Advertisement

Gear-Grinding Temperature Modeling and Simulation

  • N. V. LishchenkoEmail author
  • V. P. Larshin
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

New trends in the manufacture of gears are associated with the use of new gear-grinding technologies. Discontinuous profile gear grinding by a profile wheel, compared to the continuous generating gear grinding by a grinding worm, provides for a higher accuracy (DIN 3-6) but yields less performance through both the higher grinding temperature and possibility of grinding burns. The grinding temperature is one of the factors limiting the performance of the profile gear-grinding operation. There are two most commonly used methods involved for determining the grinding temperature: a fully analytical method based on analytical models and the simulation one based on the similar set of models which are working under computer control with the temperature field monitoring. However, the continuity and interrelation of these methods for determining and studying the profile gear-grinding temperature have not yet been investigated. The relevance of this problem is currently the most pronounced in the connection with the development of appropriate technological preconditions and gear-grinding subsystems for the grinding operation designing, monitoring, and diagnosing which allow adapting the elements of the grinding system to higher productivity. The software for these subsystems can be created on the basis of the analytical mathematical models of the temperature field because simulation modeling takes a lot of time. That is why, in other equal conditions, the comparison of the results of analytical and simulation modeling helps choosing the right way for further improvement of the profile grinding technology on CNC machines.

