Advertisement

Introduction

  • João M. P. Q. DelgadoEmail author
  • Antonio Gilson Barbosa de Lima
  • Mariana Julie do Nascimento Santos
Chapter
Part of the SpringerBriefs in Applied Sciences and Technology book series (BRIEFSAPPLSCIENCES)

Abstract

This chapter provides important information about composite materials with emphasis to polymer composite reinforced with fibers, and the motivation to study the liquid composite molding process. Herein, different topics such as definition, classification, constituents, technological characteristics, manufacturing techniques, and performance of polymer composites are presented and discussed.

References

  1. 1.
    Mano EB, Mendes LC (1999) Introduction to polymers, 2nd edn. Edgard Blucher Ltda, São Paulo, Brazil (In Portuguese)Google Scholar
  2. 2.
    Carvalho RF (2005) Composites of sisal fibers for use in reinforcement of wood structures. Doctoral Thesis, Sciences and Materials Engineering, University of São Paulo, São Paulo, Brazil. (In Portuguese)Google Scholar
  3. 3.
    Idicula H, Boudenne A, Umadevi L, Ibos L, Candau Y, Thomas S (2006) Thermophysical properties of natural fibre reinforced polyester composites. Comp. Sci. Technol. 66(15):2719–2725CrossRefGoogle Scholar
  4. 4.
    Callister WD Jr, Rethwisch DG (2008) Fundamentals of materials science and engineering: an integrated approach, 3rd edn. Wiley, Hoboken, USAGoogle Scholar
  5. 5.
    Alexandre MEO (2005) Composites of polyester matrix reinforced with pineapple fiber: mechanical properties and water absorption. Doctoral Thesis, Federal University of Rio Grande do Norte, Natal, Brazil. (In Portuguese)Google Scholar
  6. 6.
    Santos MJN, Delgado JMPQ, Lima AGB (2017) Synthetic fiber-reinforced polymer composite manufactured by resin transfer molding technique: foundations and engineering applications. Diffus Foundations 14:21–42CrossRefGoogle Scholar
  7. 7.
    Melo RQC; Lima AGB (2017) Vegetable fiber-reinforced polymer composites: fundamentals, mechanical properties and applications. Diffus Foundations 14:1–20CrossRefGoogle Scholar
  8. 8.
    Engel L, Klingele H, Ehrenstein GW, Schaper H (1981) Atlas of polymer damage. Prentice Hall, London, EnglandGoogle Scholar
  9. 9.
    Mitchell BS (2004) An introduction to materials engineering and science. New Jersey, USAGoogle Scholar
  10. 10.
    Cavalcanti WS (2006) Composites polyester/woven plant-glass fabrics: mechanical characterization and simulation of water sorption. Doctoral Thesis, Process Engineering, Federal University of Campina Grande, Campina Grande, Brazil. (In Portuguese)Google Scholar
  11. 11.
    Razera IAT (2006) Lignocellulosic fibers as a reinforcing agent for phenolic and lignofenolic matrix composites. Doctoral Thesis, University of São Paulo, Institute of Chemistry of São Carlos, São Carlos, Brazil. (In Portuguese)Google Scholar
  12. 12.
    Chawla KK (2012) Composite materials: science and engineering. Springer-Verlag, New York, USACrossRefGoogle Scholar
  13. 13.
    Callister Jr WD (2003) Materials science and engineering: an introduction, 6th edn. Wiley, New York, USAGoogle Scholar
  14. 14.
    Kim J-K, Mai Y-W (1998) Engineered interfaces in fiber reinforced composites. Elsevier Science Ltd., Oxford, EnglandGoogle Scholar
  15. 15.
    Kaw AK (2006) Mechanics composite materials, 2nd edn. CRC Press, Boca Raton, USAzbMATHGoogle Scholar
  16. 16.
    Hull D, Clyne TW (1996) An introduction to composite materials. Cambridge Solid State Science Series, 2nd edn. England, CambridgeGoogle Scholar
  17. 17.
    Matthews FL, Rawlings RD (1994) Composite materials: engineering and science. Chapman & Hall, Oxford, United KingdomGoogle Scholar
  18. 18.
