Advertisement

Coatings

  • Stefano Gialanella
  • Alessio Malandruccolo
Chapter
Part of the Topics in Mining, Metallurgy and Materials Engineering book series (TMMME)

Abstract

The main coating systems used in aerospace gas turbine engines are presented. Coatings are fundamental to protect the surface of the structural components from several degradation factors, like oxidation, corrosion, wear, and erosion. The complexity of the environments and servicing conditions of gas turbine engines requires properties and materials performances that can be attained only through the deposition on structural components and hot parts of composite coating systems. Several of them involve metallic layers, although it is just thanks to a suitable combination of diverse materials, featuring altogether the full range of needed properties, that an effective part protection can be assured. Temperature, as usual, is paramount, since it determines the kinetics of all relevant transformations. Therefore, thermal barrier ceramic coatings are included in this chapter, since they are fundamental for lowering the temperature in the underlying metallic component. Still, the underlayer of a thermal barrier coating, the so-called bond coat, is metallic, and it is paramount as far as an adequate resistance to high-temperature corrosion phenomena is concerned. The main deposition techniques, whose selection is crucial for obtaining a good quality control and durability of the coating systems, are also introduced.

References

  1. Allam I M et al (1979) Influence of small Pt additions on Al2O3 Scale Adherence. Oxidation of Metals 14: 517CrossRefGoogle Scholar
  2. Allen P B et al (1999) Diffusion, Locons and Propagons; Character of atomic Vibrations in amorphous Si. Philosophical Magazine B 79 (11–12): 1715–1731CrossRefGoogle Scholar
  3. Alman et al (2013) Erosion-resistant Nanocoatings for improved Energy Efficiency in Gas Turbines. U.S. Department of EnergyGoogle Scholar
  4. Alperine S, Lelait L (1994) Microstructural Investigations of Plasma-sprayed Yttria partially stabilised Zirconia TBC. Transactions ASME: Journal of Engineering for Gas Turbines and Flows 116: 258–265Google Scholar
  5. Anderson P N, Sheffler K D (1983) Development of Strain Tolerant Thermal Barrier Coating Systems. Available via DIALOG. https://ntrs.nasa.gov/search.jsp?R=19840004244. Accessed 25 Jul 2017
  6. Berry D et al (1995) Enhancing Performance of Silicon-modified Slurry Aluminides on Turbine Components operating in Marine Environments. In: International Gas Turbine and Aeroengine Congress and Exposition, Huston, Texas, 5–8 June 1995Google Scholar
  7. Borawski B et al (2011) The Influence of ductile interlayer Material on the Particle Erosion Resistance of Multilayer TiN based Coatings. Wear 271 (11–12): 2890–2898CrossRefGoogle Scholar
  8. Borom M P et al (1996) Role of Environmental Deposits and operating Surface Temperature in Spallation of Air Plasma sprayed Thermal Barrier Coatings. Surface and Coatings Technology 86–87 Part 1: 116–126Google Scholar
  9. Bose S (2007) High Temperature Coatings. Butterworth HeinemannGoogle Scholar
  10. Brendel et al (2008) MTU Solutions against Erosive Attack and Loss of EGT Margin in Turbo Engines-ER coat. MTU Technical PublicationGoogle Scholar
  11. Bruce R W (1998) Development of 1232 °C (2250 F) Erosion and Impact Tests for Thermal Barrier Coatings. Tribology Transactions 41 (4): 399–410CrossRefGoogle Scholar
  12. Cao X Q et al. (2004) Ceramic Materials for Thermal Barrier Coatings. Journal of the European Ceramic Society 24 (1): 1–10CrossRefGoogle Scholar
  13. Chen M W et al (2003) Characterization and Modeling of a Martensitic Transformation in a Platinum modified Diffusion Aluminide bond Coat for Thermal Barrier Coatings. Acta Materialia 51 (14): 4279–4294CrossRefGoogle Scholar
  14. Chen X et al (2003) Foreign Object Damage in a Thermal Barrier System: Mechanisms and Simulations. Materials Science and Engineering A 352 (1–2): 221–231CrossRefGoogle Scholar
