Advertisement

Round Tubes Having Plain-Plate Fins

  • Sujoy Kumar Saha
  • Hrishiraj Ranjan
  • Madhu Sruthi Emani
  • Anand Kumar Bharti
Chapter
Part of the SpringerBriefs in Applied Sciences and Technology book series (BRIEFSAPPLSCIENCES)

Abstract

The performance characteristics of round tubes having plain-plate fins are discussed in this chapter. The concepts of wavy fins, louvred fins, multi louvred fins, fin numbering, etc. are explained in detail. Staggered and in-line arrangement of tube bundles and fin spacing are the other topics covered here. The correlations for configurations are also presented.

Keywords

Plain-plate fins Wavy fin Louvred fin Multi-louvred fin In-line arrangement Staggered arrangement 

References

  1. Abu Madi M, Johns RA, Heikal MR (1998) Performance characteristics correlation for round tube and plate finned heat exchangers. Int J Refrig 21:507–517CrossRefGoogle Scholar
  2. Ahmadi M, Mostafavi G, Bahrami M (2014) Natural convection from rectangular interrupted fins. Int J Therm Sci 82(1):62–71CrossRefGoogle Scholar
  3. Alam I, Ghoshdastidar PS (2002) A study of heat transfer effectiveness of circular tubes with internal longitudinal fins having tapered lateral profiles. Int J Heat Mass Transf 45(6):1371–1376zbMATHCrossRefGoogle Scholar
  4. Al-Arabi M, Khamis M (1982) Natural convection heat transfer from inclined cylinders. Int J Heat Mass Transf 25(I):3–15CrossRefGoogle Scholar
  5. An BH, Kim HJ, Kim DK (2012) Nusselt number correlation for natural convection from vertical cylinders with vertically oriented plate fins. Exp Thermal Fluid Sci 41:59–66CrossRefGoogle Scholar
  6. Atayılmaz SO, Teke I (2009) Experimental and numerical study of the natural convection from a heated horizontal cylinder. Int Commun Heat Mass Transf 36:731–738CrossRefGoogle Scholar
  7. Atayılmaz SO, Teke I (2010) Experimental and numerical study of the natural convection from a heated horizontal cylinder wrapped with a layer of textile material. Int Commun Heat Mass 37:58–67CrossRefGoogle Scholar
  8. Atkinson KN, Drakulic R, Heikal MR, Cowell TA (1998) Two- and three-dimensional numerical models of flow and heat transfer over louvered fin arrays in compact heat exchangers. Int J Heat Mass Transf 41:4063–4080zbMATHCrossRefGoogle Scholar
  9. Awad M, Muzychka YS (2011) Models for pressure drop and heat transfer in air cooled compact wavy fin heat exchangers. J Enhanc Heat Transf 18(3):191–207CrossRefGoogle Scholar
  10. Bahrami S, Rahimian MH, Mohammadbeigi H, Hosseinimanesh H (2012) Thermal-hydraulic study of multi-louvered fins in compact heat exchangers and recommendations for improvement. J Enhanc Heat Transf 19(1):53–61CrossRefGoogle Scholar
  11. Beckwith TG, Marangoni RD, Lienhard JH (1990) Mechanical measurements, 5th edn. Addison-Wesley Publishing Company, New York, pp 45–112Google Scholar
  12. Bhise NV, Katte SS, Venkateshan SP (2002) A numerical study of corrugated structure for space radiators. In: 16th national and 5th ISHMT–ASME heat and mass transfer conference Kolkata, pp 520–526Google Scholar
  13. Bilen K, Yapici S (2002) Heat transfer from a surface fitted with rectangular blocks at different orientation angle. Heat Mass Transf 38:649–655CrossRefGoogle Scholar
  14. Black WZ (1973) Optimization of the directional emission from V-groove and rectangular cavities. J Heat Transf 95:31–36CrossRefGoogle Scholar
  15. Black WZ, Schoenhals RJ (1968) A study of directional radiation properties of specially pre pared ‘V’-groove cavities. J Heat Transf 90:420–428CrossRefGoogle Scholar
