Advertisement

Experimental Investigation of Mechanical Properties and Bio-compatibility of Glass Fiber Reinforced Polymer Composite as Bio-implant

  • Rahul Dhabale
  • Vinaykumar S. Jatti
  • Savita Jatti
  • Vijaykumar S. Jatti
  • Rachit Roshan
Conference paper

Abstract

In this study glass fibers reinforced polymer was synthesized as an implantable biomaterial because of its superior properties such as low weight, high specific strength, and low cost, reasonably good mechanical properties, non-abrasive. In this research work, two grades of glass fiber reinforced samples having 350 and 660 GSM (gram per square meter) size respectively were synthesized using hand-layup process. Subsequently, mechanical properties in terms of tensile, flexural, hardness and impact strength of synthesized glass fiber reinforced polymer samples were evaluated and compared with bone strength. SEM shows a glass fiber sheet and resin shows void less bonding therefore less chances of fracture. Both type of glass fiber sheet reinforced plastic also shows comparatively better strength than femur bone.

Keywords

Biomaterial Glass fiber reinforced plastic Hand layup process Bone strength 

References

  1. 1.
    Kumar TPS, Kumar S, Naveen J (2014) Glass fiber-reinforced polymer composites -a review. J Reinf Plast Compos 33(13):1258–1275CrossRefGoogle Scholar
  2. 2.
    Malcom AJ, Aronson MT, Wadley HNG (2015) Three-dimensionally woven glass fiber composite struts: characterization and mechanical response in tension and compression. J Compos Mater 1–19Google Scholar
  3. 3.
    Agarwal A, Garg S, Rakesh PK, Singh I, Mishra BK (2010) Tensile behaviour of glass fiber reinforced plastics subjected to different environmental conditions. Indian J Engg Mater Sci 17:471–476Google Scholar
  4. 4.
    Naveen J, Kumar TPS, Kumar SS (2014) Effect of moisture absorption on the tensile behavior of woven hybrid natural fiber reinforced polymer composites. Int J Innov Res Sci Engg Techn 3:1091–1095Google Scholar
  5. 5.
    Sanjay MR, Yogesha B (2016) Studies on mechanical properties of jute/E-glass fiber reinforced epoxy hybrid composites. J Miner Mater Charact Eng 4:15–25Google Scholar
  6. 6.
    Alagarraja K, Dhamodharan A, Gopinathan K, Raj RM, Kumar KR (2014) Fabrication and testing of fibre reinforced polymer composites material. J Mech Civil Engg 3:27–34Google Scholar
  7. 7.
    Suharty NS, Ismail H, Diharjo K, Handayani DS, Firdausa M (2016) Effect of Kenaf fiber as a reinforcement on the tensile, flexural strength and impact toughness properties of recycled polypropylene/Halloysite composites. Procedia Chem 19:253–258CrossRefGoogle Scholar
  8. 8.
    Gopichander N, Kumarai KVH, Vasanthakumar M (2015) Effect of polyester fiber reinforcement on the mechanical properties of interim fixed partial dentures. Saudi Dental J 27:194–200CrossRefGoogle Scholar
  9. 9.
    JHS A Jr, Angrizani CC, Botelho EC, Amico SC (2015) Effect of fiber orientation on the shear behavior of glass fiber/epoxy composites. Mater Design 65:789–795CrossRefGoogle Scholar
  10. 10.
    Betanzos FB, Gimeno-Fabra M, Segal J, Grant D, Ahmed I (2016) Cyclic pressure on compression-moulded bio-resorbable phosphate glass fibre reinforced composites. Mater Design 100:141–150CrossRefGoogle Scholar
  11. 11.
    Wang L, Tomli NA, Pandita SD, Gupta BD, Malik SA, Hudson M, Curtis PT, Fernando GF (2016) In-situ monitoring of cross-linking reactions using E-glass fibres and evanescent wave spectroscopy. Sensors Actuators B Chem 236:358–366CrossRefGoogle Scholar
  12. 12.
    Bruggi M, Taliercio A (2013) Topology optimization of the Fiber-reinforcement retrofitting existing structures. Int J Solids Struct 50(1):121–136CrossRefGoogle Scholar
  13. 13.
    Arun KV, Jadhav KK (2016) Behaviour of human femur bone under bending and impact loads. Eur J Clin Biomed Sci 2(2):6–13Google Scholar
  14. 14.
    Jagadish SP, Dinesh KR, Sreenivasa N, Gouda AT, Prashanth N, Neeta PN (2015) Investigation of mechanical properties of bi-directional hybrid natural fiber-sisal banana jute hemp polymer composite materials used as orthopaedic implants. Int J Mech Product Engg 2320–2092Google Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Rahul Dhabale
    • 1
  • Vinaykumar S. Jatti
    • 1
  • Savita Jatti
    • 2
  • Vijaykumar S. Jatti
    • 2
  • Rachit Roshan
    • 2
  1. 1.Symbiosis Institute of TechnologySymbiosis International (Deemed University)PuneIndia
  2. 2.D Y Patil College of EngineeringSavitribai Phule Pune UniversityPuneIndia

Personalised recommendations