  15. Chen Y et al (2017) A Mechanistic Understanding on Rumpling of NiCoCrAlY bond Coat for Thermal Barrier Coating Applications. Acta Materialia 128: 31–42CrossRefGoogle Scholar
  16. Clarke D R (2003) Materials Selection Guidelines for low thermal Conductivity Thermal Barrier Coatings. Surface and Coatings Technology 163–164: 67–74CrossRefGoogle Scholar
  17. Clarke D R et al (2012) Thermal-barrier Coatings for more efficient Gas-turbine Engines. MRS Bulletin 37 (10):891–898CrossRefGoogle Scholar
  18. Cortez R et al (1999) Investigation of variable Amplitude Loading on Fretting Fatigue Behavior of Ti-6Al-4V. International Journal of Fatigue 21 (7): 709–717CrossRefGoogle Scholar
  19. Das D K (2013) Microstructure and High Temperature Oxidation Behavior of Pt-modified Aluminide bond Coats on Ni-base Superalloys. Progress in Materials Science 58 (2): 151–182CrossRefGoogle Scholar
  20. Davies H (1963) The Design and Development of the Thiocol XRL99 Rocket Engine for the X-15 Aircraft. Journal of the Royal Aeronautical Society 167: 79–91CrossRefGoogle Scholar
  21. Davis A W, Evans A G (2006) Effects of bond Coat Misfit Strains on the Rumpling of thermally grown Oxides. Metallurgical and Materials Transactions A 37 (7): 2085–2095CrossRefGoogle Scholar
  22. Deb P et al (1987) Surface Stability of Platinum Modified Aluminide Coatings during 1100 °C Cyclic Test. Journal of Vacuum Science and Technology A 5 (6): 3366–3372CrossRefGoogle Scholar
  23. Dobek L J (1973) Labyrynth Seal Testing for Lift Fan Engines. Available via DIALOG. https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19730007797.pdf. Accessed 4 September 2017
  24. Dorfman M R et al (2008) Recent Development of High Temperature Thermal Spray Abradable Coatings. Ceramics Japan, The Ceramic Society of Jaan 43 (5): 389–395Google Scholar
  25. Driver M (2012) Coatings for Biomedical Applications. Woodhead Publishing Ltd, Cambridge (UK)CrossRefGoogle Scholar
  26. Dryepondt S, Pint B A (2010) Determination of the Ductile to Brittle Temperature Transition of Aluminide Coatings and its Influence on the mechanical Behavior of coated Specimens. Surface Coatings and Technology 205: 1195–1199CrossRefGoogle Scholar
  27. Duvall D S (1981) Processing Technology for Advanced Metallic and Ceramic Turbine Airfoil Coatings. In: Proceedings of 2nd Conference of Advanced Materials for Alternative-Fuel-Capable Heat Engines, Electric Power Research Institute, 24–28 August 1981Google Scholar
  28. Evans et al (2008) The Influence of Oxides on the Performance of Advanced Gas Turbines. Journal of the European Ceramic Society 28 (7): 1405–1419CrossRefGoogle Scholar
  29. Fauchais P L et al (2014) Thermal spray Fundamentals: From Powder to Part. SrpingerGoogle Scholar
  30. Felten E J (1976) Use of Platinum and Rhodium to improve Oxide Adherence on Ni-8Cr-6Al Alloys. Oxidation of Metals 10 (1): 23–28CrossRefGoogle Scholar
  31. Felten E J, Pettit F S (1976) Development, Growth, and Adhesion of Al2O3 on Platinum-Aluminum Alloys. Oxidation of Metals 10 (3): 189–223CrossRefGoogle Scholar
  32. Firdaouss M et al (2017) Tungsten Coating by ATC Plasma Spraying on CFC for WEST Tokamak. Physica Scripta T170Google Scholar
  33. Fountain J G et al (1976) The Influence of Platinum on the Maintenance of α-Al2O3 as a protective Scale. Oxidation of Metals 10 (5): 341–345CrossRefGoogle Scholar
  34. Galmiche P M (1975) US Patent 3,900,613Google Scholar
  35. Garrett E G, Gyorgak C A (1953) Adhesive and Protective Characteristics of Ceramic Coating A-417 and its Effects on Engine Life of Forged Refractory-26 (AMS 5760) and Cast Stellite (AMS 5385) Turbine Blades. Available via DIALOG. https://ntrs.nasa.gov/search.jsp?R=19930082087. Accessed 20 July 2017
  36. Garvie R C et al (1972) Structure and Thermomechanical Properties of Partially Stabilized Zirconia in the CaO-ZrO2 System. Journal of the American Ceramic Society 55 (3) 152–157CrossRefGoogle Scholar
