Advertisement

Teaching Sustainable Lean: The Next Step Towards Inculcating a Critical Problem-Solving Mindset

  • Rupy SawhneyEmail author
  • Ninad Pradhan
  • Nelson Matias
  • Enrique Macias De Anda
  • Esdras Araujo
  • Samuel Trevino
  • Carla Arbogast
Chapter

Abstract

The constant business pressure to increase operational efficiency promotes Lean. However, studies indicate that Lean has under delivered as a sustainable practice, with few companies developing a “culture of Lean”. This is essentially because practitioners perceive Lean as a set of tools and techniques, instead of adopting a systems approach to addressing issues. Existing approaches to Lean teaching also contribute to the problem; they are not geared towards creating a critical problem-solving mindset which can create systems thinkers. Lean sustainability failures are also exacerbated by Lean’s push for waste reduction, often at the cost of employee well-being. The Sustainable Lean model, developed at the University of Tennessee, balances the inherent struggle between perfect operational and perfect people systems. The balance is created by following four principles: 1. Reduce resource and effort level by strategic problem definition, 2. Align all efforts with system growth and competitiveness, 3. Enhance throughput and capacity, and 4. Enhance employee quality of life. The model inculcates the elements of a critical problem-solving mindset: defining the correct problem, effectively solving the problem, and integrating people requirements into the solution design. This model has become the basis of the systematic development of undergraduate courses, graduate courses, and special programs.

Notes

Acknowledgements

The authors wish to thank the following graduate assistants and teaching assistants, who have significantly contributed to either the instruction or development for the described courses and programs: Roshanak Akram, Abhinav Raghavan, Aravind Satyanarayanan, and Vasanth Mannivannan. Our thanks to Prof. Messias Silva for his insights on pedagogy.

