Advertisement

Determination of Effective Protection Distance in Front of Surge Protective Devices in Low Voltage Systems

  • Vladan RadulovićEmail author
  • Zoran Miljanić
Conference paper
Part of the Lecture Notes in Networks and Systems book series (LNNS, volume 83)

Abstract

Surge protective devices (SPDs) is widely used in low-voltage power systems for protection of devices and equipment against surges. The SPDs provide the optimized protection level only if it is installed directly across the terminals of the equipment to be protected. However, it is not always possible to locate SPD close to the protected equipment, and an inevitable separation distance along connecting cable exists. Maximum distance along cable from point of SPD connection for which desirable protective characteristics are still fulfilled represents effective protection distance of SPD. Effective protection distance is usually determined for cable length after location of SPDs toward protected equipment. However, it is known that SPD provides protective effects also on devices installed at certain distance before location of SPDs. Determination of effective protection distance in front of SPD installed in low-voltage power system has been given in the paper. Analyses are performed with extensive number of simulations in MATLAB and ATP/EMTP with different influencing parameters in wide ranges of values, and with application of standard surge testing waveforms.

References

  1. 1.
    Radulovic, V., Durkovic, V.: Surge protection of resistive loads in low voltage power installations. In: 23rd International Scientific-Professional Conference on Information Technology (IT), Zabljak, Montenegro (2015)Google Scholar
  2. 2.
    Radulovic, V., Mujovic, S., Miljanic, Z.: Characteristics of overvoltage protection with cascade application of surge protective devices in low-voltage AC power circuits. Adv. Electr. Comput. Eng. 15(3), 153–160 (2015)CrossRefGoogle Scholar
  3. 3.
    He, J., Yuan, Y., Xu, J., Chen, S., Zou, J., Zeng, R.: Evaluation of the effective protection distance of low-voltage SPD to equipment. IEEE Trans. Power Del. 20(1), 123–130 (2005)CrossRefGoogle Scholar
  4. 4.
    Radulovic, V., Skuletic, S.: Influence of Combination Wave Generator’s current undershoot on overvoltage protective characteristics. IEEE Trans. Power Del. 26(1), 152–160 (2011)CrossRefGoogle Scholar
  5. 5.
    Ziyu, H., Du, Y.: Influence of different impulse waveforms on coordination of two cascaded SPDs. In: 32nd International Conference on Lightning Protection, Shanghai (2014)Google Scholar
  6. 6.
    Lai, J.-S., Martzloff, F.: Coordinating cascaded surge protection devices: high-low versus low-high. IEEE Trans. Ind. Appl. 29(4), 680–687 (1993)CrossRefGoogle Scholar
  7. 7.
    She, C., Lei, S.: Analysis of two-stage cascade SPD coordination under the impact of lightning combination wave in 220 V low-voltage distribution system. In: 7th Asia-Pacific International Conference on Lightning, APL 2011, Chengdu (2011)Google Scholar
  8. 8.
    Skuletic, S., Radulovic, V.: Analysis of surge protection performance in low-voltage AC systems with capacitive load. In: 45th International Universities Power Engineering Conference, UPEC 2010, Cardiff, Wales, UK (2010)Google Scholar
  9. 9.
    Skuletic, S., Radulovic, V.: Optimization and protective distance of surge protective devices in low-voltage AC circuits. In: 6th International Universities’ Power Engineering Conference, UPEC 2011, Soest, Germany (2011)Google Scholar
  10. 10.
    Hotchkiss, R.W.: Performance testing of surge protective devices for low-voltage AC power circuits: approach of the IEEE. In: IEEE Power and Energy Society General Meeting, Detroit, MI, USA (2011)Google Scholar
  11. 11.
    Shunchao, W., Jinliang, H.: Discussion on worst distance between SPD and protected device. IEEE Trans. Electromagn. Compat. 53(4), 1081–1083 (2011)CrossRefGoogle Scholar
  12. 12.
    Skuletic, S., Radulovic, V.: Effective protection distance from cascade coordinated surge protective devices to equipment in low–voltage AC power circuits. In: 43rd International Universities Power Engineering Conference, UPEC 2008, Padova, Italy (2008)Google Scholar
  13. 13.
    Low-voltage surge protective devices - Part 12: Surge protective devices connected to low-voltage power distribution systems - Selection and application principles, IEC 61643-12 standard (2008)Google Scholar
  14. 14.
    He, J.: Discussions on factors influencing the effective protection distance of SPD to loads. In: Asia-Pacific Symposium on Electromagnetic Compatibility (APEMC), Taipei (2015)Google Scholar
  15. 15.
    IEEE Guide on the Surge Environment in Low-Voltage (1000 V and Less) AC Power Circuits, IEEE C62.41.1-2002 Standard, April 2003Google Scholar
  16. 16.
    IEEE Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less) AC Power Circuits, IEEE C62.41.2-2002 Standard, April 2003Google Scholar
  17. 17.
    IEEE Recommended Practice on Surge Testing for Equipment Connected to Low-Voltage (1000 V and Less) AC Power Circuits, IEEE C62.45-2002 Standard, April 2003Google Scholar
  18. 18.
    Insulation coordination for equipment within low-voltage systems –Part 1: Principles, requirements and tests, IEC Std. 60664-1 Standard (2002)Google Scholar
  19. 19.
    Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods, IEC 61643-11 Standard, March 2011Google Scholar
  20. 20.
    Protection againts lightning - Part 4: Electrical and electronic systems within structures, IEC Std. 62305-4 Standard (2006)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  1. 1.Faculty of Electrical EngineeringUniversity of MontenegroPodgoricaMontenegro

Personalised recommendations