Energy Consumption Modeling of Machining Processes

  • V. SalnikovEmail author
  • Yu. Frantsuzova
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)


Energy consumption management is an effective tool for adapting the production system under the conditions of changing the operating mode. Rational energy consumption improves not only the energy performance of the enterprise but also the ecological and general economic parameters. Energy consumption assessment of each technological operation and for each workplace requires all production facilities (equipment, materials, operations, etc.) to be clearly identified. This study represents machining operations as the transformation of workpiece’s surface into the desired surface of the part. This is important in order to evaluate its effectiveness in terms of energy conversion. This approach serves as the basis for mathematical modeling of machining operations’ energy consumption, which considers the type, parameters, and time of exposure. This information is obtained from the control program text at the preparatory stage by means of syntactic and lexical analysis. This chapter presents a planned schedule of the machine tool’s energy consumption during the processing of a given surface. A processing experiment, performed on real equipment, helped to obtain a graph of actual energy consumption. Finally, the paper discusses efficiency strategies that can be used at some hierarchical levels of an industrial enterprise.


Machining Energy efficiency Energy consumption Industrial production Mathematical modeling 


  1. 1.
    Salnikov VV, Ivutin AN (2017) The role of production information for the service of the main energy production system. Izv Tula State Univ Tech Sci 8(1):165–170Google Scholar
  2. 2.
    Salnikov VS (2003) Technological basis for energy efficiency of production systems. TulaGoogle Scholar
  3. 3.
    Gludkin OP, Gorbunov NM, Gurov AI (1999) Total quality management. In: Gludkina (ed.) MoscowGoogle Scholar
  4. 4.
    North K (2001) Quality and efficiency management: module program. In: Prokopenko I (ed.) MoscowGoogle Scholar
  5. 5.
    Venikov VA (1990) Energy saving technology. Power supply of the national economy. MoscowGoogle Scholar
  6. 6.
    Smith CB (1981) Energy management principles. Elmsford, New YorkGoogle Scholar
  7. 7.
    Thuman A (1984) Handbook for energy audit. Atlanta, GeorgiaGoogle Scholar
  8. 8.
    Erzin OA, Salnikov VV (2014) One aspect efficiency evaluation of technological systems. Izv Tula State Univ Tech Sci 11(2):594–603Google Scholar
  9. 9.
    Salnikov VV, Ivutin AN, Frantsuzova YV (2018) Computer support use of energy resources in the production system. Izv Tula State Univ Tech Sci 6:106–114Google Scholar
  10. 10.
    Salnikov V, Ivutin AN (2016) Increasing energy efficiency in production systems. In: Collection of theses of the scientific-practical conference “innovative high-tech information technologies”. Materials, TulaGoogle Scholar
  11. 11.
    Salnikov VV, Ivutin AN (2017) One of the aspects of collecting technological information for assessing the efficiency of production energy consumption. In: Collection of theses of the congress of young scientists, Electronic edn. ITMO University, Saint-PetersburgGoogle Scholar
  12. 12.
    Kireeva NV (2012) The methodology of the rationing of the power consumption at the industrial enterprises: problems and development directions. “Kazan Science”, pp 30–33Google Scholar
  13. 13.
    Salnikov VV (2016) Methodology of technological operations’ energy consumption rationing. In: Intellectual and information systems. Materials, TulaGoogle Scholar
  14. 14.
    Semenova EI, Vlchkevicha LI (1987) Automation of discrete production. MoscowGoogle Scholar
  15. 15.
    Alifanov AY (1993) The basic principles of electrophysical, electromechanical and combined processing methods. Russ Eng Res 41–45Google Scholar
  16. 16.
    Pukhovsky ES (1989) Technological bases of flexible automated production. KievGoogle Scholar
  17. 17.
    Rastrigin LA (1980) Modern principles of complex objects management. MoscowGoogle Scholar
  18. 18.
    Tishchenko N (1986) Introduction to the design of control systems. MoscowGoogle Scholar
  19. 19.
    Bobrov VF (1975) Fundamentals of metal cutting theory. MoscowGoogle Scholar
  20. 20.
    Poduraev VN (1985) Technology of physico-chemical methods of machining. MoscowGoogle Scholar
  21. 21.
    Salnikov VV (2017) Mathematical model of industrial equipment’s energy consumption In: Intellectual and information systems: materials of the international scientific and technical conference, TulaGoogle Scholar
  22. 22.
    Salnikov VV (2018) Computer based support for efficient use of energy in manufacturing. In: 7th Mediterranean conference on embedded computing (MECO).
  23. 23.
    Malov AN (1973) Handbook of metallurgy, vol 4 (ed: Malov AN)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  1. 1.Tula State UniversityTulaRussia

Personalised recommendations