Advertisement

Stability of a Flexible Rotor-Bearing System with a Transverse Crack

  • Abed Salam Ahmed
  • Bahrami Mohammad RezaEmail author
  • Thijel Jassim Farij
Conference paper
Part of the Mechanisms and Machine Science book series (Mechan. Machine Science, volume 73)

Abstract

The aim of this paper is to analyze the stability of a Jeffcott rotor with an offset disk rotor system with a crack. The theory of fracture mechanics has been used to simulate a Jeffcott model for rotor shafts with crack with changing the crack depths. The eccentricity ratio has been found from the modified Sommerfeld number with the help of the iteration method using the computer program of MATLAB. The effect of changing speeds on the dynamic parameters of journal bearings (stiffness and damping) and its effect on Sommerfeld number has been investigated. The relation between threshold speed and the Sommerfeld number has been gained. The results have been obtained analytically using MATLAB. The results show that the crack depth up to 0.8R has no effect on the stability. If the crack depth reaches to R-value the unstable region has high increasing while the stable zoon will decrease when the flexibility reduced 40% which will effect on the stability of rotors.

Keywords

Rotor Dynamics Stability of Cracked Rotor Transverse Crack Theory of Fracture Mechanics 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Li, C., Yu, H., Zhou, S., Wen, B.: Simulations and experimental investigation on motion stability of a flexible rotor-bearing system with a transverse crack. Chinese Journal of Mechanical Engineering 26(6), 1194–1203 (2013).CrossRefGoogle Scholar
  2. 2.
    Huang, Z.: Dynamic analysis of a rotor-bearing system with coupling faults of crack and rub-impact. In Journal of Physics: Conference Series, vol. 744(1), p. 012158. IOP Publishing (2016).Google Scholar
  3. 3.
    Sharafi, M., Nikravesh, M., Safarpour, P.: Analytical approach to calculate bending, longi-tudinal and torsional local stiffness of an asymmetric circumferential crack with contact condition. Mechanical Systems and Signal Processing, 94, 448–463 (2017).CrossRefGoogle Scholar
  4. 4.
    Han, Q., & Chu, F.: Parametric instability of a rotor-bearing system with two breathing transverse cracks. European Journal of Mechanics-A/Solids, 36, 180–190 (2012).Google Scholar
  5. 5.
    Han, Q., & Chu, F.: Parametric instability of a Jeffcott rotor with rotationally asymmetric inertia and transverse crack. Nonlinear Dynamics 73(1-2), 827–842 (2013).Google Scholar
  6. 6.
    Peng, H., He, Q., Zhen, Y.: Stability analysis of a breathing cracked rotor with imposed mass eccentricity. Shock and Vibration, (2015).Google Scholar
  7. 7.
    Chauvin Jr, D.: An Experimental Investigation of Whirl Instability Including Effects of Lub-ricant Temperature in Plain Circular Journal Bearings. Louisiana State University Agricul-tural and Mechanical College (2003).Google Scholar
  8. 8.
    Ignacio R., Luis M., Humberto C.: Vibrational Response of a Rotor Supported in Hydrody-namics Short Bearings. Memories Del Xix International Congress of Her Annual Somim, 25-27 September, pp. 1085-1094. PACHUCA, HIDALGO, MEXICO (2013).Google Scholar
  9. 9.
    Abed S., Al Drajy J., Bahrami M.: Numerical investigation of a rotary-bearing system with a single crack using harmonic analysis. St. Petersburg Polytechnic university journal of en-gineering science and technology, 24(03), 139–152 (2018).Google Scholar
  10. 10.
    Rao, X., Chu, Y., Chang, Y., Zhang, J., Tian, Y.: Dynamics of a cracked rotor system with oil-film force in parameter space. Nonlinear Dynamics, 88(4), 2347–2357 (2017).CrossRefGoogle Scholar
  11. 11.
    Friswell, M., Penny, J., Garvey, S., Lees, A.: Dynamics of Rotating Machines. Cambridge University Press, 32 Avenue of the Americas New York NY 10013 (2010).Google Scholar
  12. 12.
    Penny, J., Friswell M.: The Dynamics of Cracked Rotors. IMAC-XXV: A Conference & Exposition on Structural Dynamics, Orlando, FL, February 19-22, 2007, Society for Exper-imental Mechanics, Bethel, CT, paper198 (2007).Google Scholar
  13. 13.
    Nagaraju T., Srinivas K.: Rotor Dynamic Analysis of Steam Turbine Rotor Using ANSYS. International Journal of Mechanical Engineering and Robotics Research (IJMERR), 3(1), 338–349 (2014).Google Scholar
  14. 14.
    Abed S., Bahrami M., Thijel J.: Analytical and Numerical Investigation to the Effect of Two Cracks on the Dynamic Behavior of Rotor-Bearings System. Russian scientific journal Sci-ence and Business: ways of development, 11(89), (2018).Google Scholar
  15. 15.
    Abed S., Bahrami M., Thijel J.: Dynamic Behavior of Rotor-Bearings System with Chang-ing Angle Orientation between Two Cracks. Russian scientific journal Science Prospects, 11(110), (2018).Google Scholar
  16. 16.
    Rao J.S.: History of Rotating Machinery Dynamics. Springer Science + Business Media B.V. (2011).Google Scholar
  17. 17.
    Athanasios, C.: Vibration Analysis of Nonlinear-Dynamic Rotor-Bearing Systems and De-fect Detection. Mechanical Engineering and Aeronautics, University of Patras (2009)Google Scholar
  18. 18.
    Untaroiu, C., Untaroiu, A., Boiangiu, M.: Dynamic Stability Analysis of Periodically Time-Varying Rotor System with a Transverse Crack. Engineering, 3(07), 719–725 (2011).CrossRefGoogle Scholar
  19. 19.
    Luneno, J.: Cases of Coupled Vibrations and Parametric Instability in Rotating Machines. Department of Engineering Sciences and Mathematics Division of Mechanics of Solid Me-chanics, Lulea University of Technology, SE-97187 Sweden (2012).Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Peter the Great St.Petersburg Polytechnic UniversitySt. PetersburgRussia
  2. 2.Innopolis UniversityInnopolisRussia
  3. 3.Midland Refineries Company (Al - Daura Refinery) Ministry of OilBaghdadIraq

Personalised recommendations