Advertisement

Biorefinery pp 111-151 | Cite as

Upgrading Bio-oil: Catalysis and Refinery

  • Robert M. BaldwinEmail author
Chapter

Abstract

Concerns over climate change coupled with the desire to develop an economy based on renewable and sustainable feedstocks have catalyzed interest in developing pathways and technologies for production of bio-based energy and bio-based products. Biomass utilization plays an important role in this picture since biomass is the only renewable energy source that can offer a direct (e.g., drop-in) replacement for fossil-based transportation fuels in the near to mid term. The United States alone has the capacity to produce more than one billion tons of sustainable biomass, which can be used to produce transportation fuels with dramatically reduced carbon footprints, bio-based chemicals to replace petroleum-derived analogs, and renewable electrical power. A bio-based economy can serve to create new economic opportunities and jobs while simultaneously reducing future climate impacts.

Pyrolysis represents an important conversion pathway for accomplishing this goal. Pyrolysis is a central technology for biomass deconstruction and fractionation which generates intermediates for upgrading to fuels, fuel intermediates, and fuel blendstocks by catalytic and biological means. Depending on the exact pathway and end use, biomass conversion routes employing pyrolysis may be less capital intensive than alternate schemes and have the additional advantage of high throughputs and moderate operating conditions (temperature and pressure). Bio-oil derived by fast pyrolysis of biomass represents a potentially attractive source of transportation fuels and high-value chemical intermediates that can help accelerate progress toward the renewable and sustainable bio-economy of the future.

In this chapter we will capture recent advances in biomass pyrolysis and bio-oil production and utilization. The focus is on use of biomass pyrolysis to produce intermediates that can be upgraded to transportation fuels. Upgrading strategies including in situ and ex situ catalytic fast pyrolysis are reviewed along with integration of bio-oil in conventional petroleum refineries. The impact of biomass-derived oxygenates on fuel properties is also reviewed.

Keywords

Bio-oil Pyrolysis oil Bio-oil upgrading Bio-oil hydrotreating Bio-oil integration 

