Advertisement

Design and Experimental Optimisation of a cm-Scale Wind Turbine for Energy Harvesting

  • G. TomasiniEmail author
  • D. Tarsitano
  • S. Giappino
  • L. Bernini
Conference paper
Part of the Lecture Notes in Civil Engineering book series (LNCE, volume 27)

Abstract

Wind turbine is a good choice for energy harvesting on trains. The air flow is generated by the train movement and it is quite simple to find places with high flow speed near the wireless sensor nodes location which are typically mounted on bogies and wheelsets. The requested amount of energy is relatively small, in the order of 0.01–0.05 W, allowing for wind turbines with very small diameter, between 2 to 6 cm. In the present work a newly designed turbine is described. The turbine is placed in a duct with protection purposes and it has a symmetrical design that results in power production independently from the train movement direction.

Keywords

Duct wind turbines Energy harvesting Sensor nodes Wind tunnel test BEM approach 

References

  1. Howey DA, Bansal A, Holmes AS (2011) Design and performance of a centimetre-scale shrouded wind turbine for energy harvesting. Smart Mater Struct 20(8). Article no. 085021CrossRefGoogle Scholar
  2. Jafari SAH, Kosasih B (2014) Flow analysis of shrouded small wind turbine with a simple frustum diffuser with computational fluid dynamics simulations. J Wind Eng Ind Aerodyn 125:102–110CrossRefGoogle Scholar
  3. Lyon CA, Broeren AP, Giguere P, Gopalarathnam A, Selig MS (1997) Summary of low-speed airfoil data, vol 3Google Scholar
  4. Milani D, Bassetti M, Braghin F, Tomasini G (2014) Design of a wireless sensor powered by a piezoelectric energy harvester. In: ASME 2014 12th biennial conference on engineering systems design and analysis, ESDA 2014Google Scholar
  5. Rancourt D, Tabesh A, Fréchette L (2007) Evaluation of centimeter-scale micro wind mills: aerodynamics and electromagnetic power generation. In: Proceedings of the 7th international workshop on micro and nanotechnology for power generation & energy conversion app’s (PowerMEMS 2007), Freiburg, Germany, 27–29 November 2007Google Scholar
  6. Tomasini G, Giappino S, Costa A (2016) Galloping-based piezo-aeroelastic energy harvester for wireless sensors to be installed on freight trains. In: Proceedings of SPIE - the international society for optical engineering, vol 9799. Article no. 97990LGoogle Scholar
  7. Xu FJ, Yuan FG, Hu JZ, Qiu YP (2014) Miniature horizontal axis wind turbine system for multipurpose application. Energy 75:216–224CrossRefGoogle Scholar
  8. Xu FJ, Yuan FG, Hu JZ, Qiu YP (2010) Design of a miniature wind turbine for powering wireless sensors. In: Proceedings of SPIE - the international society for optical engineering, vol 7647. Article no. 764741Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • G. Tomasini
    • 1
    Email author
  • D. Tarsitano
    • 1
  • S. Giappino
    • 2
  • L. Bernini
    • 1
  1. 1.Department of Mechanical EngineeringPolitecnico di MilanoMilanItaly
  2. 2.GVPMPolitecnico di MilanoMilanItaly

Personalised recommendations