Advertisement

Advancement of Surgical Bone Drills: A Case Study of Notched K-Wires

  • Albert J. Shih
  • Bruce L. Tai
  • Rui Li
Chapter

Abstract

This chapter presents a case study on a modified K-wire tip, namely “notched K-wires,” to aid debris storage, thus reduce heat generation. K-wire is known for high drilling temperature, but it is still being used in orthopaedic surgery as a guidewire for cannulated drilling or a drill for fracture fixation. The heating problem of K-wires is due to the solid trocar design without cutting flutes to remove and evacuate bone debris. The design and manufacturing method, and the experiment study are presented in this chapter.

Keywords

K-wire Bone debris in drilling Bone temperature 

References

  1. 1.
    Piska M, Yang L, Reed M, Saleh M (2002) Drilling efficiency and temperature elevation of three types of Kirschner-wire point. J Bone Joint Surg 84:137–140CrossRefGoogle Scholar
  2. 2.
    Smith & Nephew Drill Wire Module (2019) A new spin on traditional K-wires. pp 1–4Google Scholar
  3. 3.
    Tai BL, Nonoyama F, Wang Y, Shih AJ (2014) Enhancement of Kirschner wire for bone drilling. In: Proceedings of ASME international manufacturing science and engineering conference (MSEC2014), Detroit, Michigan. pp 1–6Google Scholar
  4. 4.
    Belmont B, Li W, Shih A, Tai B (2014) Micromilling of surface pattern for enhanced Kirschner wire bone drilling. In: The ninth international workshop on microfactories, Honolulu, Hawaii. pp 1–5Google Scholar
  5. 5.
    Karaca F, Aksakal B (2013) Effects of various drilling parameters on bone during implantology: an in vitro experimental study. Acta Bioeng Biomech 15:25–32PubMedGoogle Scholar
  6. 6.
    Schmidt A, Roubik J (1949) Distribution of heat generated in drilling. Trans ASME 71:242–245Google Scholar
  7. 7.
    Komanduri R, Hou ZB (2001) A review of the experimental techniques for the measurement of heat and temperatures generated in some manufacturing processes and tribology. Tribol Int 34:653–682CrossRefGoogle Scholar
  8. 8.
    Luo Y, Chen L, Shih A (2019) Hollow notched K-wires for bone drilling with through-tool cooling, J Orthopaedic Research. https://doi.org/10.1002/jor.24419.Google Scholar
  9. 9.
    Luo L, Chen L, Finney F, Park DW, Talusan PG, Holmes JR, Shih AJ (2019) Evaluation of heat generation in unidirectional versus oscillatory modes during K-wire insertion in bone, Journal of Orthopaedic Research 37:1903–1909.Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Albert J. Shih
    • 1
  • Bruce L. Tai
    • 2
  • Rui Li
    • 3
  1. 1.Mechanical EngineeringUniversity of MichiganAnn ArborUSA
  2. 2.Mechanical EngineeringTexas A&M UniversityCollege StationUSA
  3. 3.China Aerospace Science and Technology CorporationBeijingChina

Personalised recommendations