  37. Garvie R C et al (1975) Ceramic Steel? Nature 258: 703–704CrossRefGoogle Scholar
  38. Garvie RC, Goss M F (1986) Intrinsic Size Dependence of the Phase Transformation in Zirconia Microcrystals. Journal of Materials Science 21 (4): 1253–1257CrossRefGoogle Scholar
  39. Gauje G, Morbioli R (1983) Vapor Phase Aluminizing to Protect Turbine Airfoils. In: Singhal S C (ed) High Temperature Protective Coatings. The Metallurgical Society of AIME, Atlanta, GA, p 13–26Google Scholar
  40. Giggins C S, Pettit F S (1979) Hot Corrosion Degradation of Metals and Alloys – A Unified Theory. Pratt & WhitneyGoogle Scholar
  41. Goward G W (1998) Progress in Coatings for Gas Turbine Airfoils. Surface and Coatings Technology 108-109: 73–79CrossRefGoogle Scholar
  42. Green D J et al (1989) Transformation Toughening of Ceramics. CRC Press, Boca Raton, Florida, USAGoogle Scholar
  43. Guo H et al (2009) Thermo-physical and Thermal Cycling Properties of Plasma-sprayed BaLa2Ti3O10 Coating as Potential Thermal Barrier Materials. Surface and Coatings Technology 204 (5): 691–696CrossRefGoogle Scholar
  44. Gupta D K, Duvall D S (1984) A Silicon and Hafnium modified Plasma Sprayed MCrAlY Coating. In: Bricknell R H et al (eds) Superlloys. The Metallurgical Society of AIMR, Warrendale, PA, p 711–720Google Scholar
  45. Harrison W N (1947) Review of an Investigation of Ceramic Coatings for Metallic Turbine Parts and Other High Temperature Applications. Available via DIALOG. https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930087630.pdf. Accessed 20 July 2017
  46. Hazell B et al (2008) Development of improved bond Coat for enhanced Turbine Durability. Superalloys 2008: 753–760Google Scholar
  47. Heimann R B (2006) Plasma Spray Coating: Principles and Applications 2nd edn. Wiley VHCGoogle Scholar
  48. Helm D, Olaf Roder O (2007) Recent Titanium Research and Development in Germani. In: Ninomi M et al (ed) Ti-2007 Science and Technology. The Japan Institute of Metals, p 25–32Google Scholar
  49. Hermanek F J (2001) Thermal Spray Terminology and Origins. ASM International, Materials Park, OHGoogle Scholar
  50. Hjelm L N, Bornhorst B R (1961) Research-Airplane-Committee on Conference on the Progress of the X-15 Project. Available via DIALOG. https://ntrs.nasa.gov/search.jsp?R=19710070129. Accessed 20 July 2017
  51. Hocking M G et al (1989) Metallic and Ceramic Coatings. Longman Scientific & TechnicalGoogle Scholar
  52. Ibegazene H et al (1993) Microstructure of Yttria stabilized Zirconia-Hafnia Plasma sprayed Thermal Barrier Coatings. Journal De Phisique IV 3: 1013–1016Google Scholar
  53. Jackson R W et al (2014) Thermal Barrier Coatings Adherence to Hf-modified B2 NiAl bond Coatings. Acta Materialia 80: 39–47CrossRefGoogle Scholar
  54. Jackson R W et al (2015) Interaction of molten Silicates with Thermal Barrier Coatings under Temperature Gradients. Acta Materialia 89: 396–407CrossRefGoogle Scholar
  55. Jarligo M O et al (2010) Atmospheric Plasma Spraying of High Melting Temperature Complex Perovskites for TBC Application. Journal of Thermal Spray Technology 19 (1–2): 303–310CrossRefGoogle Scholar
  56. Jorgensen D J et al (2016) Bond Coatings with high Rumpling Resistance: Design and Characterization. Surface and Coating Technology 300: 25–34CrossRefGoogle Scholar
  57. Joseph A D (1960) US Patent 3,102,044Google Scholar
  58. Kablow E N, Muboyadzhyan S A (2017) Erosion-Resistant Coatings for Gas Turbine Engine Compressor Blades. Russian Metallurgy 2017 (6): 494–504CrossRefGoogle Scholar
  59. Kakuda T R et al (2015) The Thermal Behavior of CMAS-infiltrated Thermal Barrier Coatings. Surface and Coatings Technology 272: 350–356CrossRefGoogle Scholar
  60. Kermapur A et al (2015) Failure Analysis of Ti6Al4V Gas Turbine Compressor Blades. Engineering Failure Analysis 15 (8): 1052–1064CrossRefGoogle Scholar
  61. Khanna A S (2002) Introduction to High Temperature Oxidation. ASM InternationalGoogle Scholar
