Advertisement

A MIMO Robust Servo Controller Design Method for Omnidirectional Automated Guided Vehicles Using Polynomial Differential Operator

  • Van Lanh Nguyen
  • Sung Won Kim
  • Choong Hwan Lee
  • Dae Hwan Kim
  • Hak Kyeong Kim
  • Sang Bong KimEmail author
Conference paper
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 554)

Abstract

This paper proposes a MIMO robust servo controller design method for a three wheeled Omnidirectional Automated Guided Vehicles (OAGVs) with a disturbance to track desired references using a polynomial differential operator. The process for designing the proposed controller can be described as follows: Firstly, modeling of the MIMO three-wheeled OAGV are presented. Secondly, a new extended system is obtained by applying the polynomial differential operator to the state space model and the output velocity error vector. Thirdly, the proposed controller for the given plant is designed by using the pole assignment method. By applying an inverse polynomial differential operator, a servo compensator is obtained. Finally, in order to verify the effectiveness of the proposed controller, the numerical simulation results are shown. The simulation results show that the proposed controller has good tracking performance under a step type of disturbance and the complicated higher order reference signals such as ramp and parabola. These simulation results are compared with those of the adaptive controller proposed by Bui, T. L. in 2013. The proposed controller shows the better tracking performance than the adaptive controller.

Keywords

MIMO OAGV Three-wheeled Polynomial differential operator 

Notes

Acknowledgement

This work (Grants No. S2608022) was supported by Business for Cooperative R&D between Industry, Academy, and Research Institute funded Korea Small and Medium Business Administration in 20.

References

  1. 1.
    Watanabe, K., Shiraishi, Y., Spyros, G.: Feedback control of an omnidirectional autonomous platform for mobile service robots. Intell. Rob. Syst. 22, 315–330 (1998)CrossRefGoogle Scholar
  2. 2.
    Kim, S.D., Hyun, C.H., Cho, Y.W., Kim, S.W.: Tracking control of 3-wheels omni-directional mobile robot using fuzzy azimuth estimator. In: 10th WSEAS International Conference on Robotics Control and Manufacturing Technology, vol. 11, no. 10, pp. 3873–3879 (2010)Google Scholar
  3. 3.
    Liu, Y., Zhu, J.J., Robert, L., Williams, I.I., Wu, J.: Omni-directional mobile robot controller based on trajectory linearization. Robot. Auton. Syst. 56, 461–479 (2008)CrossRefGoogle Scholar
  4. 4.
    Ranjbar, S.B., Shabaninia, F., Nemati, A., Stan, S.: A novel robust decentralized adaptive fuzzy control for swarm formation of multiagent systems. Ind. Electron. 59(8), 3124–3134 (2012)CrossRefGoogle Scholar
  5. 5.
    Xu, D., Zhao, D., Yi, J., Tan, X., Chen, Z.: Trajectory tracking control of omnidirectional wheeled mobile manipulators: robust neural network-based sliding mode approach. Robot. Autom. 39(3), 1653–1658 (2008)Google Scholar
  6. 6.
    Hung, N., Tuan, D.V., Sung, J.K., Kim, H.K., Kim, S.B.: Motion control of an omnidirectional mobile platform for trajectory tracking using an integral sliding mode controller. Autom. Syst. 8(6), 1221–1231 (2010)CrossRefGoogle Scholar
  7. 7.
    Bui, T.L., Doan, P.T., Kim, H.K., Nguyen, V.G., Kim, S.B.: Adaptive motion controller design for an omnidirectional AGV based on laser sensor. In: Lecture Notes in Electrical Engineering, vol. 282, pp. 509–523. Springer, Heidelberg (2013)Google Scholar
  8. 8.
    Kim, S.B., Kim, D.H., Pratama, P.S., Kim, J.W., Kim, H.K., Oh, S.J., Jung, Y.S.: MIMO robust servo controller design based on internal model principle using polynomial differential operator. In: Lecture Notes in Electric Engineering, vol. 371, pp. 469–484. Springer, Cham (2015)Google Scholar
  9. 9.
    Kim, S.B., Nguyen, H.H., Kim, D.H., Kim, H.K.: Robust servo controller design for MIMO systems based on linear shift invariant differential operator. J. Inst. Control Robot. Syst. 24(6), 501–511 (2018)CrossRefGoogle Scholar
  10. 10.
    Kim, D.H., Pratama, P.S., Doan, P.T., Oh, S.J., Min, J.H., Jung, Y.S., Duong, V.T., Kim, S.B.: Application of servo controller design for speed control of AC Induction Motors using polynomial differential operator. In: Lecture Notes in Electric Engineering, vol. 371, pp. 337–352. Springer, Cham (2015)Google Scholar
  11. 11.
    Kim, D.H., Nguyen, T.H., Pratama, P.S., Gulakari, A.V., Kim, H.K., Kim, S.B.: Servo system design for speed control of AC induction motors using polynomial differential operator. Int. J. Control Autom. Syst. 15(3), 1207–1216 (2017)CrossRefGoogle Scholar
  12. 12.
    Nguyen, T.H., Lee, J.W., Kim, H.K., Tran, T.P., Choe, Y.W., Dinh, V.T., Kim, S.B.: Servo controller design for speed control of BLDC motors using polynomial differential operator method. In: Lecture Notes in Electric Engineering, vol. 371, pp. 353–365. Springer, Cham (2015)Google Scholar
  13. 13.
    Nguyen, T.H., Kim, D.H., Oh, S.J., Kim, H.K., Kim, S.B.: Controller design for MIMO servo system using polynomial differential operator–A solution for increasing speed of an induction conveyor system. In: Lecture Notes in Electric Engineering, vol. 415, pp. 529–542. Springer, Cham (2016)Google Scholar
  14. 14.
    Furuta, K., Kim, S.B.: Pole assignment in a specified disk. IEEE Trans. Autom. Control 32(5), 423–427 (1987)CrossRefGoogle Scholar
  15. 15.
    Kim, S.B., Furuta, K.: Regulator design with poles on a specified region. Int. J. Control 47(1), 143–160 (1988)MathSciNetCrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Van Lanh Nguyen
    • 1
  • Sung Won Kim
    • 1
  • Choong Hwan Lee
    • 2
  • Dae Hwan Kim
    • 1
  • Hak Kyeong Kim
    • 1
  • Sang Bong Kim
    • 1
    Email author
  1. 1.Department of Mechanical Design EngineeringPukyong National UniversityBusanRepublic of Korea
  2. 2.Department of Machine System EngineeringDongwon Institute of Science and TechnologyYangsanRepublic of Korea

Personalised recommendations