Advertisement

Fluid Dynamic Principles

  • Johann Friedrich GülichEmail author
Chapter

Zusammenfassung

The nearly inexhaustible variety of flow phenomena - from the flow through blood vessels, the flow in centrifugal pumps to global weather events - is based on a few basic physical laws only. In this chapter these will be briefly reviewed and their general nature illuminated. Emphasis will be on the phenomena which are of special interest and significance to the pump engineer. Basic knowledge of the terms of fluid dynamics is taken for granted. There is a wealth of textbooks and handbooks on fluid dynamics, only a few can be quoted: [1, 2, 3, 6, 7, 11, 15, 18, 19].

References

  1. 1.
    Ackeret, J.: Aspects of internal flow. In: Fluid Mechanics of Internal Flow. Elsevier Science, Amsterdam (1967)Google Scholar
  2. 2.
    Albring, W.: Angewandte Strömungslehre, 6th edn. Akademie, Berlin (1990)zbMATHGoogle Scholar
  3. 3.
    Blevins, R.D.: Applied Fluid Dynamics Handbook. Van Nostrand Reinhold, New York (1984)Google Scholar
  4. 4.
    Churchill, S.W.: Viscous Flows. The Practical Use of Theory. Butterworth Series in Chemical Engineering (1988). ISBN:0-409-95185-4Google Scholar
  5. 5.
    Grein, H.: Einige Bemerkungen über die Oberflächenrauheit der benetzten Komponenten hydraulischer Großmaschinen, Nr. 1, pp. 34–40. Escher Wyss Mitteilungen (1975)Google Scholar
  6. 6.
    Idelchick, I.E.: Handbook of Hydraulic Resistance, 3rd edn. CRC Press, Boca Raton (1994)Google Scholar
  7. 7.
    Johnson, R.W.: The Handbook of Fluid Dynamics. CRC Press LLC, Boca Raton (1998)zbMATHGoogle Scholar
  8. 8.
    Kline, S.J.: On the nature of stall. ASME J. Basic Eng. 81, 305–320 (1959)CrossRefGoogle Scholar
  9. 9.
    Knauss, J. (Hrsg): Swirling Flow Problems at Intakes. IAHR Hydraulic structures design manual. AA Balkema, Rotterdam (1987). ISBN:90 6191 643 7Google Scholar
  10. 10.
    McDonald, A.T., Fox, R.W.: An experimental investigation of incompressible flow in conical diffusers. Int. J. Mech. Sci. 8, 125–139 (1966)CrossRefGoogle Scholar
  11. 11.
    Miller, D.S.: Internal Flow Systems, 2nd edn. BHRA, Cranfield (1990)Google Scholar
  12. 12.
    Nikuradse, J.: Strömungsgesetze in rauhen Rohren. VDI Forschungsheft 361 (1933)Google Scholar
  13. 13.
    Reneau, L.R., et al.: Performance and design of straight, two-dimensional diffusers. ASME J. Basic Eng. 89, 141–150 (1967)CrossRefGoogle Scholar
  14. 14.
    Schlichting, H.: Grenzschicht-Theorie, 8th edn. Braun, Karlsruhe (1982)zbMATHGoogle Scholar
  15. 15.
    Siekmann, H.E.: Strömungslehre Grundlagen. Springer, Berlin (2000)CrossRefGoogle Scholar
  16. 16.
    Siekmann, H.E.: Strömungslehre für den Maschinenbau. Springer, Berlin (2000)Google Scholar
  17. 17.
    Sprenger, H.: Experimentelle Untersuchungen an geraden und gekrümmten Diffusoren. Diss, ETH Zürich (1959)Google Scholar
  18. 18.
    Truckenbrodt, E.: Fluidmechanik, 4th edn. Springer, Berlin (1996)zbMATHGoogle Scholar
  19. 19.
    White, F.M.: Fluid Mechanics, 2nd edn. McGraw Hill, New York (1986)Google Scholar
  20. 20.
    Fukuda, H.: The effect of runner surface roughness on the performance of a Francis turbine. Bull. JSME 7(4), 346–356 (1964)CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  1. 1.VilleneuveSwitzerland

Personalised recommendations