Advertisement

Multi-node MIL-STD-1553 Avionics Bus-Monitor Development Under Linux Platform

  • Rajesh S. KarvandeEmail author
  • L. Sobhan Kumar
  • Maharshi Raman
Conference paper
Part of the Learning and Analytics in Intelligent Systems book series (LAIS, volume 3)

Abstract

MIL-STD-1553 communication protocol is popular and extensively used in avionics applications. In 1553 protocol, Bus Controller (BC) schedules data in terms of messages to Remote terminals (RT) on the communication bus (Node). Numbers of Electronic avionics systems are connected on 1553 for the data exchange with Bus Controller. Data messages i.e. traffic on the bus is monitored by Bus Monitor (BM) which display and store data for analysis. This scenario is simple for single node as only one BC is available. In the case of complex scenario where numbers of communication channels i.e. nodes are more than one, data exchange take place simultaneously and monitoring terminals (Bus Monitors) are equals to nodes for communication. Avionics system consists of ‘n’ independent nodes with n Bus Monitors that are connected separately and that are running independently. There is no sync between these nodes and Bus Monitor to start data capture as well as time reference of events. This problem is resolved by development of single Bus Monitor for all nodes of avionics systems connected. In this paper we are presenting the system development of Bus Monitor which captures the data from n nodes of 1553 communication with time synchronization on single computer. As only one computer and Multi node 1553 card is involved, this technology enhances the data analysis capability and also cost effective for the avionics applications, mainly in the field of Hardware In Loop Simulation (HILS) that is used for validation of avionic system’s software in real time using multi node environment

Keywords

Hardware In Loop Simulation MIL-STD-1553 Bus Monitor On board computer Real Time Linux Bus Controller Remote Terminal 

References

  1. 1.
    Karvande RS, Ramesh Kumar B (2013) Development of HILS test-bed to test newly developed INS system. In: Proceedings of IEEE conference, ICMIRA. pp 536–539Google Scholar
  2. 2.
    Hoseinian MS, Bolorizadeh MA (2019) Design and simulation of a highly sensitive SPR optical fiber sensor. Photonic Sens 9:33CrossRefGoogle Scholar
  3. 3.
    Yang J, Konno A, Abiko S, Uchiyama M (2018) Hardware-in-the-loop simulation of massive-payload manipulation on orbit. ROBOMECH J 5:19CrossRefGoogle Scholar
  4. 4.
    Vo-Duy T, Ta MC (2016) A signal hardware-in-the-loop model for electric vehicles. ROBOMECH J 3:29CrossRefGoogle Scholar
  5. 5.
    Amini-Nezhad M, Guerrero-Zapata M, Bellata B, Cerda-Alabern L (2014) Simulation of multi-radio multi-channel 802.11 – based mess network in Ns-3Google Scholar
  6. 6.
    Karvande R (2014) cPCI based hardware-in-loop simulation system development under real time operating system. In: ICACCI-2014, pp 736–739Google Scholar
  7. 7.
    Prasad R, Shanmukh G, Karvande R (2014) Analysis of various RF-interference effects in GPS L1 C/A code receiver in tracking mode. In: IEEE conference, pp 1–6Google Scholar
  8. 8.
    DDC (2003) MIL-STD 1553 designers guide, 6th edn.Google Scholar
  9. 9.
    Lina C, Qiang Z (2012) The design and implementation of real-time HILS based on RTX platform. In: Industrial informatics (INDIN), 10th IEEE conferenceGoogle Scholar
  10. 10.
    Zhang X, Li H, Wang Q (2012) Researches on 1553 based semi-product simulation technology. In: IEEE conference, ICCSEGoogle Scholar
  11. 11.
    Alta delta technology (2007) MIL-STD 1553B tutorial, Rev. A, September 2007Google Scholar
  12. 12.
    Data Device Corporation (2009) BusTrACErTM MIL-STD Graphical Analyser software’s manual, Rev E- 5/11, MN-69066S0-001Google Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Rajesh S. Karvande
    • 1
    Email author
  • L. Sobhan Kumar
    • 1
  • Maharshi Raman
    • 1
  1. 1.Research Centre Imarat (RCI), DRDOVigyanakancha PO, HyderabadIndia

Personalised recommendations