  16. Chae MS, Chung BJ (2011) Effect of pitch-to-diameter ratio on the natural convection heat transfer of two vertically aligned horizontal cylinders. Exp Thermal Fluid Sci 66:5321–5329Google Scholar
  17. Chang YJ, Hsu KC (2000) Generalized friction correlation for louver fin geometry. Int J Heat Mass Transf 43(12):2237–2243CrossRefGoogle Scholar
  18. Chang Y, Wang C (1996) Air-side performance of brazed aluminium heat exchangers. J Enhanc Heat Transf 3(1):15–28CrossRefGoogle Scholar
  19. Chang Y, Wang C (1997) A generalized heat transfer correlation for louvered fin geometry. Int Heat Transf 40(3):533–544MathSciNetCrossRefGoogle Scholar
  20. Chang Y, Wang C, Chang W (1994) Heat transfer and flow characteristics of automotive brazed aluminium heat exchangers. ASHRAE Trans 100(2):643–652Google Scholar
  21. Chen HT, Hsu WL (2007) Estimation of heat transfer coefficient on the fin of annular-finned tube heat exchangers in natural convection for various fin spacings. Int J Heat Mass Transf 50:1750–1761zbMATHCrossRefGoogle Scholar
  22. Chung BTF, Nguyen LD (1987) Thermal analysis and optimum design for radiating spine of various geometries. In: Proceedings of the international symposium on heat transfer science and technology Beijing People’s Republic of China October 15–18 198 (A87-33101 13-34). Hemisphere Publishing Corp, Washington, DC, pp 510–517Google Scholar
  23. Dillen EL, Webb RL (1994) Rationally based heat transfer and friction correlations for the louver fin geometry. SAE Tech Paper Ser 94050:600–607Google Scholar
  24. Dong J, Chen J, Chen Z, Zhang W, Zhou Y (2007) Heat transfer and pressure drop correlations for the multi-louvered fin compact heat exchangers. Energy Convers Manag 48:1506–1515CrossRefGoogle Scholar
  25. Eckert E, Irvine T (1960) Pressure drop and heat transfer in a duct with triangular cross-section. ASME J Heat Transf 83:125–136CrossRefGoogle Scholar
  26. Elenbaas W (1942) Heat dissipation of parallel plates by free convection. Physica 9(1):1–28zbMATHCrossRefGoogle Scholar
  27. El-Saed SA, Mohamed SM, Abdel-Latif AM, Abouda AE (2002) Investigation of turbulent heat transfer and fluid flow in longitudinal rectangular fin-arrays of different geometries and shrouded fin array. Exp Thermal Fluid Sci 26:879–900CrossRefGoogle Scholar
  28. Fabbri G (1998) Heat transfer optimization in internally finned tubes under laminar flow conditions. Int J Heat Mass Transf 41(10):1243–1253zbMATHCrossRefGoogle Scholar
  29. Fabbri G (1999) Optimum profiles for asymmetrical longitudinal fins in cylindrical ducts. Int J Heat Mass Transf 4(23):511–523zbMATHCrossRefGoogle Scholar
  30. Fiebig M, Gorsse-Georgemann A, Chen Y, Mitra NK (1995) Conjugate heat transfer of a finned tube part A: heat transfer behaviour and occurrence of heat transfer reversal. Numer Heat Transf Part A 28:133–146CrossRefGoogle Scholar
  31. Gorchakov VS, Panevin IG (1975) Effectiveness of radiating fins covered with V-shaped grooves. http://techreports.iarc.nasa.gov/egiin/ NTRS
  32. Gorchakov VS, Panevin IG (1976) Efficiency of radiating fins covered with V-shaped grooves. J High Temp 13(4):733–738Google Scholar
  33. Gray DL, Webb RL (1986) Heat transfer and friction correlations for plate fin-and-tube heat exchangers having plain fins. In: Heat transfer 1986. Proceedings of the eighth international heat transfer conference, pp 2745–2750Google Scholar
  34. Haghighi SS, Goshayeshi HR, Safaei MR (2018) Natural convection heat transfer enhancement in new designs of plate-fin based heat sinks. Int J Heat Mass Transf 125:640–647CrossRefGoogle Scholar
