Systematic Use of Velocity and Acceleration Coefficients in the Kinematic Analysis of Single-DOF Planar Linkages
In single-degree-of-freedom (DOF) mechanisms, velocity coefficients (VCs) and their 1st derivative with respect to the generalized coordinate (acceleration coefficients (ACs)) only depend on the mechanism configuration. In addition, if the mechanism is a planar linkage, complex numbers are an easy-to-use tool for writing linkage’s loop equations that are formally differentiable. Here, both these results are combined to propose an algorithm that systematically uses VCs and ACs for solving the kinematic-analysis problems of single-DOF planar linkages. The proposed algorithm is efficient enough to be the kinematic block of any dynamic model of these linkages; also, it lends itself to present planar kinematics in graduate and/or undergraduate courses.
KeywordsPlanar Linkage Velocity Coefficient Acceleration Coefficient Higher Education
Unable to display preview. Download preview PDF.
This work has been developed at the Laboratory of Advanced Mechanics (MECH-LAV) of Ferrara Technopole, supported by FAR2018 UNIFE funds and by Regione Emilia Romagna (District Councillorship for Productive Assets, Economic Development, Telematic Plan) POR-FESR 2007-2013, Attività I.1.1
- 1.Paul, B.: Kinematics and Dynamics of Planar Machinary. Prentice-Hall, Inc., Englewood Cliffs N.J. (1987).Google Scholar
- 2.Nikravesh, P.E.: Planar Multibody Dynamics. CRC Press, Boca Raton FL (2018).Google Scholar
- 8.Di Gregorio, R.: An Algorithm for Analytically Calculating the Positions of the Secondary Instant Centers of Indeterminate Linkages. J. Mech. Des 130(4), 042303-(1-9) (2008).Google Scholar
- 9.Di Gregorio, R.: A novel dynamic model for single-degree-of-freedom planar mechanisms based on instant centers. ASME J. of Mechanisms and Robotics 8(1), 011013-(8pages) (2016).Google Scholar
- 10.Di Gregorio, R.: On the Use of Instant Centers to Build Dynamic Models of Single-dof Planar Mechanisms. In: Lenarcic J., Parenti-Castelli V. (eds) Advances in Robot Kinematics 2018. Springer Proceedings in Advanced Robotics, vol 8, pp. 242-249. Springer, Cham (2018).Google Scholar
- 11.IFToMM Commission A: Terminology for the Theory of Machines and Mechanisms. Mech. Mach. Theory 26(5), 435-539 (1991).Google Scholar