Advertisement

Large-Scale Simulation of Site-Specific Propagation Model: Defining Reference Scenarios and Performance Evaluation

  • Zeeshan Hameed MirEmail author
Conference paper
Part of the Lecture Notes on Data Engineering and Communications Technologies book series (LNDECT, volume 29)

Abstract

The vehicular network research community continue to strive for improvements in the accuracy and validity of simulation-based studies. While there have been several new enhancements, most of the network simulators lack comprehensive support to represent real wireless channel characteristics, especially at the physical (PHY) layer. The test-bed has been a widely-accepted alternative which is capable of bringing realism to the performance evaluation. However, higher implementation cost and scalability issues prevent test-bed from being a viable solution for large-scale performance evaluation studies. Therefore, realistic simulation frameworks are highly sought-after to reduce the implementation cost and complexity for city-wide testing of novel networking protocols and algorithms. In this paper, a set of common reference scenarios are introduced in the city of Fujairah, UAE. These reference scenarios exhibit different wireless channel characteristics specific to the requirements in vehicular communication. Next, a generic simulation framework is described that combines a suite of simulation tools. The framework utilizes a site-specific, geometry-based vehicular propagation approach which models different characteristics of a wireless link more accurately. Finally, through extensive simulation, each reference scenario is evaluated in terms of received signal strength, packet delivery ratio, and reliable communication range.