  35. Haldar SC, Kochhar GS, Manohar K, Sahoo RK (2007) Numerical study of laminar free convection about a horizontal cylinder with longitudinal fins of finite thickness. Int J Therm Sci 46:692–698CrossRefGoogle Scholar
  36. Holman JP (2000) Experimental methods for engineering. Ch. 2 and 3. McGraw-Hill, New YorkGoogle Scholar
  37. Incropera FP, DeWitt DP (2001) Fundamentals of heat mass transfer, 5th edn. Wiley, New YorkGoogle Scholar
  38. Islam MD, Oyakawa K, Yaga M (2008) Heat transfer enhancement from a surface affixed with rectangular fins of different patterns and arrangement in duct flow. J Enhanc Heat Transf 15(1):31–50CrossRefGoogle Scholar
  39. Jacob ML (1938) Heat transfer and flow resistance in cross flow of gases over tube banks. Trans ASME 60:384Google Scholar
  40. Jeon D, Byon C (2017) Thermal performance of plate fin heat sinks with dual-height fins subject to natural convection. Int J Heat Mass Transf 113:1086–1092CrossRefGoogle Scholar
  41. Ji C, Qin Z, Low Z, Dubey S, Choo FH, Duan F (2018) Non-uniform heat transfer suppression to enhance PCM melting by angled fins. Appl Therm Eng 129:269–279CrossRefGoogle Scholar
  42. Joo Y, Kim SJ (2015) Comparison of thermal performance between plate-fin and pin fin heat sinks in natural convection. Int J Heat Mass Transf 83:345–356CrossRefGoogle Scholar
  43. Junqi D, Jiangping C, Zhijiu C, Yimin Z, Wenfeng Z (2007) Heat transfer and pressure drop correlations for the wavy fin and flat tube heat exchangers. Appl Therm Eng 27(11–12):2066–2073CrossRefGoogle Scholar
  44. Kadle DS, Sparrow EM (1986) Numerical and experimental study of turbulent heat transfer and fluid flow in longitudinal fin array. ASME J Heat Transf 108:16–23CrossRefGoogle Scholar
  45. Kaminski S (2002) Numerische Simulation der luftseitigen Stromungs-und Warmetransportvorgange in Lamellenrohr-Warmeubertragern. Techn. Univ. Bergakad, FreibergGoogle Scholar
  46. Kaminski S, Groß U (2003) Luftseitige Transportprozesse in Lamellenrohrbundeln—numerische Untersuchung. Ki Luft und Kaltetechnik (5):220–224Google Scholar
  47. Kayansayan N (1993) Heat transfer characterization of flat plain fins and round tube heat exchangers. Exp Thermal Fluid Sci 6(3):263–272CrossRefGoogle Scholar
  48. Kim N-H, Youn B, Webb RL (1999) Air-side heat transfer and friction correlations for plain fin-and-tube heat exchangers with staggered tube arrangements. J Heat Transf 121(3):662–667CrossRefGoogle Scholar
  49. Krikkis RN, Razelos P (2002) Optimum design of spacecraft radiators with longitudinal rectangular and triangular fins. J Heat Transf 124:805–811CrossRefGoogle Scholar
  50. Krikkis RN, Razelos P (2003) The optimum design of radiating and convective-radiating circular fins. J Heat Transf Eng 24(3):17–41CrossRefGoogle Scholar
  51. Krishnaprakas CK (1996) Optimum design of radiating rectangular plate fin array extending from a plane wall. J Heat Transf 118:490–493CrossRefGoogle Scholar
  52. Kumar SS, Venkateshan SP (1994) Optimized tubular radiator with annular fins on a non-isothermal base. Int J Heat Fluid Flow 15:399–409CrossRefGoogle Scholar
  53. Kumar R (1997) Three-dimensional natural convective flow in a vertical annulus with longitudinal fins. Int J Heat Mass Transf 40(14):3323–3334zbMATHCrossRefGoogle Scholar
  54. Lawson MJ, Thole KA (2008) Heat transfer augmentation along the tube wall of a louvered fin heat exchanger using practical delta winglets. Int J Heat Mass Transf 51:2346–2360CrossRefGoogle Scholar