  62. Kingery W D (1955) Thermal Conductivity: Temperature Dependence of Conductivity for Single-phase Ceramics. Journal of the American Ceramic Society 38: 251–255CrossRefGoogle Scholar
  63. Krämer S et al (2008) Mechanism of Cracking and Delamination within Thermal Barrier Systems in Aeroengines subject to Calcium-Magnesium-Alumino-Silicate (CMAS) Penetration. Materials Science and Engineering A 490 (1–2): 26–35CrossRefGoogle Scholar
  64. Lammermann H, Kienel G (1991) PVD Coatings for Aircraft Turbine Blades. Advanced Materials and Processes 140 (6): 18–23Google Scholar
  65. Lattime S B, Steinetz B M (2004) Turbine Engine Clearance Control Systems: Current Practices and Future Directions. Journal of Propulsion and Power 20 (2): 302–311CrossRefGoogle Scholar
  66. Lee J W, Kuo Y C (2005) Cyclic Oxidation Behavior of a Cobalt Aluminide Coating on Co-base Superalloy AMS 5608. Surface and Coatings Technology 200 (5–6): 1225–1230CrossRefGoogle Scholar
  67. Lelait L et al (1993) Microstructural Investigations of EBPVD Thermal Barrier Coatings. Journal De Physique IV 3: 645–654Google Scholar
  68. Lesnikova E G, Lesnikov V P (1986) Influence of the β-Phase of the Aluminide Coating on the Condition and Scale Resitance of the Surface Layer of NBi-Al alloys. Metal Science and Heat Treatment 28 (5): 372–376CrossRefGoogle Scholar
  69. Levi C G et al (2012) Environmental Degradation of Thermal Barrier Coatings by molten Deposits. MRS Bulletin 37: 932–941CrossRefGoogle Scholar
  70. Lughi V, Clarke D R (2005) High Temperature Aging of YSZ Coatings and subsequent Transformation at low Temperature. Surface and Coatings Technology 200 (5–6): 1287–1291CrossRefGoogle Scholar
  71. Luthra K L, Leblanc O H (1987) Low Temperature Hot Corrosion of CoCrAl Alloys. Materials Science and Engineering 87: 329–335CrossRefGoogle Scholar
  72. Markou C et al (2011) IATA Maintenance Cost Executive Commentary. Available via DIALOG. https://www.iata.org/whatwedo/workgroups/Documents/MCTF/AMC-Exec-Comment-FY14.pdf. Accessed 12 November 2017
  73. Meelu M C et al (1992) Sermaloy J (Silicon modified Aluminide) Coating mechanical Improvements. Processing, Properties and Applications of Metallic and Ceramic Materials 2: 1247–1253Google Scholar
  74. Meier S M et al (1990) Status of Ceramic Thermal Barrier Coatings – Gas Turbine Applications and Life Prediction Methods. In: Proceedings of Coatings for Advanced Heat Engines Workshop, US Department of Energy, 6–9 August 1990Google Scholar
  75. Mercer C et al (2005) A Delamination Mechanism for Thermal Barrier Coatings subject to Calcium-Magnesium-Alumino-Silicate (CMAS) Infiltration. Acta Materialia 53 (4): 1029–1039CrossRefGoogle Scholar
  76. Mercer C et al (2007) On a ferroelastic Mechanism governing the Toughness of Metastable tetragonal-prime (t’) Yttria-stabilized Zirconia. Proceedings of the Royal Society A: Mathematica, Physical and Engineering Sciences 463 (2081): 1393–1408CrossRefGoogle Scholar
  77. Mévrel R (1989) State of Art on High Temperature Corrosion resistant Coatings. Materials Science and Engineering A 120–121 Part 1: 13–24Google Scholar
  78. Mévrel R et al (1986) Pack Cementation Process. Materials Science and Technology 2: 201–206CrossRefGoogle Scholar
  79. Miller R A et al. Phase Stability in Plasma-sprayed partially stabilised Zirconia-Yttria. In: Heuer A H, Hobbs L W, editors. Advances in Ceramics Volume 3 – Science and Technology of Zirconia. The American Ceramic Society, Columbus, Ohio; 1981. p. 241–253Google Scholar
  80. Muboyadzhyan S A (2009) Erosion Resistant Coatings for Gas Turbine Compressor Blades. Russian Metallurgy 2009 (3): 183–186CrossRefGoogle Scholar
  81. Mumm D R et al (2001) Characterization of a Cyclic Displacement Instability for a thermally grown Oxide in a Thermal Barrier System. Acta Materialia 49 (12): 2329–2340CrossRefGoogle Scholar
  82. Naji A et al (2015) Improvements in the Thermodynamic and Kinetic Considerations on the Coating Design for Diffusion Coatings formed via Pack Cementation. Materials and Corrosion 66 (9): 863–868CrossRefGoogle Scholar
