Advertisement

Collection of Essential Methods Among the Beams Analysis as an Introduction into the Dynamic Reverse Task Solution of Bending Vibration within Mechatronic System

  • Andrzej BuchaczEmail author
Conference paper
Part of the Advances in Intelligent Systems and Computing book series (AISC, volume 934)

Abstract

Purpose of this paper is analysis of vibrating beam by the exact and approximate methods and creating the hypergraphs of the beam in case of two methods of analysis. Approach was to nominate the relevance or irrelevance between the characteristics obtained by considered methods – especially concerning the relevance of the natural frequencies-poles of characteristics of beam. The main subject of the research is the continuous free beam as a subsystem of vibrating beam-system with constant cross sections. Findings this approach is fact, that approximate solutions fulfill all conditions for vibrating beams and can be introduction to synthesis of these systems modeled by hypergraphs. Research limitation is that linear continuous transverse vibrating free beam is considered. Practical implications of this study is the main point is the introduction to synthesis of transverse vibrating continuous beam-systems. Originality of this approach relies on application approximate methods of analysis of beam and modeling the one of transformed hypergraphs.

Keywords

Dynamical flexibility Mechanical or mechatronic complex systems Exact and approximate methods of analysis 

Notes

Acknowledgement

This work has been conducted as a part of research project PBS3/B6/37/2015 (PST-41/RMT2/2015) from 2015 until 2018.

References

  1. 1.
    Bellert, S., Woźniacki, H.: The Analysis and Synthesis of Electrical Systems by Means of the Method of Structural Numbers. WNT, Warszawa (1968). (in Polish)Google Scholar
  2. 2.
    Berge, C.: Graphs and Hypergraphs. American Elsevier Publishing Co., Inc./North Holland Publishing Co., New York/Amsterdam (1973)zbMATHGoogle Scholar
  3. 3.
    Białas, K., Buchacz, A., Dzitkowski, T.: Synthesis of active mechanical systems with dumping in view of polar graphs and structural numbers. Silesian University of Technology Press, Gliwice (2009). (in Polish) Monograph No. 230Google Scholar
  4. 4.
    Buchacz, A.: Modelling, synthesis and analysis of bar systems characterized by a cascade structure represented by graphs. Mech. Mach. Theory 30(7), 969–986 (1995)CrossRefGoogle Scholar
  5. 5.
    Buchacz, A.: The synthesis of vibrating bar-systems represented by graph and structural numbers. Sci. Lett. Silesian Univ. Technol., Mech 104 (1991). (in Polish) Silesian University of Technology PressGoogle Scholar
  6. 6.
    Buchacz, A., Dymarek, A., Dzitkowski, T.: Design and Examining of Sensitivity of Continuous and Discrete-Continuous Mechanical Systems with Required Frequency Spectrum Represented By Graphs and Structural Numbers. Silesian University of Technology Press, Gliwice (2005). (in Polish) Monograph No. 88Google Scholar
  7. 7.
    Buchacz, A.: The expansion of the synthesized structures of mechanical discrete systems represented by polar graphs. J. Mater. Process. Technol. 164–165, 1277–1280 (2005). Complete ElsevierCrossRefGoogle Scholar
  8. 8.
    Buchacz, A., Żurek, K.: Reverse Task of Dynamic of Active Mechanical Systems by Means the Graphs and Structural Numbers Methods. Silesian University of Technology Press, Gliwice (2005). (in Polish). Monograph No 81Google Scholar
  9. 9.
    Buchacz, A.: Exact and approximate analysis of mechanical and mechatronic systems. J. Achieve. Mater. Manuf. Eng. 33(1), 47–52 (2009)Google Scholar
  10. 10.
    Buchacz, A.: Modelling, synthesis, modification, sensitivity and analysis of mechanic and mechatronic systems. J. Achieve. Mater. Manuf. Eng. 24(1), 198–207 (2007). International OCOSCO World PressGoogle Scholar
  11. 11.
    Buchacz, A.: Dynamical flexibility of discrete-continuous vibrating mechatronic system. J. Achieve. Mater. Manuf. Eng. 28(2), 159–166 (2008). International OCOSCO World PressGoogle Scholar
  12. 12.
    Buchacz, A.: Transformations of hypergraphs of beams as models in synthesis of flexibly vibrating continuous mechanical systems, pp. 35–38. Vestnik Krymskoy Akademii Nauk – Sevastopolskie otdelenie. Release 1, Sevastopol (2010)Google Scholar
  13. 13.
    Buchacz, A.: Orthogonalization method of analysis of mechanical and mechatronic systems. In: Les Problèmes Du Technoshère Et De La Formation Des Cadres D’ingénieurs Contemporains, Recueil des exposés des participants du III Séminaire international scientifique et méthodique, Novembre 2009 à Sousse (Tunisie), Donetsk, pp. 85–88 (2009)Google Scholar
  14. 14.
    Buchacz, A.: Comparison of characteristics of subsystems and systems as introduction to synthesis of torsionally vibrating mechatronic systems. In: Les Problèmes Du Techno- Shère Et De La Formation Des Cadres D’ingénieurs Contemporains. Recueil des exposés des participants du IV Séminaire International scientifique et méthodique, Novembre 2010 à Hammamet (Tunisie), Donetsk, pp. 85–88 (2010)Google Scholar
  15. 15.
    Buchacz, A.: The supply of formal notions to synthesis of the vibrating discrete-continuous mechatronic systems. J. Achieve. Mater. Manuf. Eng. 44(2), 168–178 (2011). International OCOSCO World PressGoogle Scholar
  16. 16.
    Callahan, J., Baruh, H.: Vibration monitoring of cylindrical shells using piezoelectric sensors. Finite Elem. Anal. Des. 23, 303–318 (1996)CrossRefGoogle Scholar
  17. 17.
    Kurnik, W.: Damping of mechanical vibrations utilizing shunted piezoelements. Mach. Dyn. Probl. 28(4), 15–26 (2004)Google Scholar
  18. 18.
    Lu, P., Lee, K.H., Lim, S.P.: Dynamical analysis of a cylindrical piezoelectric transducer. J. Sound Vib. 259(2), 427–443 (2003)CrossRefGoogle Scholar
  19. 19.
    Wojnarowski, J., Buchacz, A.: Use of Hypergraphs and complete structural numbers in the analysis of vibrating beam systems with non-linearly changing cross-sections. Vibr. Eng. 3(4), 593–598 (1989). Hemisphere Publishing Corp.Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Institute of Engineering Processes Automation and Integrated Manufacturing SystemsSilesian University of TechnologyGliwicePoland

Personalised recommendations