  55. Lee M, Kim HJ, Kim DK (2016) Nusselt number correlation for natural convection from vertical cylinders with triangular fins. Appl Therm Eng 93:1238–1247CrossRefGoogle Scholar
  56. Lin Y-T, Hwang Y-M, Wang C-C (2002) Performance of the herringbone wavy fin under dehumidifying conditions. Int J Heat Mass Transf 45:5035–5044CrossRefGoogle Scholar
  57. Liu XY, Jensen MK (1999) Numerical investigation of turbulent flow and heat transfer in internally finned tubes. J Enhanc Heat Transf 6(2–4):105–119CrossRefGoogle Scholar
  58. Lyman AC, Stephan RA, Thole KA, Zhang LW, Memory SB (2002) Scaling of heat transfer coefficients along louvered fins. Exp Thermal Fluid Sci 26:547–563CrossRefGoogle Scholar
  59. McQuiston FC (1978) Correlation of heat, mass, and momentum transport coefficients for plate-fin-tube heat transfer for surfaces with staggered tube. ASHRAE Trans 54(Part 1):294–309Google Scholar
  60. Micheli L, Reddy K, Mallick TK (2016) Experimental comparison of micro-scaled plate-fins and pin-fins under natural convection. Int Commun Heat Mass Transf 75:59–66CrossRefGoogle Scholar
  61. Mohammadian SK, Zhang Y (2017) Cumulative effects of using pin fin heat sink and porous metal foam on thermal management of lithium-ion batteries. Appl Therm Eng 118:375–384CrossRefGoogle Scholar
  62. Mokheimer EMA (2002) Performance of annular fins with different profiles subject to variable heat transfer coefficient. Int J Heat Mass Transf 45:3631–3642zbMATHCrossRefGoogle Scholar
  63. Molki M, Faghri M, Ozbay O (1995) A correlation for heat transfer and wake effect in the entrance region of an inline array of rectangular blocks simulating electronic components. ASME J Heat Transf 117:40–46CrossRefGoogle Scholar
  64. Mon MS, Gross U (2004) Numerical study of fin-spacing effects in annular-finned tube heat exchangers. Int J Heat Mass Transf 47(8–9):1953–1964CrossRefGoogle Scholar
  65. Muley A, Borghese J, Manglik RM, Kundu J (2002) Experimental and numerical investigation of thermal-hydraulic characteristics of wavy-channel compact heat exchanger. In: Proc. 12th international heat transfer conference France, vol 4, pp 417–422Google Scholar
  66. Muley A, Borghese JB, White SL, Manglik RM (2006) Enhanced thermal-hydraulic performance of a wavy-plate fin compact heat exchanger: effect of corrugation severity. In: Proc. 2006 ASME international mechanical engineering congress and exposition (IMECE2006), Chicago, IL, USA, IMECE2006-14755Google Scholar
  67. Murali JG, Katte SS (2008) Experimental investigation of threaded, grooved, and tapered radiating pin-fin. J Enhanc Heat Transf 15(3):199–209CrossRefGoogle Scholar
  68. Muzychka YS (1999) Analytical and experimental study of fluid friction and heat transfer in low Reynolds number flow heat exchangers. Ph. D Thesis. University of Waterloo, Waterloo, ONGoogle Scholar
  69. Muzychka YS, Kenway G (2009) A model for the thermal hydraulic characteristics of the offset strip fin array for large Prandtl number liquids. J Enhanc Heat Transf 16(1):73–92CrossRefGoogle Scholar
  70. Na TY, Chiou JP (1980) Turbulent natural convection over a slender circular cylinder. Warme Stoffubertrag 14:157–164CrossRefGoogle Scholar
  71. Ohara J, Koyama S (2012) Falling film evaporation of pure refrigerant HCFC123 in a plate-fin heat exchanger. J Enhanc Heat Transf 19(4):301–311CrossRefGoogle Scholar
  72. Olson DA (1992) Heat transfer in thin, compact heat exchangers with circular, rectangular, or pin-fin flow passages. ASME J Heat Transf 114:373–382CrossRefGoogle Scholar