  83. Nicholls et al (1999) A Comparison between the Erosion Behavior of Thermal Spray and Electron-beam Physical Vapour Deposition Thermal Barrier Coatings. Wear 233: 352–361CrossRefGoogle Scholar
  84. Nicholls J R (2000) Designing Oxidation-resistant Coatings. JOM 52 (1): 28–35CrossRefGoogle Scholar
  85. Nicholls J R (2003) Advances in Coating Design for High-Performance Gas Turbines. MRS Bulletin 28 (9): 659–670CrossRefGoogle Scholar
  86. Nicholls J R et al (2002) Smart Overlay Coatings – Concept and Practice. Surface and Coatings Technology 149: 236–244CrossRefGoogle Scholar
  87. Nicoll A R et al (1986) Future Developments in Plasma Spray Coating. Materials Science and Technology 2 (3): 214–219CrossRefGoogle Scholar
  88. Oerlikon Metco (2014) Solutions Flash: Improve Efficiency and Reduce Emissions with High Pressure Turbine Abradable Coatings for Industrial Gas Turbines. Available via DIALOG. https://www.oerlikon.com/ecomaXL/files/metco/oerlikon_SF-0015.1_IGT_HPT_Abradables_EN.pdf&download=1. Accessed 12 November 2017
  89. Oerlikon Metco (2016) Material Product Data Sheet – Copper Nickel and Copper Nickel Indium Thermal Spray Powders. Available via DIALOG. https://www.oerlikon.com/ecomaXL/files/metco/oerlikon_DSMTS-0061.5_CuNi_CuNiIn_Powders.pdf&download=1. Accessed 12 November 2017
  90. Padture N P et al (2002) Thermal Barrier Coatings or Gas-Turbine Engine Applications. Science 296: 280–284CrossRefGoogle Scholar
  91. Pan W et al (2012) Low Thermal Conductivity Oxides. MRS Bulletin 37: 917–922CrossRefGoogle Scholar
  92. Park Y W et al (2006) Effect of Fretting Amplitude and Frequency on the Fretting Corrosion Behavior of Tin plated Contacts. Surface and Coatings Technology 201: 2181–2192CrossRefGoogle Scholar
  93. Parzukowski R S (1977) Gas-Phase Deposition of Aluminum on Nickel Alloys. Thin Solid Films 45: 349–355CrossRefGoogle Scholar
  94. Pérez F J et al (1999a) Aluminizing and chromizing Bed Treatment by CVD in a fluidized Bed Reactor on Austenitic Stainless Steels. Surface and Coatings Technology 120–121: 151–157CrossRefGoogle Scholar
  95. Pérez F J et al (1999b) Kinetic Studies of Cr and Al Deposition using CVD-FBR on different metallic Substrates. Surface and Coatings Technology 122: 281–289CrossRefGoogle Scholar
  96. Pint B A (1997) Study of the Reactive Element Effect in ODS Iron-Base Alumina Formers. Materials Science Forum 251–254: 397–404CrossRefGoogle Scholar
  97. Pint B A (2004) The Role of Chemical Composition on the Oxidation Performance of Aluminide Coatings. Surface and Coatings Technology 188–189: 71–78CrossRefGoogle Scholar
  98. Pint B A et al (1998) Substrate and Bond Coat Compositions: Factors affecting Alumina Scale Adhesion. Materials Science and Engineering A 245 (2): 201–211CrossRefGoogle Scholar
  99. Pint B A et al (2001) Evaluation of Iron-Aluminide CVD Coatings for High Temperature Corrosion Protection. Materials at High Temperatures 18 (3): 185–192CrossRefGoogle Scholar
  100. Pint B A et al (2006) Oxidation Resistance: One Barrier to moving beyond Ni-base Superalloys. Materials Science and Engineering A 415 (1–2):255–263CrossRefGoogle Scholar
  101. Pint B A et al (2011) Effect of increased Water Vapor Levels on TBC Lifetime with Pt-containing bond Coatings. Surface and Coatings Technology 206: 1566–1570CrossRefGoogle Scholar
  102. Pint B A, Zhang Y (2011) Performance of Al-rich Oxidation-resistant Coatings for Fe-base Alloys. Materials and Corrosion 62 (6): 549–560CrossRefGoogle Scholar
  103. Poerschke D L et al (2016) Equilibrium Relationships between Thermal Barrier Oxides and Silicate Melts. Acta Materialia 120: 302–314CrossRefGoogle Scholar
  104. Pokluda J, Kianicová M (2010) Damage and Performance Assessment of Protective Coatings on Turbine Blades. Available via DIALOG. https://www.intechopen.com/download/pdf/12092. Accessed 28 October 2017