References

  1. Alves, A. C., Flumerfelt, S., Moreira, F., & Leão, C. P. (2017). Effective tools to learn lean thinking and gather together academic and practice communities. In Volume 5: Education and globalization (p. V005T06A009). ASME. http://doi.org/10.1115/IMECE2017-71339.
  2. Alves, A. C., Leao, C. P., Maia, L. C., & Amaro, P. A. (2016). Lean education impact in professional life of engineers. In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Vol. 5). http://doi.org/10.1115/IMECE201667034.
  3. American Council on Education/Department Leadership Project. (2005). A purposeful approach to teamwork (Vol. 21, No. 6). Academic Leader. Retrieved from http://www2.acenet.edu/resources/chairs/docs/Glenn_teams.pdf.
  4. Badal, S. B. (2016). Skills learned in school differ from those demanded at work. Gallup. Retrieved from https://news.gallup.com/businessjournal/188828/skills-learned-school-differ-demanded-work.aspx.
  5. Berry, C., & Taylor, J. (2014, May). Internationalization in higher education in Latin America: Policies and practice in Colombia and Mexico. Higher Education, 67(5), 585–601.Google Scholar
  6. Bhamu, J., & Sangwan, K. S. (2014) Lean manufacturing: Literature review and research issues. International Journal of Operations & Production Management, 34(7), 876–940.  https://doi.org/10.1108/IJOPM-08-2012-0315.
  7. Bhasin, S. (2012). Prominent obstacles to lean. International Journal of Productivity and Performance Management, 61(4), 403–425.  https://doi.org/10.1108/17410401211212661.CrossRefGoogle Scholar
  8. Brighenti, J., Biavatti,V. T., & Souza, T. R. (2015). Metodologias de Ensino-aprendizagem: uma abordagem sob percepção dos alunos. https://dx.doi.org/10.5007/1983-4535.2015v8n3p281. Retrieved from https://periodicos.ufsc.br/index.php/gual/article/download/1983-4535.../30483.
  9. Buck Institute for Education. (2018). What is PBL? Retrieved from http://www.bie.org/about/what_pbl.
  10. CARLA—Center for Advanced Research on Language Acquisition. (2014). What is culture? Retrieved from http://carla.umn.edu/culture/definitions.html.
  11. Cherry, K. (2018). Skinner, B. F. Biography: One leader of behaviorism. Retrieved from https://www.verywellmind.com/b-f-skinner-biography-1904-1990-2795543.
  12. Conti, R., Angelis, J., Cooper, C., Faragher, B., & Gill, C. (2006). The effects of lean production on worker job stress. International Journal of Operations & Production Management, 26(9), 1013–1038.  https://doi.org/10.1108/01443570610682616.CrossRefGoogle Scholar
  13. Davidovitch, L., Parush, A., & Shtub, A. (2006). Simulation-based learning in engineering education: Performance and transfer in learning project management. Journal of Engineering Education, 95(4), 289–299.CrossRefGoogle Scholar
  14. Degirmenci, T., Yegul, M. F., Erenay, F. S., Striepe, S., & Yavuz, M. (2013). Potential of standardization and certification for successful lean implementations. Journal of Enterprise Transformation, 3(3), 211–232.CrossRefGoogle Scholar
  15. Distler, W. (2016). Intervention as a social practice: Knowledge formation and transfer in the everyday of police missions. International Peacekeeping, 23(2), 326–349.Google Scholar
  16. Downey, G. (2005). Are engineers losing control of technology? Chemical Engineering Research and Design, 83(6), 583–595.  https://doi.org/10.1205/cherd.05095.CrossRefGoogle Scholar
  17. Felder, R. M., & Brent, R. (2003). Designing and teaching courses to satisfy the ABET engineering criteria. Journal of Engineering Education, 92, 7–25.  https://doi.org/10.1002/j.2168-9830.2003.tb00734.x.CrossRefGoogle Scholar
  18. Felder, R. M., & Silverman, L. K. (1988). Learning and teaching styles in engineering education. Engineering education, 78(7), 674–681.Google Scholar
  19. Fliedner, G., & Mathieson, K. (2009). Learning lean: A survey of industry lean needs. Journal of Education for Business, 84(4), 194–199.CrossRefGoogle Scholar
  20. Flumerfelt, S., Alves, A. C., Leão, C. P., & Wade, D. L. (2016). What do organizational leaders need from lean graduate programming. European Journal of Training and Development, 40(5), 302–320.  https://doi.org/10.1108/EJTD-01-2015-0005.CrossRefGoogle Scholar
  21. Gaspar, A. (2007). A educação formal e a educação informal em ciências. Retrieved from http://www.casadaciencia.ufrj.br/Publicacoes/terraincognita/cienciaepublico/artigos/art14_aeducacaoformal.pdf.
  22. Gurumurthy, A., & Kodali, R. (2009). Application of benchmarking for assessing the lean manufacturing implementation. Benchmarking: An International Journal, 16(2), 274–308.  https://doi.org/10.1108/14635770910948268.
  23. Hackathorn, J., Solomon, E. D., Blankmeyer, K. L., Tennial, R. E., & Garczynski, A. M. (2011). Learning by doing: An empirical study of active teaching techniques. Journal of Effective Teaching, 11(2), 40–54.Google Scholar
  24. Hozak, K., & Olsen, E. O. (2015). Lean psychology and the theories of “Thinking, Fast and Slow”. International Journal of Lean Six Sigma, 6(3), 206–225.  https://doi.org/10.1108/ijlss-10-2014-0030.CrossRefGoogle Scholar
  25. Johnson, D. W. (1991). Cooperative learning: Increasing college faculty instructional productivity. ASHE-ERIC Higher Education Report No. 4, 1991. ASHE-ERIC Higher Education Reports, George Washington University, One Dupont Circle, Suite 630, Washington, DC 20036-1183.Google Scholar
  26. Knoll, M. (2014). Project method. In D.C. Phillips (Ed.), Encyclopedia of educational theory and philosophy (Vol. 2, pp. 665–669). Thousand Oaks, CA: Sage. Retrieved from http://www.mi-knoll.de/150901.html.
  27. Kolb, D. A. (2015) Experiential learning: Experience as the source of learning and development. New Jersey: Pearson Education. Retrieved from http://ptgmedia.pearsoncmg.com/images/9780133892406/samplepages/9780133892406.pdf.
  28. Liker, J. K. (2004). The Toyota way: 14 management principles from the world’s greatest manufacturer. New York: McGraw-Hill.Google Scholar
