Advertisement

Encoder-Motor Misalignment Compensation for Closed-Loop Hybrid Stepper Motor Control

  • Stefano RicciEmail author
  • Valentino Meacci
  • Dario Russo
  • Riccardo Matera
Conference paper
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 573)

Abstract

Field-Oriented Control (FOC) of hybrid stepper motors allows high performance in motor movements. In FOC, the shaft position is tracked through an encoder (or a similar device), and the stator magnetic field orientation is continuously adjusted to maintain the desired load angle, i.e. the phase between the magnetic fields produced by the stator windings and the rotor magnet. Unfortunately, measuring the load angle with high accuracy is not trivial. For example, in a typical 200 step/turn motor, the electro-mechanical configuration repeats every 7.8°, and a 5% load angle accuracy requires a 5/50 = 0.1% absolute accuracy in the alignment among motor windings and encoder and/or their coupling. When this is not achieved, torque and velocity are affected by oscillations. In this paper a simple solution is proposed where the misalignment errors are mapped with an open-loop motor run, and then compensated during the normal FOC employment. Experiments with a 1.1 Nm, 2-phase, 200-step/turn hybrid stepper motor show how the proposed method reduces the velocity oscillations in a constant torque condition.

Notes

Acknowledgements

This work is part of the MIPEC project (CUP 4421.02102014.072000051), funded by the Tuscany Region government through the FAR-FAS 2014 program. Authors thank Microtest srl (Altopascio, Italy) and the DIEF of the University of Florence (Italy) for their support.

References

  1. 1.
    Athani, V.V.: Stepper Motors: Fundamentals, Applications and Design, New Age Inpernational (P) Ltd, New Delhi, India, reprint. ISBN 978-8122410068 (2005)Google Scholar
  2. 2.
    Gaan, D.R., Kumar, M., Sudhakar, S.: Real-time precise position tracking with stepper motor using frequency modulation based microstepping. IEEE J. Ind. Appl. 54(1), 693–701 (2018).  https://doi.org/10.1109/TIA.2017.2753158CrossRefGoogle Scholar
  3. 3.
    Le, K.M., Hoang, H.V., Jeon, J.W.: An advanced closed-loop control to improve the performance of hybrid stepper motors. IEEE T. Power Electr. 32(9), 7244–7255 (2016).  https://doi.org/10.1109/TPEL.2016.2623341CrossRefGoogle Scholar
  4. 4.
    Kim, W., Yang, C., Chung, C.C.: Design and implementation of simple field-oriented control for permanent magnet stepper motors without DQ transformation. IEEE T Magn. 47(10), 4231–4234 (2011).  https://doi.org/10.1109/TMAG.2011.2157956CrossRefGoogle Scholar
  5. 5.
    Ricci, S., Meacci, V., Birkhofer, B., Wiklund, J.: FPGA-based system for in-line measurement of velocity profiles of fluids in industrial pipe flow. IEEE T Ind. Electron. 64(5), 3997–4005 (2017).  https://doi.org/10.1109/TIE.2016.2645503CrossRefGoogle Scholar
  6. 6.
    Ricci, S., Liard, M., Birkhofer, B., Lootens, D., Brühwiler, A., Tortoli, P.: Embedded doppler system for industrial in-line rheometry. IEEE Trans. Ultrason. Ferroelect. Freq. Contr. 59(7), 1395–1401 (2012).  https://doi.org/10.1109/TUFFC.2012.2340CrossRefGoogle Scholar
  7. 7.
    Ricci, S., Meacci, V.: Simple torque control method for hybrid stepper motors implemented in FPGA. Electr. 7(10), 242 (2018).  https://doi.org/10.3390/electronics7100242CrossRefGoogle Scholar
  8. 8.
    Intel: Intel MAX10 FPGA Device Datasheet. M10-DATASHEET, December 2017. https://www.altera.com/documentation/mcn1397700832153.html
  9. 9.
    STMicroelectronics: PowerStep01 Datasheet. DocID025022 Rev 6, November 2017. http://www.st.com/resource/en/datasheet/powerstep01.pdf

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Stefano Ricci
    • 1
    Email author
  • Valentino Meacci
    • 1
  • Dario Russo
    • 1
  • Riccardo Matera
    • 1
  1. 1.Information Engineering DepartmentUniversity of FlorenceFlorenceItaly

Personalised recommendations