References

  1. Abdullah Z (n.d.) Upgrading of biomass fast pyrolysis oil (Biooil), DOE Bioenergy Technology Office (BETO) 2015 peer review. https://www.energy.gov/sites/prod/files/2015/04/f21/thermochemical_conversion_abdullah_231401.pdf
  2. Abdullah N, Gerhauser H (2008) Bio-oil derived from empty fruit bunches. Fuel 87:2606–2613CrossRefGoogle Scholar
  3. Abdullah N, Gerhauser H, Sulaiman F (2010) Fast pyrolysis of empty fruit bunches. Fuel 89:2166–2169CrossRefGoogle Scholar
  4. Agblevor FA, Chum HL, Johnson DK (1992) Compositional analysis of NIST biomass standards from the IEA whole feedstock round Robin, energy from biomass and wastes XVI: proceedings of the Institute of Gas Technology Conference, Orlando, Florida, 2–6 March 1992, pp 395–421Google Scholar
  5. Agblevor FA, Mante O, Abdoulmoumine N, McClung R (2010) Production of stable biomass pyrolysis oils using fractional catalytic pyrolysis. Energy Fuel 24:4087–4089CrossRefGoogle Scholar
  6. Agblevor FA, Mante O, McClung R, Oyama ST (2012) Co-processing of standard gas oil and biocrude oil to hydrocarbon fuels. Biomass Bioenergy 45:130–137CrossRefGoogle Scholar
  7. Agblevor FA, Elliott DC, Santosa DM, Olarte MV, Burton SD, Swita M, Beis SH, Christian K, Sargent B (2016) Red mud catalytic pyrolysis of pinyon juniper and single-stage hydrotreatment of oils. Energy Fuel 30:7947–7958CrossRefGoogle Scholar
  8. Anthrop DF (2013) Gasoline from trees. Oil Gas J 111(1):18Google Scholar
  9. Antonakou E, Lappas A, Nilsen MH, Bouzga A, Stöcker M (2006) Evaluation of various types of Al-MCM-41 materials as catalysts in biomass pyrolysis for the production of bio-fuels and chemicals. Fuel 85:2202–2212CrossRefGoogle Scholar
  10. Arbogast S, Bellman D, Paynter D, Wykowski J, Baldwin RM (2017a) Integration of pyrolysis oil in petroleum refineries, part I hydrocarbon processingGoogle Scholar
  11. Arbogast S, Bellman D, Paynter D, Wykowski J, Baldwin RM (2017b) Integration of pyrolysis oil in petroleum refineries, part II hydrocarbon processingGoogle Scholar
  12. Asadieraghi M, Ashri Wan Daud WM, Abbas HF (2015) Heterogeneous catalysts for advanced bio-fuel production through catalytic biomass pyrolysis vapor upgrading: a review. RSC Adv 5(28):22234–22255CrossRefGoogle Scholar
  13. Aubin H, Roy C (1980) Study on the corrosiveness of wood pyrolysis oils. Fuel Sci Technol Int 8:77–86CrossRefGoogle Scholar
  14. Azeez AM, Meier D, Odermatt J, Willner T (2010) Fast pyrolysis of African and European lignocellulosic biomasses using Py-GC/MS and fluidized bed reactor. Energy Fuel 24:2078–2085CrossRefGoogle Scholar
  15. Baker EG, Elliott DC (1988) Research in thermochemical biomass conversion. Elsevier Science, Barking, p 883CrossRefGoogle Scholar
  16. Baldwin RM, Feik CJ (2013) Bio-oil stabilization and upgrading by hot gas filtration. Energy Fuel 27:3224–3238CrossRefGoogle Scholar
  17. Bezergianni S, Dimitriadis A, Kikhtyanin O, Kubicka D (2018) Refinery co-processing of renewable feeds. Prog Energy Combust Sci 68:29–64CrossRefGoogle Scholar
  18. BIOCOUP (2011) Publishable final activity report. VTT, EspooGoogle Scholar
  19. Boateng AA, Daugaard DE, Goldberg NM, Hicks KB (2007) Bench-scale fluidized-bed pyrolysis of switchgrass for bio-oil production†. Ind Eng Chem Res 46:1891–1897CrossRefGoogle Scholar
  20. Boonyasuwat S, Omotoso T, Resasco DE, Crossley SP (2013) Conversion of guaiacol over supported Ru catalysts. Catal Lett 143:783–791CrossRefGoogle Scholar
  21. Bridgwater AV (2003) Renewable fuels and chemicals by thermal processing of biomass. Chem Eng J 91:87–102CrossRefGoogle Scholar
  22. Budhi S, Mukarakate C, Iisa K, Pylypenko S, Ciesielski PN, Yung MM, Donohoe BS, Katahira R, Nimlos MR, Trewyn BG (2015) Molybdenum incorporated mesoporous silica catalyst for production of biofuels and value-added chemicals via catalytic fast pyrolysis. Green Chem 17:3035–3046CrossRefGoogle Scholar
  23. Bui VN, Toussaint G, Laurenti D, Mirodatos C, Geantet C (2009) Co-processing of pyrolysis bio oils and gas oil for new generation of bio-fuels: hydrodeoxygenation of guaiacol and SRGO mixed feed. Catal Today 143:172–178CrossRefGoogle Scholar
