Advertisement

Assessment of Pentelic Marble Surfaces After Ammonium Oxalate Protective Treatments

  • I. Ntoutsi
  • G. Frantzi
  • E. T. Delegou
  • P. Tsakiridis
  • G. Fourlaris
  • A. MoropoulouEmail author
Conference paper
Part of the Springer Proceedings in Materials book series (SPM)

Abstract

The artificial oxalate method has been thoroughly studied over the last decades as a compatible and performing protective treatment for marbles and other calcite stones. In this study, the most widely used synthesis (5% w/v ammonium oxalate aqueous solution) was applied by brushing on pentelic marble surfaces and assessed in terms of surface texture alterations. Three differently textured marble surfaces were produced in terms of roughness levels, and were measured by a mechanical roughness meter. Scanning Electron Microscopy (SEM) proved to be an indispensable tool in order to investigate the morphological alterations of the process through the comparison of the original surface texture with the one induced by the conversion of calcite into calcium oxalate. The calcium oxalate formation was verified by Raman spectroscopy, where whewellite was clearly detected. Finally, the digital imaging processing of the SEM images served as an indicative tool for the quantification of the process, regarding the surface percentage that is covered by the newly formed calcium oxalate.

Keywords

Raman SEM Calcium oxalate Protection Stone Pentelic marble 

Notes

Funding

The authors declare that no funding was received, while performing the research presented in this paper. This research was performed at the National Technical University of Athens (NTUA) and it is part of the Master Thesis of G. Frantzi, who is employed by the Acropolis Restoration Service (YSMA).

Competing Interests

The authors declare that there is no conflict of interest regarding the publication of this paper.

Availability of Data and Materials

Available upon request by the authors.