  105. Prater J T et al (1981) Proceedings of the second Conference on Advanced Materials for alternate Fuels capable Heat Engines. Palo Alto, CA 1981Google Scholar
  106. Praxair Surface Technologies (2000) Praxair and TAFA Arc Spray Copper-Nickel-Indium Wire-58T. Available via DIALOG. http://tatiscia.com/wp-content/pdf/tafa/1.9.1.2-58T%20-%20Copper%20Nickel%20Indium%20Wire.pdf. Accessed 13 November 2017
  107. Priest M S, Zhang Y (2015) Synthesis of Clean Aluminide Coatings on Ni-based Superalloys via modified Pack Cementation Process. Materials and Corrosion 66 (10): 1111–1119CrossRefGoogle Scholar
  108. Qu Z et al (2011) Thermal Conductivity of the Gadolinium Calcium Silicate Apatites: Effect of Different Point Defect Types. Acta Materialia 59 (10): 3941–3850CrossRefGoogle Scholar
  109. Raghavan S et al (2001) Thermal Properties of Zirconia co-doped with trivalent and pentavalent Oxides. Acta Materialia 49 (1): 169–179CrossRefGoogle Scholar
  110. Raghavan S et al (2004) Ta2O5/Nb2O5 and Y2O3 Co-doped Zirconias for Thermal Barrier Coatings. Journal of the American Ceramic Society 87 (3): 431–437CrossRefGoogle Scholar
  111. Rajendran R (2012) Gas Turbine Coatings – An Overview. Engineering Failure Analysis 26: 355–369CrossRefGoogle Scholar
  112. Reed R C (2006) The Superalloys – Fundamentals and Applications. Cambridge University Press, Cambridge (UK)CrossRefGoogle Scholar
  113. Ren W et al (2014) Oxidation and Microstructure Evolution of Cobalt Aluminide Coatings on directionally-solidified Superalloys during long term Exposure at 1000 °C. Materials Research Innovations 18 (S4):945–951Google Scholar
  114. Restall J E, Wood M I (1986) Alternative Processes and Treatments. Materials Science and Technology 2: 225–231CrossRefGoogle Scholar
  115. Rigney D V et al (1997) PVD Thermal Barrier Coating Applications and Process Development for Aircraft Engines. Journal of Thermal Spray Technology 6 (2): 167–175CrossRefGoogle Scholar
  116. Rolls-Royce (1996) The Jet Engine 5th edition. Rolls-Royce plc, DerbyGoogle Scholar
  117. Ruud J A et al (2001) Strength Degradation and Failure Mechanisms of Electron-beam Physical-vapor-deposited Thermal Barrier Coatings. Journal of the American Ceramic Society 84 (7): 1545–1552CrossRefGoogle Scholar
  118. Sato T et al (1985) Transformation of Yttria partially stabilized Zirconia by low Temperature Annealing in Air. Journal of Materials Science 20 (4): 1466–1470CrossRefGoogle Scholar
  119. Scharrer and Pelletti (1995) Leakage and Rotordynamic Effects of Compressor annular Seals. In: Proceedings of 24th Turbomachinery Symposium, Huston, Texas, 26–28 September 1995, p 175Google Scholar
  120. Schmid R (1997) New High Temperature Abradable Coatings for Gas Turbines. PhD Thesis, Swiss Federal Institute of TechnologyGoogle Scholar
  121. Scott H G (1975) Phase Relationship in the Zirconia-Yttria System. Journal of Materials Science 10 (9): 1527–1535CrossRefGoogle Scholar
  122. Seelig R P, Steuber R J (1978) High-Temperture-resistant Coatings for Superalloys. High Temperatures – High Pressures 10 (2): 207–213Google Scholar
  123. Shankar S, Seigle L L (1978) Interdiffusion and intrinsic Diffusion in the NiAl (δ) Phase of the Al-Ni System. Metallurgical Transactions A 9 (10): 1467–1476CrossRefGoogle Scholar
  124. Shen et al (2008) Anisotropic thermal Conductivity of the Aurivillus Phase, Bismuth Titanate (Bi4Ti3O12): A natural nanostructured Superlattice. Applied Physics Letters 93 (10) 102907CrossRefGoogle Scholar
  125. Shen Y et al (2010) Low thermal Conductivity without Oxygen Vacancies in equimolar YO1.5+TaO2.5- and YbO1.5+TaO2.5- stabilized Zirconia Ceramics. Acta Materialia 58 (13): 4424–4431CrossRefGoogle Scholar
  126. Smialek J L (1971) Marteniste in NiAl Oxidation Resistant Coatings. Metallurgical Transactions 2 (3): 913–915CrossRefGoogle Scholar
  127. Smith A B et al (1999) Vapour Aluminide Coating of Internal Cooling Channels in Turbine Blades and Vanes. Surface Coatings Technology 120–121: 112–117CrossRefGoogle Scholar