  24. Bui VN, Laurenti D, Delichere P, Geantet C (2011) Hydrodeoxygenation of guaiacol: part II: support effect for CoMoS catalysts on HDO activity and selectivity. Appl Catal B 101:246–255CrossRefGoogle Scholar
  25. Bulushev DA, Ross JRH (2011) Catalysis for conversion of biomass to fuels via pyrolysis and gasification: a review. Catal Today 171(1):1–13CrossRefGoogle Scholar
  26. Butler E, Devlin G, Meier D, McDonnell K (2011) A review of recent laboratory research and commercial developments in fast pyrolysis and upgrading. Renew Sust Energ Rev 15:4171–4186CrossRefGoogle Scholar
  27. Carlson TR, Tompsett GA, Conner WC, Huber GW (2009) Aromatic production from catalytic fast pyrolysis of biomass-derived feedstocks. Top Catal 52:241CrossRefGoogle Scholar
  28. Chang CD, Lang WH, Silvestri AJ (1976) US patent 3,998,898. Accessed 21 Dec 1976Google Scholar
  29. Chen NY, Walsh DE, Koenig LR (1988) Fluidized-bed upgrading of wood pyrolysis liquids and related-compounds. In: Pyrolysis liquids from biomass, ACS symposium series: American Chemical Society, pp 264–275Google Scholar
  30. Chen S-F, Mowery RA, Scarlata CJ, Chambliss K (2007) Compositional analysis of water-soluble materials in corn stover. J Agric Food Chem 55:5912–5918CrossRefGoogle Scholar
  31. Chen S-F, Mowery RA, Sevcik RS, Scarlata CJ, Chambliss CK (2010) Compositional analysis of water-soluble materials in switchgrass. J Agric Food Chem 58:3251–3258CrossRefGoogle Scholar
  32. Christensen ED, Chupka GM, Luecke J, Smurthwaite T, Alleman TL, Iisa K, Franz JA, Elliott DC, McCormick RL (2011a) Analysis of oxygenated compounds in hydrotreated biomass fast pyrolysis oil distillate fractions. Energy Fuel 25:5462–5471CrossRefGoogle Scholar
  33. Christensen E, Yanowitz J, Ratcliff M, McCormick RL (2011b) Renewable oxygenate blending effects on gasoline properties. Energy Fuel 25:4723–4733CrossRefGoogle Scholar
  34. Ciesla U, Schuth F (1999) Ordered mesoporous materials. Microporous Mesoporous Mater 27:131–149CrossRefGoogle Scholar
  35. Czernik S (1994) Storage of biomass pyrolysis oils. In: Proceedings from biomass pyrolysis oil: properties and combustion, Estes Park, CO, 26–28 September 1994, NREL CP-430-7215, pp 67–76Google Scholar
  36. Czernik S, Bridgwater AV (2004) Overview of applications of biomass fast pyrolysis oil. Energy Fuel 18:590–598CrossRefGoogle Scholar
  37. Darmstadt H, Garcia-Perez M, Adnot A, Chaala A, Kretschmer D, Roy C (2004) Corrosion of metals by bio-oil obtained by vacuum pyrolysis of softwood bark residues. An X-ray photoelectron spectroscopy and auger electron spectroscopy study. Energy Fuels 18:1291–1301CrossRefGoogle Scholar
  38. Das P, Sreelatha T, Ganesh A (2004) Bio oil from pyrolysis of cashew nut shell-characterisation and related properties. Biomass Bioenergy 27:265–275CrossRefGoogle Scholar
  39. Davidsson KO, Stojkova BJ, Pettersson J (2002) Alkali emission from birchwood particles during rapid pyrolysis. Energy Fuel 16:1033–1039CrossRefGoogle Scholar
  40. De Almeida MBB (2008) MSc thesis. Federal University of Rio de JaneiroGoogle Scholar
  41. de Miguel Mercader F, Groeneveld MJ, Kersten SRA, Geantet C, Toussaint G, Way NW, Schaverien CJ, Hogendoorn KJA (2011) Hydrodeoxygenation of pyrolysis oil fractions: process understanding and quality assessment through co-processing in refinery units. Energy Environ Sci 4:985–997CrossRefGoogle Scholar
  42. de Souza PM, Nie L, Borges LEP, Noronha FB, Resasco DE (2014) Role of oxophilic supports in the selective hydrodeoxygenation of m-cresol on Pd catalysts. Catal Lett 144:2005–2011CrossRefGoogle Scholar
  43. Diebold JP (2000), A review of the chemical and physical mechanisms of the storage stability of fast pyrolysis bio-oils. NREL Report, SR-570-27613, pp 1–59Google Scholar
  44. Diebold J, Scahill J (1988) Biomass to gasoline—upgrading pyrolysis vapors to aromatic gasoline with zeolite catalysis at atmospheric pressure. In: Soltes EJ, Milne TA (eds) Pyrolysis oils from biomass, producing, analyzing, and upgrading. American Chemical Society, Washington, DC, pp 264–276CrossRefGoogle Scholar