  73. Oyakawa K, Furukawa Y, Taira T, Senaha I (1993) Effect of vortex generators on heat transfer enhancement in a duct. In: Proceedings of the experimental heat transfer, fluid mechanics and thermodynamics Honolulu, Hawaii, vol 1, pp 633–640Google Scholar
  74. Park J, Ligrani PM (2005) Numerical predictions of heat transfer and fluid flow characteristics for seven different dimpled surfaces in a channel. Numer Heat Transf Part A Appl 47(3):209–232CrossRefGoogle Scholar
  75. Park KT, Kim HJ, Kim DK (2014) Experimental study of natural convection from vertical cylinders with branched fins. Exp Thermal Fluid Sci 54:29–37CrossRefGoogle Scholar
  76. Perrotin T, Clodie D (2004) Thermal-hydraulic CFD study in louvered fin-and-flat-tube heat exchangers. Int J Refriger 27:422–432CrossRefGoogle Scholar
  77. Popiel CO, Wojtkowiak J, Bober K (2007) Laminar free convective heat transfer from isothermal vertical slender cylinder. Exp Thermal Fluid Sci 32(2007):607–613CrossRefGoogle Scholar
  78. Qiu Y, Tian M, Guo Z (2013) Natural convection and radiation heat transfer of an externally-finned tube vertically placed in a chamber. Heat Mass Transf 49:405–412CrossRefGoogle Scholar
  79. Ramesh N, Venkateshan SP (1997) Optimum finned tubular space radiator. Heat Transf Eng 18:69–87CrossRefGoogle Scholar
  80. Rich DG (1973) The effects of fin spacing on the heat transfer and friction performance of multi-row, smooth plate fin-and-tube heat exchangers. ASHRAE Trans 79(Part 2):137–145Google Scholar
  81. Rich DG (1975) Effect of the number of tube rows on heat transfer performance of smooth plate fin-and-tube heat exchangers. ASHRAE Trans 81(Part 1):307–319Google Scholar
  82. Romero-Méndez R, Sen M, Yang KT, McClain R (2000) Effect of fin spacing on convection in a plate fin and tube heat exchanger. Int J Heat Mass Transf 43(1):39–51CrossRefGoogle Scholar
  83. Rush TA, Newell TA, Jacobi AM (1999) An experimental study of flow and heat transfer in sinusoidal wavy passages. Int J Heat Mass Transf 42(9):1541–1553CrossRefGoogle Scholar
  84. Saad AE, Sayed AE, Mohamed EA, Mohamed MS (1997) Experimental study of turbulent flow inside a circular tube with longitudinal interrupted fins in the streamwise direction. Exp Thermal Fluid Sci 15(1):1–15CrossRefGoogle Scholar
  85. Saboya FEM, Sparrow EM (1974) Local and average transfer coefficients for one-row plate fin and tube heat exchanger configurations. J Heat Transf 96(3):265–272CrossRefGoogle Scholar
  86. Saboya FEM, Sparrow EM (1976) Transfer characteristics of two-row plate fin and tube heat exchanger configurations. Int J Heat Mass Transf 19(1):41–49CrossRefGoogle Scholar
  87. Sajedi R, Taghilou M, Jafari M (2015) Experimental and numerical study on the optimal fin numbering in an external extended finned tube heat exchanger. Appl Therm Eng 83:139–146CrossRefGoogle Scholar
  88. Sarkhi AA, Nada EA (2005) Characteristics of forced convection heat transfer in vertical internally finned tube. Int Commun Heat Mass Transf 32:557–564CrossRefGoogle Scholar
  89. Schmidt TE (1963) Der Warmeiibergang an Rippenrohre and die Berechnung von Rohrbundel-Warmeaustauschern, Kaltetechnik, Band 15, Heft 12Google Scholar
  90. Schnurr NM, Townsend MA, Shapiro AB (1976) Optimization of radiating fin arrays with respect to weight. ASME Trans J Heat Transf 98:643–648CrossRefGoogle Scholar
  91. Seshimo Y, Fujii M (1991) An experimental study on the performance of plate fin and tube heat exchangers at low Reynolds numbers. In: Proceedings of the ASME-JSME thermal engineering joint conference, vol 4, pp 449–454Google Scholar
