Advertisement

Advantages of Using Industrial Sensor Interfaces at the Machine Design Stage

  • Piotr MichalskiEmail author
Conference paper
Part of the Advances in Intelligent Systems and Computing book series (AISC, volume 934)

Abstract

Capabilities of modern automation systems, especially in the field of industrial networks applications, encourage us to favor them during the process of developing the automation project at machine design stage. Extensive network topologies and simplicity as well as clear structure cause displacement of the classic wiring. This approach simplifies the maximum number of components by means of industrial automation from sensor to PLC. Instead of: multi-core cables, intermediate boxes, connectors, terminals or hundreds of cable descriptions, automation systems integrator chooses increasingly clear industrial network bus. A perfect example is the comparison of classical topology and wiring distribution automation equipment in relation to a modern industrial network topology of the AS-interface and IO-Link. Topology simplification is not the only benefit that we get through the selection of industrial networks. Built control systems must often provide the required level of safety. Thus, the designer of the automation system is required to enable the handling of so-called safe I/O modules, safety light curtains, emergency stop buttons, pull-wire switches, etc.

Keywords

Industrial sensors IO-Link Industry 4.0 Machine design 

References

  1. 1.
    IO-Link Community: IO-Link Interface and System. System Specification V1.1.2 (2013)Google Scholar
  2. 2.
    IO-Link Community: IO-Link Safety System Extension with SMI V1.1 (2017)Google Scholar
  3. 3.
    Jahim, M.: From sensor to the SAP - an MES-dream? Industry 4.0 and IO-Link. In: 14th Branch Meeting of Measurement and Automation Technology - Automation (2013)Google Scholar
  4. 4.
    Kamp, P.: IO-Link integration of IO-Link capable devices into control systems. In: 12th Branch Meeting of the Measurement and Automation Technology – Automation (2011)Google Scholar
  5. 5.
    Michalski, P., Hetmanczyk, M.P.: Implementation of the safety component base on industrial networks. Modern Technologies in Industrial Engineering, Modtech 2015. Book Series: IOP Conference Series – Materials Science and Engineering, vol. 95 (2015)Google Scholar
  6. 6.
    Stripf, W.: IO-Link (single-drop digital communication system) for sensors and actuators. In: Industrial Communication Technology Handbook, 2nd ed. (2015)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Institute of Engineering Processes Automation and Integrated Manufacturing SystemsSilesian University of TechnologyGliwicePoland

Personalised recommendations