Advertisement

Experimental Investigation and Fatigue Analysis of Primary Suspension Spring of Railway Bogies: A Review

  • Prashant A. Dhaware
  • G. Arunkumar
Conference paper

Abstract

The aim of this research is to identify the problem occurred in the middle axle primary innerspring and to investigate by using design and analysis techniques. The main aim is to determine the cause of frequent failure of the spring. This research is an opportunity to apply a FEM tool to an existing real-world problem of component failure. The standard CAE tool shall be explored for modeling and analysis giving on job experience of handling a realistic problem using most used FEA tool. It has been observed that the stress may be imitated inside the spring of the coil due to curvature effect and manufacturing defect also the lateral and longitudinal load due to curvature and tracking of the rail vehicle. This study has a specific scope to identify the reasons for failure if they are due to design incompetence. It has been found that the middle axle primary inner spring of WAG-9 Railway Engine has the history of frequent random failures. The study aims at making the static and dynamic stress analysis as well as fatigue analysis of the spring under investigation by analytical, experimental and FE analysis.

Keywords

Helical spring Primary suspension system Stress analysis Finite element analysis Modal analysis Vertical excitation 

References

  1. 1.
    Zaazaa KE, Shabana AA (2004) Study of the lateral stability of railroad vehicle systems using the elastic contact approach. Arabian J Sci Eng 29(1C):1–10Google Scholar
  2. 2.
    Zaazaa KE, Shabana AA (2014) Study of the lateral stability of railroad vehicle systems using the elastic contact approach. Arabian J Sci Eng 29(1C):3–12Google Scholar
  3. 3.
    Barney D, Haley D, Nikandros G (2001) Calculating train braking distance. Conferences in research and practice in information technology, vol. 3. P Lindsay (ed)Google Scholar
  4. 4.
    Nishimura K, Terumichi Y, Morimura T, Sogabe K (2009) Development of vehicle dynamics simulation for safety analyses of rail vehicles on excited tracks. J Comput Nonlinear Dyn 4(1):011001CrossRefGoogle Scholar
  5. 5.
    Prawoto Y, Ikeda M, Manville SK, Nishikawa A (2008) Failure analysis of automotive suspension coil spring. September, pp 35–48Google Scholar
  6. 6.
    Maalawi KY, Badr MA (2009) Design optimization of mechanical elements and structures: a review with application. J Appl Sci Res 5(2):221–231Google Scholar
  7. 7.
    Wickent H (2003) Fundamentals of rail vehicle dynamics. Swets & Zeitlinger Publishers, Lisse, pp 1–15CrossRefGoogle Scholar
  8. 8.
    Dy.CEE/Design Indian railways driver’s manuals for WAG-9 Ident. No. 3EHW411116 Ver-1 1-15 IndiaGoogle Scholar
  9. 9.
    Sood VB (2009) Curves for railway. Indian Institute of Civil Engineering, Pune, pp 1–20Google Scholar
  10. 10.
    Watanabe K, Yamamoto H, Ito Y, Isobe H Simplified stress calculation method for helical spring.Google Scholar
  11. 11.
    Dumitriu M Influence of the longitudinal and lateral suspension damping on the vibration behavior in the railway vehicles. Arch Mech Eng 62(1):115–140CrossRefGoogle Scholar
  12. 12.
    Dropa MG, Bosco R Jr (2010) Fatigue analysis of helical suspension springs of reciprocating compressors. International compressor engineering conference at Purdue, paper 1989, July 12–15Google Scholar
  13. 13.
    Ayadi S, Hadj Taieb E (2008) Finite element solution of dynamic response of helical spring. Int J Simul Model 7(1):17–28CrossRefGoogle Scholar
  14. 14.
    Kumbhalkar MA, Yenarkar YL, Grover AK (2011) Failure analysis of inner suspension spring of railway engine: a case study. AMAE, doi: 02.ARMED.2011.01.22Google Scholar
  15. 15.
    de Aguiar RAA, Pereira JHI, de Souza CG, Pacheco PMCL, Savi MA (2009) Shape memory alloy helical springs: modeling, simulation, and experimental analysis. In: da Costa Mattos HS, Alves M (eds) Mechanics of solids in Brazil. Brazilian Society of Mechanical Sciences and Engineering. isbn:978-85-85769-43-7Google Scholar
  16. 16.
    Evans J, Iwnicki SD (2002) Vehicle dynamics and the wheel/rail interface. The Rail Technology Unit, Manchester Metropolitan University, UK, AprilGoogle Scholar
  17. 17.
    Kumbhalkar MA, Bhope DV, Vanalkar AV (2015) Material and stress analysis of railroad vehicle suspension: a failure investigation. In: 2nd international conference on nanomaterials and technologies (CNT 2014), Procedia Material Science, vol 10. Elsevier, pp 331–343Google Scholar
  18. 18.
    Guler D, Yardimoglu B (2006) Dynamic analysis of double wishbone suspension. Izmir Institute of Technology, IzmirGoogle Scholar
  19. 19.
    Uzzal RUA, Ahmed W, Rakheja S (2008) Dynamic analysis of railway vehicle-track interactions due to wheel flat with a pitch-plane vehicle model. J Mech Eng 39(2):86–94CrossRefGoogle Scholar
  20. 20.
    Kumaran G, Menon D, Krishnan Nair K (2003) Dynamic studies of railtrack sleepers in a track structure system. J Sound Vib 268:485–501CrossRefGoogle Scholar
  21. 21.
    Shigley JE, Mischke CR (2008) A textbook of mechanical engineering design. Tata McGraw Hill, New York, pp 502–526Google Scholar
  22. 22.
    Orvnas A (2010) Method of reducing vertical carbody vibrations of a rail vehicle. Report in Railway Technology SwedenGoogle Scholar
  23. 23.
    Sekulić D, Dedović V (2011) The effect of stiffness and damping of the suspension system elements on the optimization of the vibrational behaviour of a bus. Int J Traffic Transport Eng 1(4):231–244Google Scholar
  24. 24.
    Michaleka T, Zelenka J (2011) Reduction of lateral forces between the railway vehicle and the track in small-radius curves by means of active elements. Appl Comput Mech 5:187–196Google Scholar
  25. 25.
    Guo KH (1983) Statistical analysis of vehicle vibration and dynamic load and selection of suspension design parameter. Changchun Motor Vehicle Research Institute, Report No. UM-MEAN82-15, China, MarchGoogle Scholar
  26. 26.
    Hasan MT, Kumar S, Kumar JJ, Pandey A (2016) Theoretical analysis of train bogie suspension system. IJARIIE 2(2). ISSN (O) -2395-4396Google Scholar
  27. 27.
    Chandrasekaran P, Alagu Murugan S, Arunkumar P, Jagan S (2016) Failure investigation of a freight locomotive suspension spring and redesign of the spring for durability and ride index. International conference on systems, science, control, communication, engineering, and technology 2016 [ICSSCCET 2016]Google Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Prashant A. Dhaware
    • 1
  • G. Arunkumar
    • 1
  1. 1.Sathyabama Institute of Science and TechnologyChennaiIndia

Personalised recommendations