Advertisement

Generation of Enveloping Surfaces: Special Cases

  • Stephen P. RadzevichEmail author
Chapter

Abstract

In this chapter of the book, special cases of generation of enveloping surfaces is disclosed. For this purpose, a concept of reversibly-enveloping surfaces is introduced. For generation of reversibly-enveloping surfaces a novel method is proposed. This method is illustrated by an example of generation of reversibly-enveloping surfaces in case tooth flanks for geometrically accurate (ideal or perfect) crossed-axis gear pairs. The performed analysis makes it possible a conclusion that two Olivier principles of generation of enveloping surfaces: (a) in general case are not valid, and (b) in a degenerate case these two principles are useless. Ultimately, there is no sense to apply Olivier principles for the purpose of generation of reversibly-enveloping smooth regular part surfaces. Part surfaces those allow for sliding over themselves are considered as a particular degenerated case of enveloping surfaces.

References

  1. 1.
    Radzevich, S. P. (1991). Differential-geometrical method of surface generation (Doctoral thesis) (300p). Tula: Tula Polytechnic Institute.Google Scholar
  2. 2.
    Radzevich, S. P. (2001). Fundamentals of surface generation, monograph (592p). Kiev, Rastan.Google Scholar
  3. 3.
    Radzevich, S. P. (1991). Sculptured surface machining on multi-axis NC machine (192p). Monograph, Kiev, Vishcha Schola.Google Scholar
  4. 4.
    Radzevich, S. P., & Petrenko, T. Yu. (1999). Part and tool surfaces that allow sliding over themselves. Mechanika ta Mashinobuduvann’a (Vol. 1, pp. 231–240). Kharkiv, Ukraine.Google Scholar
  5. 5.
    Radzevich, S. P. (2012). Theory of gearing: Kinematics, geometry, and synthesis (856p). Boca Raton, FL.Google Scholar
  6. 6.
    Radzevich, S. P. (2018). Theory of gearing: Kinematics, geometry, and synthesis (2nd ed., 898p). Boca Raton, FL.Google Scholar
  7. 7.
    Olivier, T. (1842). Théorie Géométrique des Engrenages destinés (118p). Paris: Bachelier.Google Scholar
  8. 8.
    Radzevich, S. P. (2018). Three fundamental laws of gearing: For gear design and gear production. In Proceedings of the VIII International ConferenceComplex Assurance of Quality of Technological Processes & Systems” (Vol. 1, pp. 21–23). Chernihiv, Ukraine, May 10–12, 2018.Google Scholar
  9. 9.
    Radzevich, S. P. (2008). Kinematic geometry of surface machining (536p). Boca Raton FL: CRC Press.Google Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  1. 1.Southfield Innovation CenterEaton CorporationSouthfieldUSA

Personalised recommendations