Advertisement

Height of the Countermovement Vertical Jump Determined Based on the Measurements Coming from the Motion Capture System

  • Jakub Krzysztof GrabskiEmail author
  • Tomasz Walczak
  • Martyna Michałowska
  • Marta Szczetyńska
  • Patrycja Pastusiak
Conference paper
Part of the Advances in Intelligent Systems and Computing book series (AISC, volume 925)

Abstract

A simple and common method for assessing the jumping ability is determination of the jump height during the vertical countermovement jump. However there are different techniques of measurements in biomechanics, e.g. using force plates or accelerometers. In this study the center of jumper’s body is determined based on the motion capture system measurements and Clauser or Zatziorsky formulas. Then the jump height can be obtained in a simple way determining the take-off instant and the peak position instant. In such a case the flight height can be defined as a difference between the position of the center of jumper’s body at these two instants. The results are compared with the jump height obtained based on the force plates measurements, after double integration of the motion equation.

Keywords

Vertical jump Countermovement jump Flight height Motion capture system 

Notes

Acknowledgements

The work was supported by the grant 02/21/DSPB/3513 funded by the Ministry of Higher Education, Poland. During the realization of this work Dr. Jakub K. Grabski was supported with scholarship funded by the Foundation for Polish Science (FNP).

References

  1. 1.
    Payton, C.J., Bartlett, R.M. (eds.): Biomechanical Evaluation of Movement in Sport and Exercise. Routledge, London, New York (2008)Google Scholar
  2. 2.
    Cross, R.: Standing, walking, running and jumping on a force plate. Am. J. Phys. 67, 304–309 (1999)CrossRefGoogle Scholar
  3. 3.
    Grabski, J.K., Walczak, T., Michałowska, M., Cieślak, M.: Gender recognition using artificial neural networks and data coming from force plates. In: Gzik, M., et al. (eds.) Innovations in Biomedical Engineering, IIBE 2017. Advances in Intelligent Systems and Computing, vol. 623, pp. 53–60. Springer, Cham (2018)Google Scholar
  4. 4.
    Walczak, T., Grabski, J.K., Grajewska, M., Michałowska, M.: The recognition of human by the dynamic determinants of the gait with use of ANN. In: Awrejcewicz, J. (ed.) Dynamical Systems: Modelling. Springer Proceedings in Mathematics and Statistics, vol. 181, pp. 375–385. Springer, Cham (2016)Google Scholar
  5. 5.
    Merletti, R., Parker, P. (eds.): Electromyography. Physiology, Engineering and Noninvasive Applications. Wiley, Hoboken (2004)Google Scholar
  6. 6.
    Grabski, J.K., Kazimierczuk, S., Walczak, T.: Analysis of the electromyographic signal during rehabilitation exercises of the knee joint. Vibr. Phys. Syst. 26, 79–86 (2014)Google Scholar
  7. 7.
    Nathan, R.H.: A dynamometer for biomechanical use. J. Biomed. Eng. 1(2), 83–88 (1979)CrossRefGoogle Scholar
  8. 8.
    Grygorowicz, M., Michałowska, M., Walczak, T., Owen, A., Grabski, J.K., Pyda, A., Piontek, T., Kotwicki, T.: Discussion about different cut-off values of conventional hamstring-to-quadriceps ratio used in hamstring injury prediction among professional male football players. PLoS ONE 12(2), e0188974 (2017)CrossRefGoogle Scholar
  9. 9.
    Corazza, S., Mündermann, L., Chaudhari, A.M., Demattio, T., Cobelli, C., Andriacchi, T.P.: A markerless motion capture system to study musculoskeletal biomechanics: visual hull and simulated annealing approach. Ann. Biomed. Eng. 34, 1019–1029 (2006)CrossRefGoogle Scholar
  10. 10.
    Walczak, T., Grabski, J.K., Grajewska, M., Michałowska, M.: Application of artificial neural networks in man’s gait recognition. In: Kleiber, M., et al. (eds.) Advances in Mechanics: Theoretical, Computational and Interdisciplinary Issues. Proceedings of the 3rd Polish Congress of Mechanics (PCM) and 21st International Conference on Computer Methods in Mechanics (CMM), pp. 591–594. CRC Press, Taylor & Francis Group, London (2016)CrossRefGoogle Scholar
  11. 11.
    Grabski, J.K., Walczak, T., Michałowska, M., Pastusiak, P., Szczetyńska, M.: On different methods for calculating the flight height in the vertical countermovement jump analysis. In: Arkusz, K., et al. (eds.) Biomechanics in Medicine and Biology, BIOMECHANICS 2018. Advances in Intelligent Systems and Computing, vol. 831, pp. 242–251. Springer, Cham (2019)Google Scholar
  12. 12.
    Clauser, C.E., McConville, J.T., Young, J.W.: Weight, volume and center of mass of segments of the human body. AMRL Technical report 69-70. Wright Patterson Air Force Base, Ohio (NTIS No. AD-710-622.) (1969)Google Scholar
  13. 13.
    Zatsiorsky, V.M., Seluyanov, V.N., Chugunova, L.G.: Methods of determining mass-inertial characteristics of human body segments. In: Chemyi, G.G., Regirer, S.A. (eds.) Contemporary Problems of Biomechanics, pp. 272–291. CRC Press, Massachusetts (1990)Google Scholar
  14. 14.
    Tejszerska, D., Świtoński, E. (eds.): Biomechanika inżynierska. Zagadnienia wybrane. Laboratorium, Gliwice (2004). (in Polish)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Jakub Krzysztof Grabski
    • 1
    Email author
  • Tomasz Walczak
    • 1
  • Martyna Michałowska
    • 1
  • Marta Szczetyńska
    • 1
  • Patrycja Pastusiak
    • 1
  1. 1.Institute of Applied Mechanics, Faculty of Mechanical Engineering and ManagementPoznan University of TechnologyPoznańPoland

Personalised recommendations