Advertisement

Turbulent Forced Convective Flows in a Horizontal Channel Provided with Heating Isothermal Baffles

  • Amghar KamalEmail author
  • Louhibi Mohamed Ali
  • Salhi Najim
  • Salhi Merzouki
Conference paper
Part of the Advances in Intelligent Systems and Computing book series (AISC, volume 912)

Abstract

This work presents numerical results of turbulent forced convection in a horizontal channel provided with heating two baffles mounted on its lower wall. The upper and lower surfaces are maintained at the high temperature and the fluid inlet temperature is lower than the temperature of the walls. Calculations are made by using a finite volume method and an efficient numerical procedure is introduced for studying the effect of inclination angles on heat transfer and flow field for air and high Reynolds number. Results are reported in terms of streamlines, isotherms and local Nusselt numbers. Overall, we can conclude that the results of the study show that the inclination angles of the heated plate alter significantly the temperature distribution, the flow field and the heat transfer in channel.

It was found that the total heat transfer in a horizontal channel mounted the obstacles is increased under effect increase of inclination angle of baffle.

Keywords

Heat transfer Heated baffles Forced convection Turbulent flow Numerical study 

References

  1. 1.
    Versteeg, H.K., Malalasekera, W.: An Introduction to Computational Fluid Dynamics the Finite Volume Method. Addison Wesley Longman Limited, London (1995)Google Scholar
  2. 2.
    Wilfried, R., Deiying, W.L.: Effect of baffle/shell leakage flow on heat transfer in shell-and-tube heat exchanger. Exp. Thermal Fluid Sci. 8(1), 10–20 (1994)CrossRefGoogle Scholar
  3. 3.
    Rajendra, K.: Experimental study of heat transfer enhancement in an asymmetrically heated rectangular duct with perforated baffles. Int. Commun. Heat Mass Transf. 32(1–2), 275–284 (2005)Google Scholar
  4. 4.
    Gupta, B.B., et al.: A helical baffle for cross-flow micro filtration. J. Membr. Sci. 102, 31–42 (1995)CrossRefGoogle Scholar
  5. 5.
    Lei, Y.-G., et al.: Design and optimization of heat exchangers with helical baffles. Chem. Eng. Sci. 63(17), 4386–4395 (2008)CrossRefGoogle Scholar
  6. 6.
    Demartini, L.C., et al.: Numeric and experimental analysis of the turbulent flow through a channel with baffle plates. J. Braz. Soc. Mech. Sci. Eng. 26(2), 153–159 (2004)CrossRefGoogle Scholar
  7. 7.
    Nasiruddin, M.H., Kamran, S.: Heat transfer augmentation in a heat exchanger tube using a baffle. Int. J. Heat Fluid Flow 28(2), 318–328 (2007)CrossRefGoogle Scholar
  8. 8.
    Saim, R., Bouchenafa, R., Benzenine, H., et al.: A computational work on turbulent flow and heat transfer in a channel fitted with inclined baffles. Heat Mass Transfer 49(6), 761–774 (2013)CrossRefGoogle Scholar
  9. 9.
    Saim, R., Benzenine, H., et al.: Turbulent flow and heat transfer enhancement of forced convection over heated baffles in a channel: effect of pitch of baffles. Int. J. Numer. Methods Heat Fluid Flow 23(4), 613–633 (2013)MathSciNetCrossRefGoogle Scholar
  10. 10.
    Amghar, K., Louhibi, M.A., Salhi, N., Salhi, M.: Numerical simulation of forced convection turbulent in a channel with transverse baffles. J. Mater. Environ. Sci. 8(4), 1417–1427 (2017)Google Scholar
  11. 11.
    Amghar, K., Louhibi, M.A., Salhi, N., Salhi, M.: Numerical modeling of the effect baffle inclination angle on flow and heat transfer along a horizontal channel. World J. Model. Simul. 14(3) (2018, in press)Google Scholar
  12. 12.
    Patankar, S.V.: Numerical Heat Transfer and Fluid Flow, p. 131. McGraw–Hill, New York (1980)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Amghar Kamal
    • 1
    Email author
  • Louhibi Mohamed Ali
    • 1
  • Salhi Najim
    • 1
  • Salhi Merzouki
    • 1
  1. 1.Laboratory of Mechanics and Energy, Faculty of SciencesMohammed First UniversityOujdaMorocco

Personalised recommendations