References

  1. 1.
    Al-Bado, M., Sengul, C., Merz, R.: What details are needed for wireless simulations? - A study of a site-specific indoor wireless model. In: 2012 IEEE INFOCOM, pp. 289–297 (2012)Google Scholar
  2. 2.
    Mir, Z.H., Filali, F.: Large-scale simulations and performance evaluation of connected cars - a V2V communication perspective. Simul. Model. Pract. Theory 73, 55–71 (2017)CrossRefGoogle Scholar
  3. 3.
    Dennis, M.R., Thomas, J., Thomas, W., Ulrich, T., Kürner, T.: The IC 1004 urban Hannover scenario - 3D pathloss predictions and realistic traffic and mobility patterns. In: European Cooperation in the Field of Scientific and Technical Research, COST, 8th IC1004 MC and Scientific Meeting, Ghent, TD(13)08054 (2013)Google Scholar
  4. 4.
    Möller, A., Baumgarten, J., Mir, Z.H., Filali, F., Kürner, T.: Realistic simulation scenario for hybrid LTE/IEEE 802.11p vehicular communication. In: IEEE 9th European Conference on Antennas and Propagation (EuCAP) (2015)Google Scholar
  5. 5.
    Dreyer, N., Möller, A., Baumgarten, J., Mir, Z.H., Kürner, T., Filali, F.: On building realistic reference scenarios for IEEE 802.11p/LTE-based vehicular network evaluations. In: 2018 IEEE 87th Vehicular Technology Conference (VTC Spring), pp. 1–7 (2018)Google Scholar
  6. 6.
    Mir, Z.H., Filali, F.: Applications, requirements, and design guidelines for multi-tiered vehicular network architecture. In: 2018 Wireless Days (WD), pp. 15–20 (2018)Google Scholar
  7. 7.
    Rondinone, M., Maneros, J., Krajzewicz, D., Bauza, R., Cataldi, P., Hrizi, F., Gozalvez, J., Kumar, V., Röckl, M., Lin, L., Lazaro, O., Leguay, J., Härri, J., Vaz, S., Lopez, Y., Sepulcre, M., Wetterwald, M., Blokpoel, R., Cartolano, F.: iTETRIS: a modular simulation platform for the large scale evaluation of cooperative its applications. Simul. Model. Pract. Theory 34, 99–125 (2013)CrossRefGoogle Scholar
  8. 8.
    Brahim, M.B., Mir, Z.H., Znaidi, W., Filali, F., Hamdi, N.: Qos-aware video transmission over hybrid wireless network for connected vehicles. IEEE Access 5, 8313–8323 (2017)CrossRefGoogle Scholar
  9. 9.
    Sommer, C., German, R., Dressler, F.: Bidirectionally coupled network and road traffic simulation for improved IVC analysis. IEEE Trans. Mob. Comput. 10(1), 3–15 (2011)CrossRefGoogle Scholar
  10. 10.
    Bylykbashi, K., Spaho, E., Barolli, L., Xhafa, F.: Impact of node density and TTL in vehicular delay tolerant networks: performance comparison of different routing protocols. Int. J. Space Based Situated Comput. 7(3), 136–144 (2017)CrossRefGoogle Scholar
  11. 11.
    Zafar, B., Mir, Z.H., Shams, S.M.S., Ikram, M., Baig, W.A., Kim, K., Yoo, S.: On improved relay nodes placement in two-tiered wireless sensor networks. In: 2009 IEEE Military Communications Conference (MILCOM), pp. 1–7 (2009)Google Scholar
  12. 12.
    Mir, Z.H., Filali, F.: Simulation and performance evaluation of vehicle-to-vehicle (V2V) propagation model in urban environment. In: 2016 7th International Conference on Intelligent Systems, Modelling and Simulation (ISMS), pp. 394–399 (2016)Google Scholar
  13. 13.
    Mir, Z.H., Filali, F.: A simulation-based study on the environment-specific propagation model for vehicular communications. Int. J. Veh. Telemat. Infotain. Syst. (IJVTIS) 1(1), 15–32 (2017)Google Scholar
  14. 14.
    Sommer, C., Eckhoff, D., German, R., Dressler, F.: A computationally inexpensive empirical model of IEEE 802.11p radio shadowing in urban environments. In: 2011 8th International Conference on Wireless On-Demand Network Systems and Services (WONS), pp. 84–90 (2011)Google Scholar
  15. 15.
    He, D., Liang, G., Portilla, J., Riesgo, T.: A novel method for radio propagation simulation based on automatic 3D environment reconstruction. In: 2012 6th European Conference on Antennas and Propagation (EuCAP), pp. 1445–1449 (2012)Google Scholar
  16. 16.
    Nuckelt, J., Rose, D., Jansen, T., Kürner, T.: On the use of openstreetmap data for V2X channel modeling in urban scenarios. In: 2013 7th European Conference on Antennas and Propagation (EuCAP), pp. 3984–3988 (2013)Google Scholar
  17. 17.
    Wang, X., Anderson, E., Steenkiste, P., Bai, F.: Improving the accuracy of environment-specific channel modeling. IEEE Trans. Mob. Comput. 15(4), 868–882 (2016)CrossRefGoogle Scholar
  18. 18.
    Boban, M., Barros, J., Tonguz, O.: Geometry-based vehicle-to-vehicle channel modeling for large-Scale simulation. IEEE Trans. Veh. Technol. 63, 4146–4164 (2014)CrossRefGoogle Scholar
  19. 19.
    OpenStreetMap Foundation (OSM), 5 November 2018. http://www.openstreetmap.org
  20. 20.
  21. 21.
    Java OpenStreetMap (JOSM) editor, 5 November 2018. http://josm.openstreetmap.de/
  22. 22.
    DLR - Institute of Transportation Systems: SUMO - Simulation of Urban MObility, 5 November 2018. http://sumo-sim.org
  23. 23.
    Google Earth Pro V7.1.8.3036, Fujariah, United Arab Emirates (UAE) - Imaginary Date 5/11/2018, Accessed 5/11/2018, 25\(^\circ \)07\(^\prime \)54.8330\(^{\prime \prime } \)N, 056\(^\circ \)20\(^\prime \)08.9270\(^{\prime \prime } \)E, 5 November 2018. https://www.google.com/earth/
  24. 24.
    ASTM E2213-03: Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems - 5-GHz Band Dedicated Short-Range Communications (DSRC), Medium Access Control (MAC), and Physical Layer (PHY) Specifications (2018)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Faculty of Computer Information ScienceHigher Colleges of Technology (HCT)FujairahUnited Arab Emirates

Personalised recommendations