  128. Smith J S, Boone D H (1990) Platinum Modified Aluminides-Present Status. In: Gas Turbine and Aeroengine Congress and Exposition, Brussels, Belgium, 1980Google Scholar
  129. Song X W et al (2011) Influence of the partial Substitution of Y2O3 with Ln2O3 (Ln=Nd, Sm, Gd) on the Phase Structure and thermophysical Properties of ZrO2-Nb2O3-Y2O3 Ceramics. Acta Materialia 59 (10): 3895–3902CrossRefGoogle Scholar
  130. Sparks T D et al (2010) Anisotropic Thermal Diffusivity and Conductivity of La-doped Strontium Niobate Sr2Nb2O7. Journal of the American Ceramic Society 93 (4): 1136–1141CrossRefGoogle Scholar
  131. Sporer D R et al (2011) US Patent 7981530 B2Google Scholar
  132. Squillace A et al (1999) The Control of the Composition and Structure of Aluminide Layers formed by Vapour Aluminising. Surface and Coatings Technology 120–121: 118–123CrossRefGoogle Scholar
  133. Stecura S (1986) Advanced Thermal Barrier System bond Coatings for Use on Nickel-, Cobalt- and Iron-base Alloy Substrate. Thin Solid Films 136 (2): 241–256CrossRefGoogle Scholar
  134. Strangman T E (1987) Development and Performance of Physical Vapor Deposition Thermal Barrier Coating Systems. In: Proceedings of Coatings for Advanced Heat Engines Workshop, US Department of Energy, 27–30 July 1987Google Scholar
  135. Strangman T E (1996) US Patent 5,514,482Google Scholar
  136. Talboom F P, Grafwallner J (1970) US Patent 3,542,5330Google Scholar
  137. Tawancy H M et al (1991) Role of Platinum in Aluminide Coatings. Surface and Coatings Technology 49 (1-3):1–7CrossRefGoogle Scholar
  138. Thorpe M L, Richter J (1992) A pragmatic Analysis and Comparison of HVOF Processes. Journal of Thermal Spray Technology 1 (2): 161–170CrossRefGoogle Scholar
  139. Tolpygo V K et al (2008) Effect of Hf, Y and C in the underlying Superalloy on the Rumpling of diffusion Aluminide Coatings. Acta Materialia 56 (3): 489–499CrossRefGoogle Scholar
  140. Tolpygo V K, Clarke D R (2004a) On the Rumpling Mechanism in Nickel-Aluminide Coatings: Part I: An experimental Assesment. Acta Materialia 52 (17): 5115–5127Google Scholar
  141. Tolpygo V K, Clarke D R (2004b) On the Rumpling Mechanism in Nickel-Aluminide Coatings: Part II: Characterization of Surface Undulations and bond Coat Swelling. Acta Materialia 52 (17): 5129–5141Google Scholar
  142. Tu J et al (1994) The Size Effect of the martensitic Transformation in ZrO2-containing Ceramics. Journal of Materials Science 29 (6): 1662–1665CrossRefGoogle Scholar
  143. Tyron B et al (2006) Multilayered Ruthenium-modified bond Coats for Thermal Barrier Coatings. Metallurgical and Materials Transactions A 37 (11): 3347–3358CrossRefGoogle Scholar
  144. Tyron B et al (2007) Hybrid Intermetallic Ru/Pt modified bond Coatings for Thermal Barrier Systems. Surface and Coatings Technology 2020 (2): 349–361CrossRefGoogle Scholar
  145. Unocic K A, Pint B A (2013) Effect of Water Vapor on thermally grown Alumina Scales on bond Coating. Surface and Coatings Technology 215: 30–38CrossRefGoogle Scholar
  146. Van Ness D et al (2006) Turbine Tip Clearance Flow Control Using Plasma Actuators. Paper presented at the 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, 9–12 January 2006Google Scholar
  147. Van Roode M, Hsu L (1989) Evaluation of the Hot Corrosion Protection of Coatings for Turbine hot Section Components. Surface and Coatings Technology 37 (4): 461–481CrossRefGoogle Scholar
  148. Vassen R et al (2000) Zirconates as New Materials for Thermal Barrier Coatings. Journal of the American Ceramic Society 83 (8): 2023–2028CrossRefGoogle Scholar
  149. Vassen R et al (2010) Overview on advanced thermal Barrier Coatings. Surface and Coatings Technology 205 (4): 938–942CrossRefGoogle Scholar
  150. Vassen R, Stöver D (2007) Influence of Microstructure on the Thermal Cycling Performance of Thermal Barrier Coatings. In: Marple B R et al (ed) Thermal Spray 2007: Global Coating Solutions: Proceedings of the 2007 International Thermal Spray Conference. ASM International, Materials Park, Ohio, 2007Google Scholar