  29. Little, J. D. C. (1961). A proof for the queuing formula: L = λW. Operations Research, 9(3), 383–387.CrossRefGoogle Scholar
  30. Long, H. (2016). College enrollment is dropping. Bad sign? CNN. Retrieved from https://money.cnn.com/2016/05/20/news/economy/college-enrollment-down/index.html.
  31. Luijten-Lub, A., Van der Wende, M., & Huisman, J. (2005). On cooperation and competition: A comparative analysis of national policies for internationalisation of higher education in seven Western European countries. Journal of Studies in International Education, 9(2), 147–163.CrossRefGoogle Scholar
  32. Maslow, A., & Lewis, K. J. (1987). Maslow’s hierarchy of needs (p. 14). Salenger Inc.Google Scholar
  33. Mejabi, O. O. (2003). Framework for a lean manufacturing planning system. International Journal of Manufacturing Technology and Management, 5(5–6), 563–578.CrossRefGoogle Scholar
  34. Mezirow, J. (1997). Transformative learning: Theory to practice. New Directions for Adult and Continuing Education, 1997, 5–12.  https://doi.org/10.1002/ace.7401.CrossRefGoogle Scholar
  35. Monden, Y. (2011). Toyota production system: An integrated approach to just-in-time. Boca Raton: CRC Press.Google Scholar
  36. Narayanamurthy, G., & Gurumurthy, A. (2016). Leanness assessment: A literature review. International Journal of Operations & Production Management, 36(10), 1115–1160.CrossRefGoogle Scholar
  37. Neves, J., & Hillman, N. (2017). Student academic experience survey. Higher Education Policy Institute and Higher Education Academy, 12. Retrieved from https://www.hepi.ac.uk/wp-content/uploads/2017/06/2017-Student-Academic-Experience-Survey-Final-Report.pdf.
  38. Oleghe, O., & Salonitis, K. (2016). Variation modeling of lean manufacturing performance using fuzzy logic based quantitative lean index. Procedia CIRP, 41, 608–613.  https://doi.org/10.1016/j.procir.2016.01.008.CrossRefGoogle Scholar
  39. Ōno, T. (1988). Toyota production system: Beyond large-scale production. Cambridge, MA: Productivity Press.Google Scholar
  40. Pay, R. (2008). Everybody’s jumping on the lean bandwagon, but many are being taken for a ride (p. 5). Industry Week.Google Scholar
  41. Pazmino, A. V. (2019). Model of teaching methods for product design. Doctoral dissertation, Design Department, Pontifícia Universidade Católica do Rio de Janeiro. Rio de Janeiro, 450p.Google Scholar
  42. Ricker, S. (2014). More than half of employed 2014 college grads are in jobs that don’t require a degree. Retrieved from https://www.careerbuilder.com/advice/more-than-half-of-employed-2014-college-grads-are-in-jobs-that-dont-require-a-degree.
  43. Sawhney, R., & Macias de Anda, E. (2014). Industrial engineers articulate their critical thinking for problem solving via the D.R.I.V.E.S. model. QScience Proceedings, 2014(3), 23.  https://doi.org/10.5339/qproc.2014.wcee2013.23.
  44. Sawhney, R. S., & Macias de Anda, E. (2017). Sawhney lean educational maturity model at the University of Tennessee. In Lean education: An overview of current issues (pp. 99–124). Cham: Springer.Google Scholar
  45. Schmidt, E. P. (2018). Postsecondary enrollment before, during, and since the great recession. U.S. Department of Commerce Economics and Statistics Administration, U.S. Census Bureau. Census.gov. Retrieved from https://www.census.gov/content/dam/Census/library/publications/2018/demo/P20-580.pdf.
  46. Siufi, G. (2009, October). Cooperación internacional e internacionalización de la educación superior. Revista Educación Superior y Sociedad (ESS) ISSN: 0798-1228/ISSN: 2610-7759 (En línea), [S.l.] (Vol. 14, No. 1, pp. 119–146). ISSN 2610-7759. Disponible en: http://ess.iesalc.unesco.org.ve/ess3/index.php/ess/article/view/55. Fecha de acceso: 12 nov. 2018.
  47. Stromquist, N. P. (2007). Internationalization as a response to globalization: Radical shifts in university environments. Higher Education, 53(1), 81–105.CrossRefGoogle Scholar
  48. Suskie, L. A. (2009). Assessing student learning: A common sense guide (2nd ed.). San Francisco, CA: Jossey-Bass.Google Scholar
  49. Teed, R. (2018). Game-based learning. SERC—Carleton College. Retrieved from https://serc.carleton.edu/sp/library/games/index.html.
  50. Udro Outreach. (2015). Human development reports. United Nations Development Programme. Retrieved from http://hdr.undp.org/en/content/what-human-development.
  51. UNESCO. (1998). World declaration on higher education for the twenty-first century: Vision and action. Retrieved from http://www.unesco.org/education/educprog/wche/declaration_eng.htm.
  52. UN General Assembly. (2015). Transforming our world: The 2030 Agenda for sustainable development. Retrieved from https://sustainabledevelopment.un.org/sdgs.
  53. Weibell, C. J. (2011). Principles of learning: 7 principles to guide personalized, student-centered learning in the technology-enhanced, blended learning environment. Retrieved from https://principlesoflearning.wordpress.com.
  54. Yadav, A., Shaver, G. M., & Meckl, P. (2013). Lessons learned: Implementing the case teaching method in a mechanical engineering course. Retrieved from https://onlinelibrary.wiley.com/doi/abs/10.1002/j.2168-9830.2010.tb01042.x.
  55. Yale/Center for Teaching and Learning. (2018). Discussion methods. Retrieved from https://ctl.yale.edu/resources/teaching-techniques-and-methods/discussion-methods.

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Rupy Sawhney
    • 1
    Email author
  • Ninad Pradhan
    • 1
  • Nelson Matias
    • 2
    • 3
  • Enrique Macias De Anda
    • 1
  • Esdras Araujo
    • 1
  • Samuel Trevino
    • 1
  • Carla Arbogast
    • 1
  1. 1.University of TennesseeKnoxvilleUSA
  2. 2.Universidade do Estado do Rio de Janeiro (UERJ)Rio de JaneiroBrazil
  3. 3.Centro Universitário Teresa D’ Ávila (UNIFATEA)LorenaBrazil

Personalised recommendations