Advertisement

Abstract

Large reserves and worldwide availability of coal indicate that this energy will play an important role for electricity generation in the future even if there is a significant increase in production from renewables. Besides that, the electricity market is open and the result is competition between the market actors. The goals of advanced thermal power plants are using as less as possible input energy to generate electricity as much as possible and reducing the CO2 emission. In thermal power plants, 7–15% of the generated energy on the generator does not reach the power plant’s threshold because it is geared back to pumps, fans and other auxiliary power systems. Given the fact that each MWh is important today, it is clear that auxiliary power systems of advanced thermal power plants must be energy efficient. In this paper contemporary regulated auxiliary power systems of advanced thermal power plant “Stanari” are presented. After an introduction, fresh air fan, flue gas fan and feed water pump analysis are presented. In addition, the paper analyzes the total power change of auxiliary power systems, depending on the change of the generator power. The most important findings are summarized at the end of the paper.

References

  1. 1.
    Next-Generation Thermal Power Generation, focus NEDO No. 62 (2017)Google Scholar
  2. 2.
    Li,Y., Wen, Y.: Influence of plant steam system on thermal economy of thermal power plant and energy strategy. In: International Conference on Future Electrical Power and Energy Systems (2012)Google Scholar
  3. 3.
    Owusu, P.A., Asumadu Sarkodie, S.: A review of renewable energy sources, sustainability issues and climate change mitigation. Civil and Environmental Engineering (2016)Google Scholar
  4. 4.
    Islam, M.A., Hasanuzzaman, M., Rahim, N.A., Nahar, A., Hosenuzzaman, M.: Global renewable energy-based electricity generation and smart grid system for energy security. Sci. World J. (2014)Google Scholar
  5. 5.
    World coal association. https://www.worldcoal.org/. Accessed 20 Aug 2017
  6. 6.
    Alobaid, F., Mertens, N., Starkloff, R., Lanz, T., Heinze, C., Epple, B.: Progress in dynamic simulation of thermal power plants. Prog. Energy Combust. Sci. 59, 79–162 (2017)Google Scholar
  7. 7.
    ABB, Power generation - energy efficient design of auxiliary systems in fossil-fuel power plants (2009)Google Scholar
  8. 8.
    Kuzle, I., Bošnjak, D., Pandži, H.: Auxiliary system load schemes in large thermal and nuclear power plants. In: 8th International Conference: Nuclear Option in Countries with Small and Medium Electricity Grids, Dubrovnik (2010)Google Scholar
  9. 9.
    Hesler, S.: Mitigating the effects of flexible operation on coal-fired power plants. Electric Power Research (2011)Google Scholar
  10. 10.
    Energiewende, A.: Flexibility in thermal power plants – with a focus on existing coal-fired power plants (2017)Google Scholar
  11. 11.
    Miljević, D., Mumović, M., Kopač, J.: Analysis of direct and selected indirect subsidies to coal electricity production in the energy community contracting parties (2019)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Azrina Avdić
    • 1
  • Tatjana Konjić
    • 1
  • Nedis Dautbašić
    • 2
    Email author
  1. 1.Faculty of Electrical EngineeringUniversity of TuzlaTuzlaBosnia and Herzegovina
  2. 2.Faculty of Electrical EngineeringUniversity of SarajevoSarajevoBosnia and Herzegovina

Personalised recommendations