References

  1. 1.
    Hansen, E., Doehne, E., Fidler, J., Larson, J., Martin, B., Matteini, M., Teutonico, J.M.: A review of selected inorganic consolidants and protective treatments for porous calcareous materials. Stud. Conserv. 48(sup1), 13–25 (2003)CrossRefGoogle Scholar
  2. 2.
    Saba, M., Quiñones-Bolaños, E.E., López, A.L.B.: A review of the mathematical models used for simulation of calcareous stone deterioration in historical buildings. Atmos. Environ. 180, 156–166 (2018)CrossRefGoogle Scholar
  3. 3.
    Comite, V., de Buergo, M.Á., Barca, D., Belfiore, C.M., Bonazza, A., La Russa, M.F., Ruffolo, S.A.: Damage monitoring on carbonate stones: field exposure tests contributing to pollution impact evaluation in two Italian sites. Constr. Build. Mater. 152, 907–922 (2017)CrossRefGoogle Scholar
  4. 4.
    Bonazza, A., Sabbioni, C., Messina, P., Guaraldi, C., De Nuntiis, P.: Climate change impact: mapping thermal stress on Carrara marble in Europe. Sci. Total Environ. 407(15), 4506–4512 (2009)CrossRefGoogle Scholar
  5. 5.
    Sassoni, E., Graziani, G., Franzoni, E.: Repair of sugaring marble by ammonium phosphate: comparison with ethyl silicate and ammonium oxalate and pilot application to historic artifact. Mater. Des. 88, 1145–1157 (2015)CrossRefGoogle Scholar
  6. 6.
    Doherty, B., Pamplona, M., Selvaggi, R., Miliani, C., Matteini, M., Sgamellotti, A., Brunetti, B.: Efficiency and resistance of the artificial oxalate protection treatment on marble against chemical weathering. Appl. Surf. Sci. 253(10), 4477–4484 (2007)CrossRefGoogle Scholar
  7. 7.
    Naidu, S., Blair, J., Scherer, G.W.: Acid-resistant coatings on marble. J. Am. Ceram. Soc. 99, 3421–3428 (2016)CrossRefGoogle Scholar
  8. 8.
    Kapridaki, C., Maravelaki-Kalaitzaki, P.: TiO2–SiO2–PDMS nano-composite hydrophobic coating with self-cleaning properties for marble protection. Prog. Org. Coat. 76(2–3), 400–410 (2013)CrossRefGoogle Scholar
  9. 9.
    Franzoni, E., Pigino, B., Pistolesi, C.: Ethyl silicate for surface protection of concrete: performance in comparison with other inorganic surface treatments. Cem. Concr. Compos. 44, 69–76 (2013)CrossRefGoogle Scholar
  10. 10.
    Matteini, M.: Inorganic treatments for the consolidation and protection of stone artefacts. Conserv. sci. cult. herit. 8(1), 13–27 (2008)Google Scholar
  11. 11.
    Rampazzi, L., Andreotti, A., Bonaduce, I., Colombini, M.P., Colombo, C., Toniolo, L.: Analytical investigation of calcium oxalate films on marble monuments. Talanta 63(4), 967–977 (2004)CrossRefGoogle Scholar
  12. 12.
    Polykreti, K., Maniatis, Y., Doganis, Y., Galanos, A., Valavanis, P.: Analysis of the orange-brown patina on marble surfaces from the Olympieion in comparison with a similar patina from the Propylaea, Acropolis. In: Fakorellis, Y., Zacharias, N., Polykreti, K. (eds.) Proceedings of the 4th Symposium of the Hellenic Society for Archaeometry, BAR International Series, Athens, vol. 1746, pp. 659–666 (2008)Google Scholar
  13. 13.
    Graziani, G., Sassoni, E., Scherer, G.W., Franzoni, E.: Resistance to simulated rain of hydroxyapatite-and calcium oxalate-based coatings for protection of marble against corrosion. Corros. Sci. 127, 168–174 (2017)CrossRefGoogle Scholar
  14. 14.
    Sassoni, E., Graziani, G., Ridolfi, G., Bignozzi, M.C., Franzoni, E.: Thermal behavior of Carrara marble after consolidation by ammonium phosphate, ammonium oxalate and ethyl silicate. Mater. Des. 120, 345–353 (2017)CrossRefGoogle Scholar
  15. 15.
    Mudronja, D., Vanmeert, F., Hellemans, K., Fazinic, S., Janssens, K., Tibljas, D., Jakovljevic, S.: Efficiency of applying ammonium oxalate for protection of monumental limestone by poultice, immersion and brushing methods. Appl. Phys. A 111(1), 109–119 (2013)CrossRefGoogle Scholar
  16. 16.
    Ruiz-Agudo, E., Álvarez-Lloret, P., Putnis, C.V., Rodriguez-Navarro, A.B., Putnis, A.: Influence of chemical and structural factors on the calcite–calcium oxalate transformation. CrystEngComm 15(46), 9968–9979 (2013)CrossRefGoogle Scholar
  17. 17.
    Avdelidis, N.P., Delegou, E.T., Almond, D.P., Moropoulou, A.: Surface roughness evaluation of marble by 3-D laser profilometry and pulsed thermography. J. NDT & E Int. 37(7), 571–575 (2004)CrossRefGoogle Scholar
  18. 18.
    Abràmoff, M.D., Magalhães, P.J., Ram, S.J.: Image processing with ImageJ. Biophoton. Int. 11(7), 36–42 (2004)Google Scholar
  19. 19.
    EN 15886: Conservation of cultural property – Test methods – Color measurement of surfaces (2010)Google Scholar
  20. 20.
    Conti, C., Colombo, C., Dellasega, D., Matteini, M., Realini, M., Zerbi, G.: Ammonium oxalate treatment: evaluation by μ-Raman mapping of the penetration depth in different plasters. J. Cult. Herit. 12(4), 372–379 (2011)CrossRefGoogle Scholar
  21. 21.
    Ma, Q., He, H., Liu, C.: Hygroscopic properties of oxalic acid and atmospherically relevant oxalates. Atmos. Environ. 69, 281–288 (2013)CrossRefGoogle Scholar
  22. 22.
    Conti, C., Aliatis, I., Casati, M., Colombo, C., Matteini, M., Negrotti, R., Zerbi, G.: Diethyl oxalate as a new potential conservation product for decayed carbonatic substrates. J. Cult. Herit. 15(3), 336–338 (2014)CrossRefGoogle Scholar
  23. 23.
    Gunasekaran, S., Anbalagan, G.: Spectroscopic characterization of natural calcite minerals. Spectrochim. Acta Part A Mol. Biomol. Spectrosc. 68(3), 656–664 (2007)CrossRefGoogle Scholar
  24. 24.
    Donnet, M., Jongen, N., Lemaitre, J., Bowen, P.: New morphology of calcium oxalate trihydrate precipitated in a segmented flow tubular reactor. J. Mater. Sci. Lett. 19(9), 749–750 (2000)CrossRefGoogle Scholar
  25. 25.
    Alexakis, E., Delegou, E.T., Lampropoulos, K.C., Apostolopoulou, M., Ntoutsi, I., Moropoulou, A.: NDT as a monitoring tool of the works progress and the assessment of materials and rehabilitation interventions at the Holy Aedicule of the Holy Sepulchre. Constr. Build. Mater. 189, 512–526 (2018)CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • I. Ntoutsi
    • 1
  • G. Frantzi
    • 2
  • E. T. Delegou
    • 1
  • P. Tsakiridis
    • 3
  • G. Fourlaris
    • 3
  • A. Moropoulou
    • 1
    Email author
  1. 1.Laboratory of Materials Science and Engineering, School of Chemical EngineeringNational Technical University of AthensAthensGreece
  2. 2.Acropolis Restoration Service (YSMA)Hellenic Ministry of Culture and SportsAthensGreece
  3. 3.Laboratory of Physical Metallurgy, School of Mining and Metallurgical EngineeringNational Technical University of AthensAthensGreece

Personalised recommendations