Advertisement

Cutting Stone Building Materials and Ceramic Tiles with Diamond Disc

  • Ala Bezpalova
  • Vladimir Lebedev
  • Vladimir TonkonogyiEmail author
  • Yuri Morozov
  • Olga Frolenkova
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

During the repair and restoration of buildings, ceramic tiles and blocks of Al2O3 and ZrO2 are often cut. At present diamond abrasive discs are widely used for these purposes. The cutting process is accompanied by a considerable heat release and heating of the diamond disc. At a temperature of about 600°, the tensile strength of a disc is reduced by a factor of 2 and graphitization of diamond grains occurs. Thus, when cutting stone and building materials with a diamond disc, the disc heating temperature should not exceed 600 °C. In the work, mathematical modeling of the diamond cutting disc heating on a metal base was performed while cutting ceramic materials to determine the time of continuous operation to a critical temperature of 600 °C. The simulation results obtained showed the dependence of the heating temperature of the disc on the diameter of the latter, the speed of rotation, the minute feed, the grain size and the thickness of the disc. It is shown that by selecting appropriate process characteristics the time of continuous operation can be of the order of 10–12 min without the use of forced cooling.

Keywords

Diamond cutting disc Disc temperature Ceramics ZrO2 

References

  1. 1.
    Alexandrov, V.A.: Processing of Natural Stone with Diamond Disc Tools. Naukova Dumka, Kiev (1979)Google Scholar
  2. 2.
    Gorelov, V.A., Alekseev, S.V.: Features of machining of parts from ceramic materials. Izvest. MSTU MAMI 2(14), 64–67 (2012)Google Scholar
  3. 3.
    Guo, D.: Advances in Abrasive Technology. IX. Trans Tech Publication. Ueticon-Zuerich (2006)Google Scholar
  4. 4.
    Kastamonu, I.S., Firat, C.H.: The hot metal cuttings are cut. Sci. Sinter. 47(2), 131–143 (2015)CrossRefGoogle Scholar
  5. 5.
    Linh, V.T., Yong, Z.: Calculation of the circular saw blade. In: MATEC Web of Conferences. 51(2016)CrossRefGoogle Scholar
  6. 6.
    Turchetta, S.: Cutting force in stone machining by diamond disk. Adv. Mater. Sci. Eng. (2010)Google Scholar
  7. 7.
    Sun, Q., Zhang, J., Hu, J.: FAHP and TOPSIS Preg. Math. Probl. Eng. (2017)Google Scholar
  8. 8.
    Turchetta, S., Polini, W., Buyuksagis I.S.: Investigation on stone machining performance using force and specific energy. Adv. Mech. Eng. 1 (2009)CrossRefGoogle Scholar
  9. 9.
    Antoljak, D., Kuhinek, D., Korman, T., Kujundiic, T.: Dependency of specific energy of rock cutting on specific drilling energy. Min.-Geol.-Petrol. Eng. Bull. Zagreb (2018)Google Scholar
  10. 10.
    Ugur, S.: Torque-controlled adaptive speed control on a CNC. Adv. Mech. Eng. 7(2) (2015)Google Scholar
  11. 11.
    Polini, W., Turchetta, S. Diamond cutting mill wearing area. Adv. Mech. Eng. (2009)Google Scholar
  12. 12.
    Chumachenko, T.V., Lebedev, V.G., Marchuk, S.V.: Cooling with air and droplet jet when grinding ceramic coatings. Naukov notaki. Scientific collection of LNTU 41 (2013)Google Scholar
  13. 13.
    Bespalova, A.V., Lebedev, V.G., Frolenkova, O.V., Chumachenko, T.V.: Cutting stone building materials and ceramic tiles during construction work with diamond discs. Visoki technology in machinebudding, National Technical University “Kharkov Polytechnic Institute” (2018)Google Scholar
  14. 14.
    Brychkov, YuA, Prudnikov, A.P.: Integral transforms of generalized functions. Science, Moscow (1977)zbMATHGoogle Scholar
  15. 15.
    Popov, G.Y.: The concentration of elastic stresses near the dies, cuts, thin inclusions and reinforcements. Science, Moscow (1982)Google Scholar
  16. 16.
    Gradstein, I.T., Ryzhik, I.M.: Tables of Integrals, Sums, Series and Products. Fizmatgiz, Moscow (1962)Google Scholar
  17. 17.
    Lebedev, V.G., Klimenko, N.N., Uryadnikova, I.V., Chumachenko, T.V., Ovcharenko, A.V.: The definition of amount of heat released during metal cutting by abrasive grain and the contact temperature of the ground surface. Eastern–European J. Enterp. Technol. 5/7(83), 43–50 (2016)Google Scholar
  18. 18.
    Antoljak, D., Kujundžić, T., Korman, T., Kuhinek, D.: Rud. geol.-naftni Zb. 33(3), 23–32 (2018)CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  1. 1.Odessa State Academy of Civil Engineering and ArchitectureOdessaUkraine
  2. 2.Odessa National Polytechnic UniversityOdessaUkraine

Personalised recommendations