Tribotechnical Properties of Nanostructured Coppernickel Coatings

  • Margarita A. SkotnikovaEmail author
  • Vladimir P. Artemyev
  • Svetlana A. Shasherina
  • Olga V. Paitova
  • Galina V. Tsvetkova
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)


The tribotechnical, metallographic, physical, and chemical properties of nanostructured copper–nickel coatings applied on products made of X12M tool steel were investigated. The results showed that a significant increase (2.3 times) in the wear resistance of the coatings was achieved after high plastic deformation under a stress of 3.5 GPa. A structure was formed with a minimum size of coherent scattering regions (CSR) of 23 nm and a maximum crystal lattice microstrain value (CLM) of 1.25%.


Wear Nanostructure Coating Intensive plastic deformation 



This work was performed with financial support of the Ministry of Education and Science of the Russian Federation within the grants № 933-2014, № 1972-2014, and № 11.5832.2017/8,9.


  1. 1.
    Flom DG, Komanduri R, Lee M (1994) High-speed machining of metals. Ann Rev Mater Sci 231–278Google Scholar
  2. 2.
    Skotnikova MA, Krylov NA (2016) About nature of dissipative processes at cutting treatment of titanium vanes. In: Proceedings of the 5th international scientific and practical conference “modern engineering: science and education” MMESE-2016. Publishing house of Polytechnical Institute, St. Petersburg, June 30–01 July 2016, pp 530–539Google Scholar
  3. 3.
    Komanduri R, Schroeder T, Hazra J, Von Turkovich BF, Flom DG (1982) On the catastrophic shear instability in high speed machining of an AISI 4340 steel. ASME J Ind 104:121–131CrossRefGoogle Scholar
  4. 4.
    Skotnikova MA, Krylov NA, Van Uyin (2016) Structural and phase transformations in VT-23 alloy at high-speed cutting. In: Proceedings of the IV international scientific-practical conference “innovations in transport and mechanical engineering”, vol. III. National Mineral Resources University “Mining”, St. Petersburg, pp. 130–133Google Scholar
  5. 5.
    Skotnikova MA, Kastorsri DA, Krylov NA (2003) Structural and phase transformations in metals at fast-track cutting. Mater Sci Quest SPb. 1(33):214–224Google Scholar
  6. 6.
    Skotnikova MA, Vinogradov VV, Krylov NA (2005) Accounting of the wave theory of a plastic strain at high-speed machining of surfaces of preparations. Metal Work SPb. 11:12–15Google Scholar
  7. 7.
    Ivanov EK, Skotnikova MA, Krylov NA (2012) Structural phase changes in the hardly processed materials as a way of increase of wear resistance of the tool/scientific and technical sheets SPBGPU. Sci Educ 1:41–52Google Scholar
  8. 8.
    Skotnikova MA, Krylov NA, Motovilina GD etc. (2007) Transformation in two phase titanium alloys under high speed mechanical loading. Mater Sci Quest SPb. 4(52):359–365Google Scholar
  9. 9.
    Skotnikova MA, Krylov NA (2017) About the nature of dissipative processes in cutting treatments of titanium vanes. Advances in mechanical engineering. Springer International Publishing, pp. 115–123Google Scholar
  10. 10.
    Sokolov AG, Artemiev VP, Shasherina SA (2009) The Influence of carbon steel and the nature of the coverage elements on the process and mechanism of formation of diffusion coatings from the environment fusible recomedations-cal solutions. Technol Metals 11:40–44Google Scholar
  11. 11.
    Sokolov AG, Artemiev VP, Shasherina SA (2010) Technology and equipment for the diffusion metallization from environment of the fusible liquid metal solutions. Technol Metals 3:30–35Google Scholar
  12. 12.
    Skotnikova M.A, Shasherina S.A., Krylov N.A., Ivanov E.K. Modern metal materials and technologies/collection of materials of the international scientific and technical conference SPbGPU, Saint Petersburg, Russia, 20–21 June 2011, pp 114–115Google Scholar
  13. 13.
    Skotnikova MA, Shasherina SA, Krylov NA, Tsvetkova GV (2014) Research tribology properties nanostructure diffusion layers of metal coverings. In: XII International conference on nanostructured materials (NANO 2014) 13–18 July 2014, Lomonosov Moscow State University, Moscow, Russia, p 332Google Scholar
  14. 14.
    Skotnikova MA, Tsvetkova GV, Krylov NA, Ivanov EK, Medvedeva VV, Bezenkin NV (2015) Features of wear of abrasive grains depending on microcuttings speed of steels. In: Proceedings of the 24th international conference engineering materials & tribology BaltMatTrib—2015, 5–6 Nov 2015, Tallinn, Estonia, pp. 189–194Google Scholar
  15. 15.
    Skotnikova MA, Krylov NA, Tsvetkova GV (2014) Peculiarities of plastic deformation and wear of abrasive grains at high-speed machining. Ferrous Metals 4(988):84–92Google Scholar
  16. 16.
    Skotnikova MA, Tsvetkova, GV, Krylov NA (2016) Features of wear of abrasive grains depending on microcuttings speed of steels. Key Eng Mater 674. The title of the volume is “Engineering Materials and Tribology” pp 358–364Google Scholar
  17. 17.
    Skotnikova MA, Tsvetkova GV, Lanina AA, Krylov, NA Ivanova GV (2015) Structural and phase transformation in material of blades of steam turbines from titanium alloy after technological treatment. Lect Notes Mech Eng 93–101Google Scholar
  18. 18.
    Skotnikova, MA, Krylov, NA, Ivanov, EK, Tsvetkova GV (2016) Structural and phase transformation in material of steam turbines blades after high-speed mechanical effect. Lect Notes Mech Eng 159–168Google Scholar
  19. 19.
    Skotnikova MA, Tsvetkova GV, Krylov NA, Ivanov EK (2016) Features of wear of abrasive grains depending on microcuttings speed of steels. Key Eng Mater 674:358–364CrossRefGoogle Scholar
  20. 20.
    Skotnikova MA, Krylov NA (2017) About the nature of dissipative processes in cutting treatments of titanium vanes. In: Advances in mechanical engineering. Selected contributions from the conference “modern engineering: science and education”, Saint Petersburg, Russia. Springer, Berlin–Heidelberg, 20–21 June, 2016, pp 115–124Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Margarita A. Skotnikova
    • 1
    Email author
  • Vladimir P. Artemyev
    • 2
  • Svetlana A. Shasherina
    • 2
  • Olga V. Paitova
    • 1
  • Galina V. Tsvetkova
    • 1
  1. 1.Peter the Great Saint-Petersburg Polytechnic UniversitySaint PetersburgRussia
  2. 2.The Kuban State Technological UniversityKrasnodarRussia

Personalised recommendations