  45. Diebold JP, Scahill JW, Czernik S, Phillips SD, Feik CJ (1995) Progress in the production of hot-gas filtered biocrude oil at NREL. NREL technical report, pp 1–16Google Scholar
  46. Domine ME, van Veen AC, Schuurman Y, Mirodatos C (2008) Coprocessing of oxygenated biomass compounds and hydrocarbons for the production of sustainable fuel. ChemSusChem 1:179–181CrossRefGoogle Scholar
  47. Donar YO, Sinag A (2016) Catalytic effect of tin oxide nanoparticles on cellulose pyrolysis. J Anal Appl Pyrolysis 119:69–74CrossRefGoogle Scholar
  48. Doornkamp C, Ponec V (2000) The universal character of the Mars and Van Krevelen mechanism. J Mol Catal A Chem 162:19–32CrossRefGoogle Scholar
  49. Elliott DC (1994) Water, alkali and char in flash pyrolysis oils. Biomass Bioenergy 7:179–185CrossRefGoogle Scholar
  50. Elliott DC (2007) Historical developments in hydroprocessing bio-oils. Energy Fuel 21:1792–1815CrossRefGoogle Scholar
  51. Elliott DC, Hart TR, Neuenschwander GG, Rotness LJ, Olarte MV, Zacher AH, Solantausta Y (2012) Catalytic hydroprocessing of fast pyrolysis bio-oil from pine sawdust. Energy Fuel 26:3891–3896CrossRefGoogle Scholar
  52. Elliott DC, Wang H, French R, Deutch S, Iisa K (2014) Hydrocarbon liquid production from biomass via hot-vapor-filtered fast pyrolysis and catalytic hydroprocessing of the bio-oil. Energy Fuel 28:5909–5917CrossRefGoogle Scholar
  53. U.S. Environmental Protection Agency (2007) Control of hazardous air pollutants from mobile sources. Fed Regist, 72(37):8428–8570Google Scholar
  54. Evans R, Milne T (1987) Molecular characterization of the pyrolysis of biomass 1. Energy Fuel 1:123–137CrossRefGoogle Scholar
  55. Evans RJ, Milne TA (1988) Molecular-beam, mass-spectrometric studies of wood vapor and model compounds over an HZSM—5 catalyst. In: Soltes EJ, Milne TA (eds) Pyrolysis oils from biomass, producing, analyzing, and upgrading. American Chemical Society, Washington, DC, pp 311–327CrossRefGoogle Scholar
  56. Fogassy G, Thegarid N, Toussaint G, van Veen AC, Schuurman Y, Mirodatos C (2010) Biomass derived feedstock co-processing with vacuum gas oil for second-generation fuel production in FCC units. Appl Catal B Environ 96:476–485CrossRefGoogle Scholar
  57. Fogassy G, Thegarid N, Schuurman Y, Mirodatos C (2011) From biomass to bio-gasoline by FCC co-processing: effect of feed composition and catalyst structure on product quality. Energy Environ Sci 4:5068CrossRefGoogle Scholar
  58. Fogassy G, Thegarid N, Schuurman Y, Mirodatos C (2012) The fate of bio-carbon in FCC co-processing products. Green Chem 14:1367CrossRefGoogle Scholar
  59. French RJ, Stunkel J, Black S, Myers M, Yung MM, Iisa K (2014) Evaluate impact of catalyst type on oil yield and hydrogen consumption from mild hydrotreating. Energy Fuel 28:3086–3095CrossRefGoogle Scholar
  60. Fuleki D (1999) Bio-fuel system material testing. PyNE Newsletter, Issue no. 7. Aston University, Bio-Energy Research Group, BirminghamGoogle Scholar
  61. Furimsky E (2000) Catalytic hydrodeoxygenation. Appl Catal A 199:147–190CrossRefGoogle Scholar
  62. Gao D, Schweitzer C, Hwang HT, Varma A (2014) Conversion of guaiacol on noble metal catalysts: reaction performance and deactivation studies. Ind Eng Chem Res 53:18658–18667CrossRefGoogle Scholar
  63. Garcìa-Pérez M, Chaala A, Pakdel H, Kretschmer D, Rodrigue D, Roy C (2006) Multiphase structure of bio-oils. Energy Fuel 20:364–375CrossRefGoogle Scholar
  64. Garcìa-Pérez M, Chaala A, Pakdel H, Kretschmer D, Roy C (2007) Characterization of bio-oils in chemical families. Biomass Bioenergy 31:222–242CrossRefGoogle Scholar
  65. Graca I, Ribeiro FR, Cerqueira HS, Lam YL, de Almeida MBB (2009) Catalytic cracking of mixtures of model bio-oil compounds and gasoil. Appl Catal B Environ 90:556–563CrossRefGoogle Scholar
  66. Grange P, Laurent E, Maggi R, Centeno A, Delmon B (1996) Hydrotreatment of pyrolysis oils from biomass: reactivity of the various categories of oxygenated compounds and preliminary techno-economical study. Catal Today 29:297–301CrossRefGoogle Scholar
