Advertisement

Definition of Wind Loads on the Riyadh Western Metro Station

  • P. SchitoEmail author
  • L. Rosa
  • A. Zasso
Conference paper
Part of the Lecture Notes in Civil Engineering book series (LNCE, volume 27)

Abstract

Design of large modern structures can be strongly affected by wind actions, in terms of dynamic loading as well as peak façade cladding load. The wind forcing can be described by means of CFD analysis as well by wind tunnel tests using a scaled model instrumented with pressure taps. The density and the distribution of pressure taps on the building surface is critical, as well as the averaging of the surface pressure time history for the definition of the wind actions. Dynamic actions are calculated using a modal approach, while pressure excitation is computed according to time equivalent area averaging. The definition of the time equivalent area averaging is carefully analysed, in order to provide pressure values consistent with the forcing area.

Keywords

Wind loads Wind tunnel tests Dynamic response TMD 

References

  1. 1.
    Eurocode1 (2005) UNI EN 1991-1-4. Actions on structures - Part 1-4: General actions - Wind actions, April 2005Google Scholar
  2. 2.
    ASCE 7-05. Minimum Design Loads for Buildings and Other StructuresGoogle Scholar
  3. 3.
    Irwin PA (2009) Wind engineering challenges of the new generation of super-tall buildings. J Wind Eng Ind Aerodyn 97(7–8):328–334CrossRefGoogle Scholar
  4. 4.
    Rosa L, Tomasini G et al (2012) Wind-induced dynamics and loads in a prismatic slender building: a modal approach based on unsteady pressure measurements. J Wind Eng Ind Aerodyn 107–108:118–130CrossRefGoogle Scholar
  5. 5.
    Holmes JD (1997) Equivalent time averaging in wind engineering. J Wind Eng Ind Aerodyn 72:411–419CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringPolitecnico di MilanoMilanItaly

Personalised recommendations