Keywords

Profile gear grinding Grinding temperature Modeling Simulation 

References

  1. 1.
    Larshin V, Lishchenko N (2019) Adaptive profile gear grinding boosts productivity of this operation on the CNC machine tools. Lect Notes Mech Eng part F2:79–88.  https://doi.org/10.1007/978-3-319-93587-4_9CrossRefGoogle Scholar
  2. 2.
    Larshin V, Lishchenko N (2018) Gear grinding system adapting to higher CNC grinder throughput. MATEC Web of Conferences, vol. 226, 04033, pp 1–6.  https://doi.org/10.1051/matecconf/201822604033
  3. 3.
    Lishchenko N (2018) Profile gear grinding temperature determination. Transactions of Kremenchuk Mykhailo Ostrohradskyi National University, pp 100–108.  https://doi.org/10.30929/1995-0519.2018.1.100-108
  4. 4.
    Larshin VP, Kovalchuk EN, Yakimov AV (1986) Primenenie resheniy teplofizicheskikh zadach k raschetu temperatury i glubiny defektnogo sloya pri shlifovanii (Application of solutions of thermophysical problems to the calculation of the temperature and depth of the defective layer during grinding). In: Interuniversity collection of scientific works, Perm, pp 9–16Google Scholar
  5. 5.
    Larshin VP (1999) Tekhnologiya mnogonitochnogo rezboshlifovaniya pretsizionnykh khodovykh vintov (Multi-thread grinding technology for precision ball-screws). Trudy Odes Politekhn un-ta 2(8):87–91Google Scholar
  6. 6.
    Christof C, Schlattmeier H et al (2006) Optimization of the gear profile grinding process utilizing an analogy process. Gear technology (November/December), pp 34–40Google Scholar
  7. 7.
    Klocke F, Schlattmeier H (2004) Surface damage caused by gear profile grinding and its effects on flank load carrying capacity. Gear technology (September/October), pp 44–53Google Scholar
  8. 8.
    Jermolajev S, Brinksmeier E, Heinzel C (2018) Surface layer modification charts for gear grinding. CIRP Annals—Manuf Technol 1:1–4.  https://doi.org/10.1016/j.cirp.2018.04.071CrossRefGoogle Scholar
  9. 9.
    Jin Tan, Yi Jun, Peng Siwei (2017) Determination of burn thresholds of precision gears in form grinding based on complex thermal modelling and Barkhausen noise measurements. Int J Adv Manuf Technol 88(1–4):789–800CrossRefGoogle Scholar
  10. 10.
    Fergania O, Shaoa Y, Lazoglub I et al (2014) Temperature Effects on Grinding Residual Stress. In: 6th CIRP International Conference on High Performance Cutting, HPC 2014, pp 2–6.  https://doi.org/10.1016/j.procir.2014.03.100
  11. 11.
    Deivanathan R, Vijayaraghavan L (2013) Theoretical analysis of thermal profile and heat transfer in grinding. Int J Mech Mater Eng (IJMME) 8(1):21–31Google Scholar
  12. 12.
    Yadav RK (2014) Analysis of grinding process by the use of finite element methods. Elk Asia Pacific J Manuf Sci Eng 1(1)Google Scholar
  13. 13.
    Foeckerer T, Zaeh M, Zhang O (2013) A three-dimensional analytical model to predict the thermo-metallurgical effects within the surface layer during grinding and grind-hardening. Int J Heat Mass Transf 56:223–237.  https://doi.org/10.1016/j.ijheatmasstransfer.2012.09.029CrossRefGoogle Scholar
  14. 14.
    González-Santander JL (2016) Maximum temperature in dry surface grinding for high Peclet number and arbitrary heat flux profile. Mathematical Problems in Engineering—2016, pp 1–9.  https://doi.org/10.1155/2016/8470493
  15. 15.
    Guo C, Malkin S (1995) Analysis of transient temperatures in grinding. J Eng Ind 117:571–577.  https://doi.org/10.1115/1.2803535CrossRefGoogle Scholar
  16. 16.
    Heinzel C, Sölter J, Jermolajev S et al (2014) A versatile method to determine thermal limits in grinding. In 2nd CIRP Conference on Surface Integrity (CSI), Procedia CIRP, vol 13, pp 131–136.  https://doi.org/10.1016/j.procir.2014.04.023
  17. 17.
    Beizhi L, Dahu Z, Zhenxin Z et al (2011) Research on workpiece surface temperature and surface quality in high-speed cylindrical grinding and its inspiration. Adv Mater Res 325:19–27.  https://doi.org/10.4028/www.scientific.net/AMR.325.19CrossRefGoogle Scholar
  18. 18.
    Li Hao N, Axinte D (2017) On a stochastically grain-discretised model for 2D/3D temperature mapping prediction in grinding. Int J Mach Tools Manuf, pp 1–27.  https://doi.org/10.1016/j.ijmachtools.2017.01.004
  19. 19.
    Tadeu A, Simoes N (2006) Three-dimensional fundamental solutions for transient heat transfer by conduction in an unbounded medium, half-space, slab and layered media. Eng Anal Bound Elem 30(5):338–349.  https://doi.org/10.1016/j.enganabound.2006.01.011CrossRefzbMATHGoogle Scholar
  20. 20.
    Xun Chen, Öpöz T (2016) Effect of different parameters on grinding efficiency and its monitoring by acoustic emission. Prod Manuf Res Open Access J4(1):190–208.  https://doi.org/10.1080/21693277.2016.1255159CrossRefGoogle Scholar
  21. 21.
    Malkin S, Guo C (2007) Thermal analysis of grinding. Annal CIRP 56:760–782.  https://doi.org/10.1016/j.cirp.2007.10.005CrossRefGoogle Scholar
  22. 22.
    Jaeger JC (1942) Moving sources of heat and temperature at sliding contact. Proc Roy Soc N S Wales 76:203–224Google Scholar
  23. 23.
    Carslaw HS, Jaeger JC (1959) Conduction of heat in solids, 2nd edn. University Press, Oxford, p 510zbMATHGoogle Scholar
  24. 24.
    Sipaylov VA (1978) Teplovye protsessy pri shlifovanii i upravlenie kachestvom poverkhnosti (Thermal processes during grinding and surface quality control). Moskva, Mashinostroenie, p 167Google Scholar
  25. 25.
    Larshin V, Lishchenko N (2018) Research methodology for grinding systems. Russ Eng Res 38(9):712–713.  https://doi.org/10.3103/S1068798X18090204CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  1. 1.Odessa National Academy of Food TechnologiesOdessaUkraine
  2. 2.Odessa National Polytechnic UniversityOdessaUkraine

Personalised recommendations