Substantiation of Parameters of Machine with Volumetric Hydraulic Drive for Formation of Wells in Ground

  • A. V. GorinEmail author
  • N. V. Tokmakov
  • I. S. Kyznetsov
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)


The article discusses the prerequisites for the substantiation of the parameters of the machine with a volumetric hydraulic drive. A rheological model of the soil is presented in the modernized Maxwell model. A mathematical model of the operation mode of the machine with a volumetric hydraulic drive for the formation of wells in the ground is presented. A structural diagram of the combined drive of the working body of the machine is presented. For the experimental confirmation of the obtained analytical dependencies and results, a full-size test stand has been developed. As a result of the analysis of the data obtained on the test bench and field tests, the graphical dependence of the power consumption of drilling through on a single machine impact is presented. A dimensionless coefficient of power impact on the face was proposed, allowing to evaluate the possible use of a machine with a volumetric hydraulic drive for the formation of wells in the soil.


Hydraulic drive Experimental stand Mathematical model Rheological model Soil Well 



This work was supported by the Ministry of Education and Science of the Russian Federation under the project No 9.2952.2017/4.6.


  1. 1.
    Balandinsky E, Vasiliev V, Minaev V, Ladyzhensky V (1991) Trenchless laying of engineering communications. Subsoil, MoscowGoogle Scholar
  2. 2.
    Vasiliev N (1994) Closed piping. Subsoil, MoscowGoogle Scholar
  3. 3.
    Gorin A, Yeshutkin D, Gorina M (2015) Volumetric hydraulic drive of the combined machine for formation of wells in soils. State University—USPC, OrelGoogle Scholar
  4. 4.
    Gorbunov V, Yeshutkin D, Piven G (1992) Hydraulic and pneumatic drilling hammers. Institute of Mining, NovosibirskGoogle Scholar
  5. 5.
    Ushakov L, Kotylev Y, Kravchenko V (2000) Hydraulic impact machines. Engineering, MoscowGoogle Scholar
  6. 6.
    Bashta T (2005) Hydraulics, hydraulic machines and hydraulic drives. Engineering, MoscowGoogle Scholar
  7. 7.
    Gorin A, Yeshutkin D, Gorina M (2015) The use of hydraulic impact machines for the formation of wells in the soil. State University—USPC, OrelGoogle Scholar
  8. 8.
    Kushul M, Shlyakhtin A (1988) Theory of vibration immersion of cylindrical rod in elastic-plastic medium. Subsoil, MoscowGoogle Scholar
  9. 9.
    Rakishev B, Sherstyuk B, Yastrebow E (1998) Drilling of special wells in frozen rocks. Subsoil, MoscowGoogle Scholar
  10. 10.
    Lavrov G, Saratov T (1978) Mechanization of construction of trunk pipeline crossings under roads and railways. Subsoil, MoscowGoogle Scholar
  11. 11.
    Gorin A, Eshutkin D, Zhuravleva A (2011) Modeling of actuator static and dynamic machines for the trenchless construction of pipelines. Fundam Appl Probl Eng Technol 3(287):20–26Google Scholar
  12. 12.
    Zelenin A (1968) Foundations of destruction of soils by mechanical means. Engineering, MoscowGoogle Scholar
  13. 13.
    Protasov Y (1985) The theoretical foundations of mechanical destruction of rocks. Subsoil, MoscowGoogle Scholar
  14. 14.
    Kershenbaum N, Minaev V (1984) Drilling of horizontal and vertical wells by impact method. Subsoil, MoscowGoogle Scholar
  15. 15.
    Holstein M (1983) Mechanical properties of soils. Stroiizdat, MoscowGoogle Scholar
  16. 16.
    Yeshutkin D, Zhuravleva A, Gorin A (2011) The rigidity of the pressure line elements of hydraulic impact machines. Bull TulGU Ser Actual Probl Mech 7:58–63Google Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • A. V. Gorin
    • 1
    Email author
  • N. V. Tokmakov
    • 1
  • I. S. Kyznetsov
    • 2
  1. 1.Orel State University named after I.S. TurgenevOrelRussia
  2. 2.Orel State Agrarian University named after N.V. ParahinOrelRussia

Personalised recommendations