process plan operations order has an influence on the EIs and cost of a product. In this paper, we propose a new based scenarios methodology by using feature technology (FT) which allows the non-environmental expert designer to choose the most optimal manufacturing scenario with the best compromise EIs/Cost. First, we present an overview of works using the FT in CAD phase to reduce EIs and cost of a manufacturing process. Secondly, we propose a new methodology based on both FT and scenarisation which helps inexperienced eco-designers. Finally, a case study is considered to validate the proposed approach.

Keywords

CAD Eco-design Eco-manufacturing Environmental impact Cost/scenarios 

References

  1. 1.
    Sheng P, Srinivasan M, Kobayashi S (1995) Multi-objective process planning in environmentally conscious. Department of Mechanical Engineering, University of California, Berkeley, CA, USAGoogle Scholar
  2. 2.
    Cao HJ, Liu F, He Y, Zhang H (2002) Study on model set based process planning strategy for green manufacturing. Jisuanji Jicheng Zhizao Xitong/Comput Integr Manuf Syst (China) 8(12):978–982Google Scholar
  3. 3.
    Tan X, Liu F, Dacheng L, Li Z, Wang H, Zhang Y (2006) Improved methods for process routing in enterprise production processes in terms of sustainable development II. Tsinghua Sci Technol 11(6):693–700CrossRefGoogle Scholar
  4. 4.
    Zhao F, Murray VR, Ramani K, Sutherland JW (2012) Toward the development of process plans with reduced environmental impacts. Front Mech Eng 1–16Google Scholar
  5. 5.
    Gaha R, Yannou B, Benamara A (2015) Selection of green manufacturing process based on CAD-features. Int J Adv Manuf Technol.  https://doi.org/10.1007/s00170-015-7499-yCrossRefGoogle Scholar
  6. 6.
    Gaha R, Benamara A, Yannou B (2014) Eco-design of a basin mixer in geometric modeling phase. In: Key engineering materials, vol 572. Trans Tech Publications, pp 7–11Google Scholar
  7. 7.
    Gaha R, Benamara A, Yannou B (2013) A feature-based methodology for eco-designing parts on detail phase. In: Design and modeling of mechanical systems. Springer, Berlin, pp 645–654Google Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Hadhami Ben Slama
    • 1
  • Raoudha Gaha
    • 2
  • Abdelmajid Benamara
    • 1
  1. 1.Laboratoire de Génie Mécanique de MonastirEcole Nationale D’ingénieurs de Monastir, Université de MonastirMonastirTunisie
  2. 2.Laboratoire de Mécanique de SousseEcole Nationale D’Ingénieurs de Sousse, Université de SousseSousseTunisie

Personalised recommendations