Advertisement

Assessment of the time-varying load influence on damping abilities of steel beams filled with composite material

  • Paweł DunajEmail author
  • Marcin Chodźko
  • Tomasz Okulik
  • Stefan Berczyński
  • Bartosz Powałka
Conference paper
Part of the Mechanisms and Machine Science book series (Mechan. Machine Science, volume 73)

Abstract

The damping of steel welded machine tool bodies is usually insufficient in a perspective of functional properties of the machine. Therefore, methods are sought to increase their ability to dissipate energy. One of the solutions is to fill steel welded body with a composite material based on an epoxy resin. Such a structure should maintain its good damping abilities during machine tool lifetime regardless of time-varying loads accompanying cutting process. In the paper an analysis of the time-varying load influence on damping abilities of steel beams filled with composite material is presented. Three beams differing in terms of composition of composite material were subjected to time-varying load and for each four hundred thousand cycles, damping was determined using the half power method. Based on the obtained results, it was found that increase of the number of cycles of time-varying load does not affect the damping properties.

Keywords

machine tool composite material time-varying loads damping 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgments

The presented research was financed from the European Regional Development Fund under the Intelligent Development Programme 2014-2020. Measure “Regional scientific and re-search agendas”. Project “Light vertical lathe” No. POIR.04.01.02-00-0078/16.