  92. Sheik Ismail L, Ranganayakulu C, Shah RK (2009) Numerical study of flow patterns of compact plate-fin heat exchangers and generation of design data for offset and wavy fins. Int J Heat Mass Transf 52(17–18):3972–3983CrossRefGoogle Scholar
  93. Sheik Ismail L, Velraj R, Ranganayakulu C (2010) Studies on pumping power in terms of pressure drop and heat transfer characteristics of compact plate-fin heat exchangers—a review. Renew Sust Energ Rev 14(1):478–485CrossRefGoogle Scholar
  94. Sheu TW, Tsai SF (1999) A comparison study on fin surfaces in finned-tube heat exchangers. Int J Numer Methods Heat Fluid Flow 9(1):92–106zbMATHCrossRefGoogle Scholar
  95. Shih TH, Liou WW, Shabbrir A, Yang ZG, Zhu J (1995) A new k–e eddy viscosity model for high Reynolds number turbulent flows. Comput Fluids 24(3):227–238zbMATHCrossRefGoogle Scholar
  96. Sparrow EM, Niethammer JE, Chaboki A (1982) Heat transfer and pressure drop characteristics of arrays of rectangular modules encountered in electronic equipment. Int J Heat Mass Transf 25:961–973CrossRefGoogle Scholar
  97. Sparrow EM, Vemuri SB, Kadle D (1983) Enhanced and local heat transfer, pressure drop, and flow visualization for arrays of block-like electronic components. Int J Heat Mass Transf 26:689–699CrossRefGoogle Scholar
  98. Srinivasan K, Katte SS (2004) Analysis of grooved space radiator. In: Proceedings of the 17th national and 6th ISHMT-ASME heat and mass transfer confence, Kalpakkam, vol 12Google Scholar
  99. Sunden B, Svantesson J (1992) Correlation of j-and f-factors for multilouvered heat transfer surfaces. In: Proc. 3rd UK national conference on heat transfer, pp 805–811Google Scholar
  100. Taghilou M, Ghadimi B, Seyyedvalilu MH (2014) Optimization of double pipe fin pin heat exchanger using entropy generation minimization. IJE Trans C Aspects 27(9):1445–1454Google Scholar
  101. Torii K, Yanagihara JI (1997) A review on heat transfer enhancement by longitudinal vortices. J HTSJ 36(142):73–86Google Scholar
  102. Torikoshi K (1994) Flow and heat transfer performance of a plate-fin and tube heat exchanger. Heat Transf 4:411–416Google Scholar
  103. Turk AY, Junkhan GH (1986) Heat transfer enhancement downstream of vortex generators on a flat plate. In: Tien CL, Carey VP, Ferrell JK (eds) Heat transfer, vol 6. Hemisphere, Washington, pp 2903–2908Google Scholar
  104. Wang C-C, Chi K-Y (2000) Heat transfer and friction characteristics of plain fin-and-tube heat exchangers, part I: new experimental data. Int J Heat Mass Transf 43:2681–2691CrossRefGoogle Scholar
  105. Wang C-C, Chen P-Y, Jang J-Y (1996) Heat transfer and friction characteristics of convex-louver fin-and-tube heat exchangers. Exp Heat Transf 9:61–78CrossRefGoogle Scholar
  106. Wang C-C, Chi K-Y, Chang C-J (2000) Heat transfer and friction characteristics of plain fin-and-tube heat exchangers, part II: correlation. Int J Heat Mass Transf 43:2693–2700CrossRefGoogle Scholar
  107. Wang QW, Lin M, Zeng M (2008a) Effect of blocked core-tube diameter on heat transfer performance of internally finned tubes. Heat Transf Eng 29(1):107–115CrossRefGoogle Scholar
  108. Wang QW, Lin M, Zeng M, Tian L (2008b) Computational analysis of heat transfer and pressure drop performance for internally finned tubes with three different longitudinal wavy fins. Heat Mass Transf 45:147–156CrossRefGoogle Scholar
  109. Wang QW, Lin M, Zeng M, Tian L (2008c) Investigation of turbulent flow and heat transfer in periodic wavy channel of internally finned tube with blocked core tube. ASME J Heat Transf 130(6). Article No.: 061801CrossRefGoogle Scholar
