Advertisement

Circular Fins with Staggered Tubes, Low Integral Fin Tubes

  • Sujoy Kumar Saha
  • Hrishiraj Ranjan
  • Madhu Sruthi Emani
  • Anand Kumar Bharti
Chapter
Part of the SpringerBriefs in Applied Sciences and Technology book series (BRIEFSAPPLSCIENCES)

Abstract

This chapter gives the details of circular fins with staggered tubes and low integral fin tubes. The effect of longitudinal and transverse spacing of fins on the heat transfer and pressure drop performance of finned tube banks is presented in detail.

Keywords

Longitudinal spacing Transverse spacing Fin tube banks Row correction factor Low integral fin tube 

References

  1. Ackerman JW, Brunsvold AR (1970) Heat transfer and draft loss performance of extended surface tube banks. J Heat Transf Trans ASME 92:215–220CrossRefGoogle Scholar
  2. Baker CJ (1991) Oscillations of horseshoe vortex systems. ASME J Fluids Eng 113(3):489–495MathSciNetCrossRefGoogle Scholar
  3. Brauer H (1961) Spiral fin tubes for cross flow heat exchangers. Kaltetechnik 13:274–279Google Scholar
  4. Brauer H (1964) Compact heat exchangers. Chem Prog Eng (London) 45(8):451–460Google Scholar
  5. Briggs DE, Young EH (1963) Convection heat transfer and pressure drop of air flowing across triangular pitch banks of finned tubes. Chem Eng Prog Symp Ser 59(41):1–10Google Scholar
  6. Buyruk E, Johnson MW, Owen I (1998) Numerical and experimental study of flow and heat transfer around a tube in cross-flow at low Reynolds number. Int J Heat Mass Transf 19:223–232Google Scholar
  7. ESDU (1985) Low-fin staggered tube banks: heat transfer and pressure loss for turbulent single-phase crossflow. Eng Sci. Data Unit, ESDU Item No. 84016Google Scholar
  8. Fabbri G (1998) Heat transfer optimization in internally finned tubes under laminar flow conditions. Int J Heat Mass Transf 41(10):1243–1253zbMATHCrossRefGoogle Scholar
  9. Fiebig M (1995) Vortex generators for compact heat exchangers. J Enhanc Heat Transf 2:43–61CrossRefGoogle Scholar
  10. Gianollo E, Cuti F (1981) Heat transfer coefficients and pressure drop for air coolers with different numbers of rows under induced and forced draft. Heat Transf Eng 3(1):38–48CrossRefGoogle Scholar
  11. Groehn HG (1977) Flow and heat transfer studies of a staggered tube bank heat exchanger with low fins at high Reynolds numbers. Central Library of the Julich Nuclear Research Center GmbH, Julich, GermanyGoogle Scholar
  12. Jahromi Bastani AA, Mitra NK, Biswas G (1999) Numerical investigations on enhancement of heat transfer in a compact fin-and-tube heat exchanger using delta winglet type vortex generators. J Enhanc Heat Transf 6(1):1–11CrossRefGoogle Scholar
  13. Jain A, Biswas G, Maurya D (2003) Winglet-type vortex generators with common-flow-up configuration for fin-tube heat exchangers. Numer Heat Transf A 43(2):201–219CrossRefGoogle Scholar
  14. Jayavel S, Tiwari S (2010) Effect of tube spacing on heat transfer performance of staggered tube bundles in the presence of vortex generators. J Enhanc Heat Transf 17(3):271–291CrossRefGoogle Scholar
  15. Joardar A, Jacobi AM (2008) Heat transfer enhancement by winglet-type-vortex generator arrays in compact plain-fin-and-tube heat exchangers. Int J Refrig 31(1):87–97CrossRefGoogle Scholar
  16. Kawaguchi K, Okui K, Kashi T (2005) Heat transfer and pressure drop characteristics of finned tube banks in forced convection (comparison of heat transfer and pressure drop characteristics of serrated and spiral fins). J Enhanc Heat Transf 12(1):1–20CrossRefGoogle Scholar
  17. Kawamura T et al (1991a) Study on heat transfer and pressure drop characteristics of finned tube banks (1st report heat transfer characteristics and predicting equations of circular finned tube banks). Trans Jpn Soc Mech Eng B 57(537):1752–1758CrossRefGoogle Scholar
  18. Kawamura T et al (1991b) Study on heat transfer and pressure drop characteristics of finned tube banks (2nd report pressure drop characteristics and predicting equations of circular finned tube banks). Trans Jpn Soc Mech Eng B 57(537):1759–1764CrossRefGoogle Scholar
  19. Krupiczka R, Rotegel A, Walczyk H, Dobner L (2003) An experimental study of convective heat transfer from extruded type helical finned tubes. Chem Eng Process 42(1):29–38CrossRefGoogle Scholar