  151. Wang et al (2011) Diffusion Barrier behaviors of (Ru, Ni)Al/NiAl Coatings on Ni-based Superalloy Substrate. Intermetallics 19 (2): 191–195CrossRefGoogle Scholar
  152. Warnes B M, Punola D C (1997) Clean Diffusion Coatings by Chemical Vapor Deposition. Surface and Coatings Technology 94–95: 1–6CrossRefGoogle Scholar
  153. Wilden J et al (2006) Plasma transferred Arc Welding – Modeling and experimental Optimization. Journal of Spray Technology 15 (4): 779–784CrossRefGoogle Scholar
  154. Wilson S (2012) Thermally sprayed abradable Coating Technology for Sealing in Gas Turbines. Oerlikon Metco White Paper – Thermally Sprayed Abradable Coatins 10: 1–9Google Scholar
  155. Winter M R, Clarke D R (2007) Oxide Materials with Low Thermal Conductivity. Journal of the American Ceramic Society 90 (2): 533–540CrossRefGoogle Scholar
  156. Wolfe D E et al (2005) Tailored Microstructure of EB-PVD 8YSZ Thermal Barrier Coatings with low thermal Conductivity and high thermal Reflectivity for Turbine Applications. Surface and Coatings Technology 190: 132–149CrossRefGoogle Scholar
  157. Wright I G, Gibbons T B (2007) Recent Developments in Gas Turbine Materials and Technology and their Implications for Syngas Firing. International Journal of Hydrogen Energy 32 (16): 3610–3621CrossRefGoogle Scholar
  158. Wu L T et al (2017) A prominent Driving Force for the Spallation of Thermal Barrier Coatings: Chemistry dependent Phase Transformation of the bond Coat. Acta Materialia 137: 22–35CrossRefGoogle Scholar
  159. Wuench B J, Eberman K W (2000) Order-Disorder Phenomena in A2B2O7 Pyrochlore Oxides. JOM 52 (7): 19–21CrossRefGoogle Scholar
  160. Xu T et al (2004) Observations and Analyses of Failure Mechanisms in Thermal Barrier Systems with two Phase bond Coats based on NiCoCrAlY. Acta Materialia 52 (6): 1439–1450CrossRefGoogle Scholar
  161. Yang S et al (2008) Anisotropic Thermal Conductivity of the Aurivillus Phase, Bismuth Titanate (Bi4Ti3O12): A Natural Nanostructured Superlattice. Applied Physics Letters 93 (10): 102907–102907-3CrossRefGoogle Scholar
  162. Zhang Y et al (2003) Martensitic Transformation in CVD NiAl and (Ni, Pt)Al bond Coatings. Surface and Coatings Technology 163–164: 19–24CrossRefGoogle Scholar
  163. Zhang Y et al (2004) Effect of Cycle Length on the Oxidation Performance of Iron Aluminide Coatings. Surface and Coatings Technology 188–189: 35–40CrossRefGoogle Scholar
  164. Zhang Y et al (2007) Interdiffusional Degradation of Oxidation-resistant Aluminide Coatings on Fe-base alloys. Materials and Corrosion 58 (10): 751–761CrossRefGoogle Scholar
  165. Zhao M et al (2012) Properties of Yttria-Stabilized-Zirconia Based Ceramic Composite Abradable Coatings. Key Engineering Materials 512–515: 1551–1554CrossRefGoogle Scholar
  166. Zhou Z R (1999) Lubrication in Fretting – A Review. Wear 225–229: 962–967CrossRefGoogle Scholar
  167. Zhu D M, Miller R A (2004) Development of Advanced Low Conductivity Thermal Barrier Coatings. International Journal of Applied Ceramic Technology 1 (1): 86–94CrossRefGoogle Scholar

Further Reading

  1. Davis J R (2004) Handbook of Thermal Spray Technology. ASM InternationalGoogle Scholar
  2. Dorfman M R et al (2013), Thermal Spray Technology Growth in Gas Turbine Applications. In: Tucker R C (ed) Thermal Spray Technology vol. 5A, ASM International, pp 280–286Google Scholar
  3. Xu H and Guo H (2011) Thermal Barrier Coatings. Woodhead publishingGoogle Scholar
  4. Kanna A S (2016) High Temperature Corrosion. World ScientificGoogle Scholar
  5. Tamarin Y (2002) Protective Coatings for Turbine Blades. ASM InternationalGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Stefano Gialanella
    • 1
  • Alessio Malandruccolo
    • 2
  1. 1.Industrial Engineering DepartmentUniversity of TrentoTrentoItaly
  2. 2.Metallurgy Industrial ConsultantBolzanoItaly

Personalised recommendations