Advertisement

Experimental set-up for the investigation of transmissions effects on the dynamic performances of a linear PKM

  • Paolo RighettiniEmail author
  • Roberto Strada
  • Bruno Zappa
  • Vittorio Lorenzi
Conference paper
Part of the Mechanisms and Machine Science book series (Mechan. Machine Science, volume 73)

Abstract

The parallel kinematics robots exhibit a typical dynamic feature arising from their peculiar kinematic configuration. Thanks to these characteristics, parallel kinematic robots are suitable both for high dynamics applications and when high stiffness is required. When, according to the application, the key-point is dynamic performance, transmissions with low inertia should be used. Moreover, the overall performances of the system depend not only on the kinematic structure of the manipulator but also on transmission system; hence, in order to get the expected system’s performances, the synthesis requires a synergic design approach. This paper deals with the set-up of a Linear Delta Robot, designed and built by the Mechatronics and Mechanical Dynamics Lab. of the University of Bergamo, with sensors both on the joints and on the end-effector, in order to investigate the influence of the transmissions on the dynamic performances of a inear delta manipulator.

Keywords

Linear PKM mechanical transmissions timing belts 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    R. Clavel: Delta, a fast robot with parallel geometry, Proceedings of the 1988 IEEE International Symposium on Industrial Robot, pp. 91-100, April 1988.Google Scholar
  2. 2.
    Rey L., Clavel R.: The Delta Parallel Robot. In: Bor C.R., Molinari-Tosatti L., Smith K.S. (eds) Parallel Kinematic Machines. Advanced Manufacturing. Springer, London, 1999.CrossRefGoogle Scholar
  3. 3.
    Bouri M., Clavel R.: The Linear Delta: Developments and Applications, Proceedings for the joint conference of ISR 2010 (41st Internationel Symposium on Robotics) und ROBOTIK 2010 (6th German Conference on Robotics), 7-9 June 2010, Munich, GermanyGoogle Scholar
  4. 4.
    Merlet, J.P.: Parallel Robots. Kluwer Academic Publishers, 2000.Google Scholar
  5. 5.
    Parallel Kinematic Machines: Theoretical Aspects and Industrial Requirements, C. R. Bor, L. Molinari-Tosatti, and K.S. Smith (Eds), Springer-Verlag, 1999.Google Scholar
  6. 6.
    P. Righettini, V. Lorenzi, B. Zappa, A. Ginammi and R. Strada: Design and optimization of a PKM for micromanipulation, Applied Mechanics and Materials Vols. 799-800 (2015) pp 1088-1095.Google Scholar
  7. 7.
    Yangmin Li, Qingsong Xu: Stiffness analysis for a 3-PUU parallel kinematic machine, Mechanism and Machine Theory 43 (2008) 186200.CrossRefGoogle Scholar
  8. 8.
    Dongsheng Zhang, Yundou Xu, Jiantao Yao, Bo Hu, Yongsheng Zhao: Kinematics, dynamics and stiffness analysis of a novel 3-DOFkinematically/actuation redundant planar parallel mechanism, Mechanism and Machine Theory 116 (2017) 203219.CrossRefGoogle Scholar
  9. 9.
    Amir Rezaei, Alireza Akbarzadeh: Influence of joints flexibility on overall stiffness of a 3- P RUP compliant parallel manipulator, Mechanism and Machine Theory 126 (2018) 108140.CrossRefGoogle Scholar
  10. 10.
    Tao Sun, Binbin Lian: Stiffness and mass optimization of parallel kinematic machine, Mechanism and Machine Theory 120 (2018) 7388.Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Paolo Righettini
    • 1
    Email author
  • Roberto Strada
    • 1
  • Bruno Zappa
    • 1
  • Vittorio Lorenzi
    • 1
  1. 1.Department of Engineering and Applied SciencesUniversity of BergamoDalmineItaly

Personalised recommendations