  110. Webb RL, Kim NY (2005) Principles of enhanced heat transfer. Taylor & Francis, New YorkGoogle Scholar
  111. Wilkins JE Jr (1960) Minimizing the mass of thin radiating fins. J Aerospace Sci 27:145–146Google Scholar
  112. Xi GN, Torikoshi K (1996) Computation and visualizationof flow and heat transfer in finned tube heat exchangers. In: International symposium on heat transfer, Tsinhua University, Beijing China (7.10–11.10), pp 632–637Google Scholar
  113. Yan W-M, Sheen P-J (2000) Heat transfer and friction characteristics of finand-tube heat exchangers. Int J Heat Mass Transf 43:1651–1659CrossRefGoogle Scholar
  114. Yang YT, Peng HS (2009) Investigation of planted pin fins for heat transfer enhancement in plate fin heat sink. Microelectron Reliab 49(2):163–169CrossRefGoogle Scholar
  115. Yang Y, Li Y, Si B, Zheng J (2017) Heat transfer performances of cryogenic fluids in offset strip fin-channels considering the effect of fin efficiency. Int J Heat Mass Transf 114:1114–1125CrossRefGoogle Scholar
  116. Yazicioğlu B, Yüncü H (2007) Optimum fin spacing of rectangular fins on a vertical base in free convection heat transfer. Heat Mass Transf 44(1):11–21CrossRefGoogle Scholar
  117. Youn B (1997) Internal report. Samsung Electric CorpGoogle Scholar
  118. Yu B, Tao WQ (2004) Pressure drop and heat transfer characteristics of turbulent flow in annular tubes with internal wave-like longitudinal fins. Heat Mass Transf 40:643–651CrossRefGoogle Scholar
  119. Yu B, Nie JH, Wang QW, Tao WQ (1999) Experimental study on the pressure drop and heat transfer characteristics of tubes with internal wave-like longitudinal fins. Heat Mass Transf 35:65–73CrossRefGoogle Scholar
  120. Yu X, Feng J, Feng Q, Wang Q (2005) Development of a plate-pin fin heat sink and its performance comparisons with a plate fin heat sink. Appl Therm Eng 25(2):173–182CrossRefGoogle Scholar
  121. Zaretabar M, Asadian H, Ganji D (2018) Numerical simulation of heat sink cooling in the mainboard chip of a computer with temperature dependent thermal conductivity. Appl Therm Eng 130:1450–1459CrossRefGoogle Scholar
  122. Zeitoun O, Hegazy AS (2004) Heat transfer for laminar flow in internally finned pipes with different fin heights and uniform wall temperature. Heat Mass Transf 40:253–259CrossRefGoogle Scholar
  123. Zhang J (2005) Numerical simulations of steady low-Reynolds-number flows and enhanced heat transfer in wavy plate-fin passages. Ph.D. thesis, University of CincinnatiGoogle Scholar
  124. Zhang J, Muley A, Borghess JB, Manglik RM (2003) Computational and experimental study of enhanced laminar flow heat transfer in three dimensional sinusoidal wavy-plate-fin channels. In: Proceedings of the 2003 ASME summer heat transfer conference, Nevada, USA, HT2003-47148Google Scholar
  125. Zhang J, Kundu J, Manglik RM (2004) Effect of fin waviness and spacing on the lateral vortex structure and laminar heat transfer in wavy-plate-fin cores. Int J Heat Mass Trans 47:1719–1730CrossRefGoogle Scholar
  126. Zukauskas A (1972) Heat transfer from tubes in crossflow. In: Hartnett JP, Irvine TF (eds) Advances in heat transfer, vol 8. Academic Press, New York, pp 93–160Google Scholar

Copyright information

© The Author(s), under exclusive license to Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Sujoy Kumar Saha
    • 1
  • Hrishiraj Ranjan
    • 1
  • Madhu Sruthi Emani
    • 1
  • Anand Kumar Bharti
    • 1
  1. 1.Mechanical Engineering DepartmentIndian Institute of Engineering, Science and Technology, ShibpurHowrahIndia

Personalised recommendations