Advertisement

Determination of Settling Efficiency of Solid Finely Dispersed Particles Within Devices with Rectangular Separators

  • I. N. Madyshev
  • O. S. Dmitrieva
  • A. V. DmitrievEmail author
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Design of dust-collecting device, characterized by low hydraulic resistance and high efficiency of collecting the fine particles, has been developed. It has a simple construction. It lacks small parts and small channels, which increases the reliability of its operation. It can be disassembled and restored. Separators are using for solid particles and droplets capturing from gas flow by means of gravity, inertia of centrifugal force. They can be used in industrial vacuum cleaners and can allow increasing the cleaning efficiency. The influence of design and technological parameters on collecting efficiency has been researched. The availability of several rows of separators leads to an increase in the settling efficiency of solid dispersed particles due to a more ordered structure of the gas flow. The studies of the influence of the geometrical constant of the proposed device on the settling efficiency show that in order to collect the relatively large particles, the dimensions of settling elements should be increased up to 50 mm.

Keywords

Separator Sedimentation of particles Gas cleaning 

Notes

Acknowledgements

The research was conducted with funding from the RF President’s grant project No. MK-417.2019.8.

References

  1. 1.
    Kudrov AI, Kuz’min AV, Rakov YY (2017) Effective fuel temperature of WWER-1000. MATEC Web Conf 141:01030.  https://doi.org/10.1051/matecconf/201711001046CrossRefGoogle Scholar
  2. 2.
    Abramovskikh AA, Ulyanova UA, Lavrinenko SV, Matveeva AA, Malishev D (2017) Modernisation of boiler unit automation system at acting power station. MATEC Web Conf 91:01002.  https://doi.org/10.1051/matecconf/20179101002CrossRefGoogle Scholar
  3. 3.
    Samokhvalov NM, Vinogradov VV (2014) Stationary and efficiency of cleaning dust from gases from on slotted filter. Theor Found Chem Eng 48:837–841.  https://doi.org/10.1134/S0040579514060086CrossRefGoogle Scholar
  4. 4.
    Ribeiro Rui PPL, Esteves Isabel AAC, Mota José PB (2017) Two-column relay simulated moving-bed process for gas-phase separations. Sep Purif Technol 182:19–28CrossRefGoogle Scholar
  5. 5.
    Song J, Hu X (2017) A mathematical model to calculate the separation efficiency of streamlined plate gas-liquid separator. Sep Purif Technol 178:242–252CrossRefGoogle Scholar
  6. 6.
    Zaripov SK, Soloveva OV, Skvortsov EV (2015) Analytical model of the transport of aerosol particles in a circular hole inside a porous medium. Transp Porous Media 107:141–151.  https://doi.org/10.1007/s11242-014-0429-xCrossRefGoogle Scholar
  7. 7.
    Zhao B, Su Y (2018) Particle size cut performance of aerodynamic cyclone separators: Generalized modeling and characterization by correlating global cyclone dimensions. J Aerosol Sc. 120:1–11CrossRefGoogle Scholar
  8. 8.
    Lin JC-T, Hsiao T-C, Hsiau S-S, Chen D-R, Chen Y-K, Huang S-H, Chen C-C, Chang M-B (2018) Effects of temperature, dust concentration, and filtration superficial velocity on the loading behavior and dust cakes of ceramic candle filters during hot gas filtration. Sep Purif Technol 198:146–154.  https://doi.org/10.1016/j.seppur.2017.06.014CrossRefGoogle Scholar
  9. 9.
    Benassi L, Dalipi R, Consigli V, Pasquali M, Borgese L, Depero LE, Clegg F, Bingham PA, Bontempi E (2017) Integrated management of ash from industrial and domestic combustion: a new sustainable approach for reducing greenhouse gas emissions from energy conversion. Environ Sci Pollut Res 24:14834–14846.  https://doi.org/10.1007/s11356-017-9037-yCrossRefGoogle Scholar
  10. 10.
    Elsayed K (2015) Optimization of the cyclone separator geometry for minimum pressure drop using Co-Kriging. Powder Technol 269:409–424CrossRefGoogle Scholar
  11. 11.
    Patra G, Chakraborty S, Meikap BC (2018) Role of vortex finder depth on pressure drop and performance efficiency in a ribbed hydrocyclone. S Afr J Chem Eng 25:103–109.  https://doi.org/10.1016/j.sajce.2018.04.001CrossRefGoogle Scholar
  12. 12.
    Sheng Y, Fang L, Sun Y (2018) An experimental evaluation on air purification performance of Clean-Air Heat Pump (CAHP) air cleaner. Build Env 127:69–76.  https://doi.org/10.1016/j.buildenv.2017.10.039CrossRefGoogle Scholar
  13. 13.
    Xiaowen S, Lin Z, Yuxin X (2015) Evaluation of a flue gas cleaning system of a circulating fluidized bed incineration power plant by the analysis of pollutant emissions. Powder Technol 286:9–15CrossRefGoogle Scholar
  14. 14.
    Chen SJ, Fu Y, Huang YX, Tao ZC, Zhu M (2016) Experimental investigation of CO2 separation by adsorption methods in natural gas purification. Appl Energy 179:329–337.  https://doi.org/10.1016/j.apenergy.2016.06.146CrossRefGoogle Scholar
  15. 15.
    Dmitriev AV, Zinurov VE, Dmitrieva OS, Nguyen WL (2017) Collecting particles from flue gases by rectangular separators. Bul of the Tech Un 20:78–80Google Scholar
  16. 16.
    Dmitriev AV, Dmitrieva OS, Madyshev IN, Nikolaev AN (2017) A device for fine dust removal. RU Patent No. 171615, 7 June 2017Google Scholar
  17. 17.
    Zaripov SK, Solov’eva OV, Solov’ev SA (2015) Inertial deposition of aerosol particles in a periodic row of porous cylinders. Aerosol Sci Technol 49:400–408.  https://doi.org/10.1080/02786826.2015.1036834CrossRefGoogle Scholar
  18. 18.
    Dmitrieva OS, Dmitriev AV, Madyshev IN, Nikolaev AN (2017) Flow Dynamics of Mass Exchangers with Jet-Bubbling Contact Devices. Chem Pet Eng 53:130–134.  https://doi.org/10.1007/s10556-017-0308-8CrossRefGoogle Scholar
  19. 19.
    Solovev SA, Soloveva OV, Popkova OS (2018) Numerical simulation of the motion of aerosol particles in open cell foam materials. Russ J Phys Chem A 92:603–606.  https://doi.org/10.1134/S0036024418030275CrossRefGoogle Scholar
  20. 20.
    Safikhani H, Mehrabian P (2016) Numerical study of flow field in new cyclone separators. Adv Powder Technol 27:379–387.  https://doi.org/10.1016/j.apt.2016.01.011CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • I. N. Madyshev
    • 1
  • O. S. Dmitrieva
    • 1
  • A. V. Dmitriev
    • 2
    Email author
  1. 1.Kazan National Research Technological UniversityKazanRussia
  2. 2.Kazan State Power Engineering UniversityKazanRussia

Personalised recommendations