References

  1. 1.
    Angus, H.T.: Cast iron: physical and engineering properties. Elsevier, (2013).Google Scholar
  2. 2.
    Bhandari V.B.: Design of machine elements. Tata McGraw-Hill Education, (2010).Google Scholar
  3. 3.
    Smithells C.J. (ed.): Metals reference book. Elsevier, (2013).Google Scholar
  4. 4.
    Cho, S. K., Kim, H. J., & Chang, S. H.: The application of polymer composites to the table-top machine tool components for higher stiffness and reduced weight. Composite Structures, 93(2), 492-501, (2011).Google Scholar
  5. 5.
    Kim, Ju-Ho; Chang, Seung-Hwan.: Design of μ-CNC machining centre with carbon/epoxy composite–aluminum hybrid structures containing friction layers for high damping capacity. Composite Structures, 92(9), 2128-2136, (2010).CrossRefGoogle Scholar
  6. 6.
    Kim, D. I., Jung, S. C., Lee, J. E., & Chang, S. H.: Parametric study on design of composite–foam–resin concrete sandwich structures for precision machine tool structures. Composite Structures, 75(1-4), 408-414, (2006).Google Scholar
  7. 7.
    Kępczak, N.; Pawłowski, W.: Theoretical research of dynamic properties of machine tool bodies made of cast iron and hybrid connection of cast iron and mineral cast in Polish. Mechanik, 88(8-9), 199—203, (2015).Google Scholar
  8. 8.
    Kosmol, J.: Design of hybrid machine tool frames in Polish. Mechanik, 89(8-9), 904-913, (2016).Google Scholar
  9. 9.
    Lee, C. S., Oh, J. H., & Choi, J. H.: A composite cantilever arm for guiding a moving wire in an electrical discharge wire cutting machine. Journal of Materials Processing Technology, 113(1-3), 172-177, (2001).Google Scholar
  10. 10.
    Okulik, T., Powałka, B., Marchelek, K., & Byrczek, G.: Numerical modal analysis of milling machine body made with filled steel profiles in Polish, Modelowanie Inżynierskie, 33(64),69-73, (2017).Google Scholar
  11. 11.
    Berczyński, S., Wróblewski, T.: Vibration of steel–concrete composite beams using the Ti-moshenko beam model. Modal Analysis, 11(6), 829-848, (2005).CrossRefGoogle Scholar
  12. 12.
    Berczyński, S., & Wróblewski, T.: Experimental verification of natural vibration models of steel-concrete composite beams. Journal of Vibration and Control, 16(14), 2057-2081, (2010).Google Scholar
  13. 13.
    Wróblewski, T., Pełka-Sawenko, A., Abramowicz, M., & Berczyński, S. Modeling and anal-ysis of free vibration of steel-concrete composite beams by finite element method. Advances in manufacturing science and technology, 36(4), 85-96, (2012).Google Scholar
  14. 14.
    Dunaj, P., Powałka, B., Okulik, T., Berczyński, S., & Chodźko, M. Modelling Steel Beams Filled With a Composite Material. Journal of Machine Construction and Maintenance. Prob-lemy Eksploatacji, 2018Google Scholar
  15. 15.
    Dunaj, P., Michał D., and Berczyński S.: Model Order Reduction Adapted to Steel Beams Filled with a Composite Material. International Conference on Information Systems Archi-tecture and Technology. Springer, Cham, 2018.Google Scholar
  16. 16.
    Liu, R., Yang, Y., & Zhou, X.: Experimental study on fatigue performance of composite beam with steel-plate-concrete composite decks. Construction and Building Materials, 188, 833-849, (2018).Google Scholar
  17. 17.
    Jia, Haoling, et al. Fatigue and fracture behavior of bulk metallic glasses and their compo-sites. Progress in Materials Science (2018).Google Scholar
  18. 18.
    Kwak, K. H., & Kim, J. J.: Fatigue strength in polymer-reinforced concrete beams under cyclic loading. Nuclear engineering and design, 156(1-2), 63-73, (1995).Google Scholar
  19. 19.
    Ríos, J. D., Cifuentes, H., Yu, R. C., & Ruiz, G: Probabilistic flexural fatigue in plain and fiber-reinforced concrete. Materials, 10(7), 767, (2017).Google Scholar
  20. 20.
    Bedi, Raman, S. P. Singh, and Rakesh Chandra. Flexural fatigue-life assessment and strength prediction of glass fibre reinforced polymer concrete composites. ISRN Materials Science 2014 (2014).CrossRefGoogle Scholar
  21. 21.
    Ateş, E., & Gerger, M. N.: Usability of Polymer Concrete as a Machine-Making Material Regarding Fatigue Strength. World Journal of Engineering and Technology, 1(03), 59, (2013).Google Scholar
  22. 22.
    Zhang, Z., & Hartwig, G.: Relation of damping and fatigue damage of unidirectional fibre composites. International journal of fatigue, 24(7), 713-718, (2002).Google Scholar
  23. 23.
    Kabir, A.: Vibration damping property and flexural fatigue behavior of glass/epoxy/nanoclay composites (Doctoral dissertation, Concordia University), (2010).Google Scholar
  24. 24.
    Adden, S., Pfleiderer, K., Solodov, I., Horst, P., & Busse, G.: Characterization of stiffness degradation caused by fatigue damage in textile composites using circumferential plate acoustic waves. Composites Science and Technology, 68(7-8), 1616-1623, (2008).Google Scholar
  25. 25.
    Vieira, P. R., Carvalho, E. M. L., Vieira, J. D., & Toledo Filho, R. D. (2018). Experimental fatigue behavior of pultruded glass fibre reinforced polymer composite materials. Compo-sites Part B: Engineering, 146, 69-75.Google Scholar
  26. 26.
    Schaller, R.: Metal matrix composites, a smart choice for high damping materials. Journal of Alloys and Compounds, 355(1-2), 131-135, (2003).CrossRefGoogle Scholar
  27. 27.
    Chodźko M., Pajor M.: Static and dynamic Properties Examination of R1000 Milling Ma-chine Prototype. Advances in Manufacturing Science and Technology, 40(4), 5-13, (2016).Google Scholar
  28. 28.
    Chodźko M.: The Search for Weak Elements Affecting the Vibrostability of the System Consisting of the Machine Tool and the Cutting Process, Based on Symptoms Observed During Operation. Maintenance Problems, 1, 5-23, (2015).Google Scholar
  29. 29.
    Chodźko M.: Application of modal analysis methods in methods in experimental investigations of machine tool dymanics in Polish. Wydawnictwo Zapol, Poland, (2012).Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Paweł Dunaj
    • 1
    Email author
  • Marcin Chodźko
    • 1
  • Tomasz Okulik
    • 1
  • Stefan Berczyński
    • 1
  • Bartosz Powałka
    • 1
  1. 1.West Pomeranian University of Technology SzczecinSzczecinPoland

Personalised recommendations