    Araújo JR (2009) High density polyethylene composites reinforced with carauá fibers obtained from extrusion and injection. Master Dissertation. State University of Campinas, Institute of Chemistry, Campinas, Brazil. (In Portuguese)Google Scholar
  19. 19.
    Shackelford JF (2005) Materials science for engineers, six edn. Peason Prentice Hall, New Jersey, USAGoogle Scholar
  20. 20.
    Callister WD Jr (2008) Materials science and engineering: An introduction, 7th edn. Wiley, New York, USAGoogle Scholar
  21. 21.
    Levy Neto F, Pardini LC (2006) Structural composites—science and technology, 1st edn. Edgard Blucher, São Paulo, BrazilGoogle Scholar
  22. 22.
    Lewin A, Mey-Marom A, Frank R (2005) Surface free energies of polymeric materials, additives and minerals. Polym Adv Technol 16(6):429–445CrossRefGoogle Scholar
  23. 23.
    ABMACO, Brazilian Association of Composite Materials. Available at: http://www.abmaco.org.br/, 15/04/2013
  24. 24.
    Bunsell AR, Renard J (2005) Fundamentals of fibre reinforced composite materials. Institute of Physics (IOP), UKCrossRefGoogle Scholar
  25. 25.
    Castro BFM (2013) Study and mechanical characterization of composites reinforced with natural fibers. Master Dissertation. Mechanical Engineering, University of Porto, Porto, Portugal. (In Portuguese)Google Scholar
  26. 26.
    Astrom BT (1997) Manufacturing of polymer composites. CRC Press, Boca Raton, USAGoogle Scholar
  27. 27.
    Moura MFSF, Morais AB, Magalhães AG (2010) Composite materials—materials, manufacturing and mechanical behavior. Publindústria, Porto, Portugal (In Portuguese)Google Scholar
  28. 28.
    Gutowski TG (1997) Advanced composites manufacturing. Wiley, Cambrigde, USAGoogle Scholar
  29. 29.
    Mazumdar SK (2002) Composites manufacturing: materials, product and process engineering. Taylor & Francis, New York, USAGoogle Scholar
  30. 30.
    Rudd CD, Turner MR, Long AC, Middleton V (1999) Tow placement studies for liquid composite moulding. Comp Part A 30(9):1105–1121CrossRefGoogle Scholar
  31. 31.
    Ratna D (2009) Handbook of thermoset resins. Smithers Publishers, Shawbury, United Kingdom, pp 19–21Google Scholar
  32. 32.
    Mallick PK (2007) Fiber-reinforced composites: materials, manufacturing and design. CRC Press, New York, USACrossRefGoogle Scholar
  33. 33.
    Porto JS (2012) Computational modeling of the resin transfer molding process applied to naval engineering. Master Dissertation. Computational Modeling, Federal University of Rio Grande, Rio Grande, Brazil. (In Portuguese)Google Scholar
  34. 34.
    Lin MY, Kang MK, Hahn HT (2000) A finite element analysis of convection problems in RTM using internal nodes. Comp Part A 31(4):373–383CrossRefGoogle Scholar
  35. 35.
    Grujicic M, Chittajallu KM, Walsh S (2003) Optimization of the VARTM process for enhancement of the degree of devolatilization of polymerization by-products and solvents. J Mater Sci 38(18):3729–3739CrossRefGoogle Scholar
  36. 36.
    Alves ALS (2006) Processing of composite plaques by the SEEMANN resin infusion molding technique (SCRIMP). Master Dissertation. Federal University of Rio de Janeiro, Rio de Janeiro, Brazil. (In Portuguese)Google Scholar

Copyright information

© The Author(s), under exclusive license to Springer Nature Switzerland AG 2019

Authors and Affiliations

  • João M. P. Q. Delgado
    • 1
    Email author
  • Antonio Gilson Barbosa de Lima
    • 2
  • Mariana Julie do Nascimento Santos
    • 2
  1. 1.Faculty of Engineering, CONSTRUCT-LFCUniversity of PortoPortoPortugal
  2. 2.Department of Mechanical EngineeringFederal University of Campina Grande (UFCG)Campina GrandeBrazil

Personalised recommendations