Advertisement

Validation of Novel System Identification Approach Based on Forced Oscillations Using Open-Loop Experiment

  • Rijad SarićEmail author
  • Edhem Čustović
  • Dejan Jokić
  • Željko Jurić
Conference paper
Part of the Lecture Notes in Networks and Systems book series (LNNS, volume 83)

Abstract

The parametric identification is the primary consideration in developing a sophisticated automated control system. However, most tuning and system identification methods require the use of non-standard equipment such as relay which could cause a significant error and in turn affect the accuracy of the entire industrial process. The novel approach to the system identification in closed-loop feedback is similar to old Ziegler-Nichols (ZN) experiment, but it does not include any additional equipment while identifying the points in three quadrants in the Nyquist diagram. After applying this method to identify one complex object i.e. servomechanism with only damped oscillations, it is necessary to validate the correctness of the obtained model. Conducting the laboratory experiment in the open-loop loop represents the best way of verifying stated approach, since the transfer function including the Nyquist diagram of the model may provide enough data for further analysis. The verification laboratory experiments confirmed applicability together with the effectiveness of the new method in considerably less idealized conditions compared to computer-based simulations.

Keywords

Object identification Open-loop Ziegler-Nichols Nyquist diagram 

References

  1. 1.
    Sidorov, D.N.: Modelling of non-linear non-stationary dynamic systems by volterra series approach (VSA). J. Ind. Math. 3, 182–194 (2000)Google Scholar
  2. 2.
    Ljung, L., Söderström, T.: Theory and Practice of Recursive Identification, 2nd edn. MIT Press, Cambridge, Massachusetts (1985)zbMATHGoogle Scholar
  3. 3.
    Pierre, D.A.: Optimization Theory with Applications. Dover Publications Inc., New York (1986)Google Scholar
  4. 4.
    Ziegler, J.G., Nichols, N.B.: Optimal settings for automatic controllers. Trans. ASME 64, 759–768 (1942)Google Scholar
  5. 5.
    Åström, K.J., Hägglund, T.: PID Controllers, 2nd ed. Instrument Society of America, North Carolina (1995)Google Scholar
  6. 6.
    Åström, K.J., Hägglund, T.: Automatic tuning of simple regulators with specifications on phase and amplitude margins. Automatica 20, 645–651 (1984)MathSciNetCrossRefGoogle Scholar
  7. 7.
    Friman, M., Waller, K.V.: A two-channel relay for autotuning. Ind. Eng. Chem. Res. 36(7), 2662–2671 (1997)CrossRefGoogle Scholar
  8. 8.
    Li, W., Eskinat, E., Luyben, W.L.: An improved autotune identification method. Ind. Eng. Chem. Res. 30(7), 1530–1541 (1991)CrossRefGoogle Scholar
  9. 9.
    Scali, C., Marchetti, G., Semino, D.: Relay with additional delay for identification and autotuning of completely unknown processes. Ind. Eng. Chem. Res. 38(5), 1987–1997 (1999)CrossRefGoogle Scholar
  10. 10.
    Jurić, Ž., Peruničić, B.: A method for closed-loop identification of Nyquist curve in three quadrants. Electr. Eng. 89(3), 251–261 (2007)CrossRefGoogle Scholar
  11. 11.
    Jurić, Ž., Peruničić, B.: A method for parametric closed-loop identification of plants with finite zeros. In: IEEE Mediterranean Conference on Control & Automation MED’04, pp. 1050–1055. Kuşadasi, Turkey, June 2004Google Scholar
  12. 12.
    Sarić, R., Čustović, E., Jurić, Ž.: Compensated PID regulation of ambient temperature using new approach to the system identification based on forced oscillations. In: 2018 5th International Conference on Control, Decision and Information Technologies (CoDIT), pp. 581–586. Thessaloniki (2018).  https://doi.org/10.1109/codit.2018.8394811
  13. 13.
    Jurić, Ž., Peruničić, B.: A method for closed-loop identification of plants with unknown delay. In: IFAC TDS’04 Conference. Leuven, Belgium, August 2004, art. no. 156Google Scholar
  14. 14.
    Jurić, Ž., Peruničić, B.: A new method for the closed-loop identification based on the enforced oscillations. In: IASTED International Conference on Modelling, Identification and Control, MIC 2004, 23, pp. 85–91. Grindelwald, Switzerland, February 2004Google Scholar
  15. 15.
    Ishak, N., Abdullah, N.I., Rahiman, M.H.F., Samad, A.M., Adnan, R.: Model identification and controller design for servomotor. In: 2010 6th International Colloquium on Signal Processing & Its Applications, pp. 1–4. Mallaca City (2010).  https://doi.org/10.1109/cspa.2010.5545294
  16. 16.
    Byeon, J., Kim, J.-S., Chun, D., Sung, S.W., Lee, J.: Third quadrant Nyquist point for the autotuning of PI controllers. In: 2009 ICCAS-SICE, pp. 3283–3286. Fukuoka (2009)Google Scholar
  17. 17.
    Shanshiashvili, B., Bolkvadzame, G.: Identification and modeling of the nonlinear dynamic open loop systems. In: 2012 IV International Conference “Problems of Cybernetics and Informatics” (PCI), pp. 1–4. Baku (2012).  https://doi.org/10.1109/icpci.2012.6486373

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Rijad Sarić
    • 1
    Email author
  • Edhem Čustović
    • 2
  • Dejan Jokić
    • 1
  • Željko Jurić
    • 3
  1. 1.Faculty of Engineering and Natural SciencesInternational Burch UniversitySarajevoBosnia and Herzegovina
  2. 2.School of Engineering and Mathematical SciencesLa Trobe UniversityMelbourneAustralia
  3. 3.Faculty of Electrical EngineeringUniversity of SarajevoSarajevoBosnia and Herzegovina

Personalised recommendations