  20. Kwak KM, Torii K, Nishino K (2005) Simultaneous heat transfer enhancement and pressure loss reduction for finned-tube bundles with the first or two transverse rows of built-in winglets. Exp Thermal Fluid Sci 29:625–632CrossRefGoogle Scholar
  21. Lozza G, Merlo U (2001) An experimental investigation of heat transfer and friction losses of interrupted and wavy fins for fin-and-tube heat exchangers. Int J Refrig 24:409–416CrossRefGoogle Scholar
  22. Ouzzane M, Galanis N (2001) Numerical analysis of mixed convection in inclined tubes with external longitudinal fins. Sol Energy 71(3):199–211CrossRefGoogle Scholar
  23. Qiu Y, Tian M, Guo Z (2013) Natural convection and radiation heat transfer of an externally-finned tube vertically placed in a chamber. Heat Mass Transf 49(3):405–412CrossRefGoogle Scholar
  24. Rabas TI, Huber FV (1989) Row number effects on the heat transfer performance of in-line finned tube banks. Heat Trans Eng 10(4):19–29CrossRefGoogle Scholar
  25. Rabas TJ, Eckels PW (1975) Heat transfer and pressure drop performance of segmented extended surface tube bundles. In: Proc. AIChE-ASME heat transfer conference, San Francisco, pp 1–8Google Scholar
  26. Rabas TJ, Eckels PW, Sabatino RA (1981) The effect of fin density on the heat transfer and pressure drop performance of low finned tube banks. Chem Eng Commun 10(1):127–147CrossRefGoogle Scholar
  27. Rabas TJ, Taborek J (1987) Survey of turbulent forced-convection heat transfer and pressure drop characteristics of low-finned tube banks in cross flow. Heat Trans Eng 8(2):49–62CrossRefGoogle Scholar
  28. Robinson KK, Briggs DE (1966) Pressure drop of air flowing across triangular pitch banks of finned tubes. Chem Eng Prog Symp Ser 62(64):177–184Google Scholar
  29. Schmidt E (1963) Heat transfer at finned tubes and computations of tube bank heat exchangers. Kaltetechnik 15(4): 98 and 15(12): 370Google Scholar
  30. Sun FZ, Zhang MY, Huang XY, Shi YT, Dong XG (2002) Experimental study of enhanced heat transfer with Ni-based impacted longitudinal finned tubes. J Hydrodyn 17(4):467–471. (in Chinese)Google Scholar
  31. Wang QW, Lin M, Zeng M, Tian L (2008) Computational analysis of heat transfer and pressure drop performance for internally finned tube with three different longitudinal fins. Heat Mass Transf 45:147–156CrossRefGoogle Scholar
  32. Wang QW, Lin M, Zeng M (2009) Effect of lateral fin profiles on turbulent flow and heat transfer performance of internally finned tubes. Appl Therm Eng 29(14/15):3006–3013CrossRefGoogle Scholar
  33. Webb RL (1987) Enhancement of single-phase heat transfer (Chapter 17). In: Kakac S, Shah RK, Aung W (eds) Handbook of single-phase heat transfer. Wiley, New York, pp 17.1–17.62Google Scholar
  34. Weierman C, Taborek J, Marner WJ (1974) Comparison of the performance of in-line and staggered banks of tubes with segmented fins. AIChE Symp Ser 74(174):39–46Google Scholar
  35. Weyrauch E (1969) The influence of geometry of tube banks on heat transfer and pressure drop, when the fluid is flowing normal to the finned bank. Kaltetechnik-Klimatisieurung 21:62–65Google Scholar
  36. Wu JM, Tao WQ (2007) Numerical computation of laminar natural convection heat transfer around a horizontal compound tube with external longitudinal fins. Heat Transf Eng 28(2):93–102CrossRefGoogle Scholar
  37. Yu B, Tao WQ (2004) Pressure drop and heat transfer of turbulent flow in annular tubes with internal wave-like longitudinal fins. Heat Mass Transf 40:643–651CrossRefGoogle Scholar
  38. Yu B, Nie JH, Wang QW, Tao WQ (1999) Experimental study on the pressure drop and heat transfer characteristics of tubes with internal wave-like longitudinal fins. Heat Mass Transf 35:65–73CrossRefGoogle Scholar
  39. Yudin VF, Tokhtarowa LS (1964) Heat emission and resistance of checkerboard and corndor fin clusters. Energomashinostroenie 1:11–13Google Scholar

Copyright information

© The Author(s), under exclusive license to Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Sujoy Kumar Saha
    • 1
  • Hrishiraj Ranjan
    • 1
  • Madhu Sruthi Emani
    • 1
  • Anand Kumar Bharti
    • 1
  1. 1.Mechanical Engineering DepartmentIndian Institute of Engineering, Science and Technology, ShibpurHowrahIndia

Personalised recommendations