  67. Green Goods and Services (GGS) (2013) Bureau of Labor Statistics U.S. Department of LaborGoogle Scholar
  68. Hayes DJ, Hayes MHB (2009) The role that lignocellulosic feedstocks and various biorefining technologies can play in meeting Ireland’s biofuel targets. Biofuels Bioprod Biorefin 3:500–520CrossRefGoogle Scholar
  69. He Z, Wang X (2012) Hydrodeoxygenation of model compounds and catalytic systems for pyrolysis bio-oils upgrading. Catal Sustain Energy 1:28–52Google Scholar
  70. Horne PA, Williams PT (1995) The effect of zeolite ZSM-5 catalyst deactivation during the upgrading of biomass-derived pyrolysis vapours. J Anal Appl Pyrol 34:65–85CrossRefGoogle Scholar
  71. Howe D, Westover T, Carpenter D, Santosa D, Emerson R, Deutch S, Starace A, Kutnyakov I, Lukins C (2015) Field-to-fuel performance testing of lignocellulosic feedstocks: an integrated study of the fast pyrolysis–hydrotreating pathway. Energy Fuel 29:3188–3197CrossRefGoogle Scholar
  72. Iisa K, French RJ, Orton KA, Dutta A, Schaidle JA (2017) Production of low-oxygen bio-oil via ex situ catalytic fast pyrolysis and hydrotreating. Fuel 207:413–422CrossRefGoogle Scholar
  73. Iisa K, Robichaud DJ, Watson MJ, ten Dam J, Dutta A, Mukarakate C, Kim S, Nimlos MR, Baldwin RM (2018) Improving biomass pyrolysis economics by integrating vapor and liquid phase upgrading. Green Chem 20:567CrossRefGoogle Scholar
  74. Ingram L, Mohan D, Bricka M, Steele P, Strobel D, Crocker D, Mitchell B, Mohammad J, Cantrell K, Pittman CUJ (2008) Pyrolysis of wood and bark in an auger reactor: physical properties and chemical analysis of the produced bio-oils. Energy Fuel 22:614–625CrossRefGoogle Scholar
  75. Jae J, Tompsett GA, Foster AJ, Hammond KD, Auerbach SM, Lobo RF, Huber GW (2011) Investigation into the shape selectivity of zeolite catalysts for biomass conversion. J Catal 279:257–268CrossRefGoogle Scholar
  76. Jay DC, Rantanen O Sipilä K, Nylund NO (1995) Wood pyrolysis oil for diesel engines. In: Proceedings of the 1995 fall technical conference, Milwaukee, Wisconsin, 24–27 Sept 1995. ASME, Internal Combustion Engine Division, New YorkGoogle Scholar
  77. Jensen PA, Frandsen FJ, Dam-Johansen K, Sander B (2000) Experimental investigation of the transformation and release to gas phase of potassium and chlorine during straw pyrolysis. Energy Fuel 14:1280–1285CrossRefGoogle Scholar
  78. Johnson DK, Adam P, Ashley P, Chum H, Deutch S, Fennell J, Wiselogel A (1993) Study of compositional changes in biomass feedstocks upon storage (results), storage and drying of woody biomass: proceedings of the international energy agency/bioenergy agreement task IX activity 5 workshop, New Brunswick, Canada, May 19, 1993. Swedish University of Agricultural Sciences, Department of Forest Products, New Brunswick, pp 28–52Google Scholar
  79. Jones SB, Tan E, Jacobson I, Meyer P, Dutta A, Cafferty K, Snowden-Swan L, Padmaperuma A (2013) Process design and economics for the conversion of lignocellulosic biomass to hydrocarbon fuels. Fast pyrolysis and hydrotreating bio-oil pathway. U. S. Department of Energy, Washington, DCGoogle Scholar
  80. Keiser JR (2013) Bioenergy technology. Office of the Department of Energy Program Review, Washington, DCGoogle Scholar
  81. Khalek I, Jetter J (2012) Effect of commercially available gasoline fuels properties on particle emissions from a 2010 vehicle equipped with gasoline direct injection engine. In: 22nd CRC real world emissions workshop, San Diego, CA, 2012Google Scholar
  82. Knudsen JN, Jensen PA, Dam-Johansen K (2004) Transformation and release to the gas phase of Cl, K, and S during combustion of annual biomass. Energy Fuel 18:1385–1399CrossRefGoogle Scholar
  83. Lappas AA, Samolada MC, Iatridis DK, Voutetakis S, Vasalos IA (2002) Biomass pyrolysis in a circulating fluid bed reactor for the production of fuels and chemicals. Fuel 81:2087–2095CrossRefGoogle Scholar
  84. Lappas AA, Bezergianni S, Vasalos IA (2009) Production of biofuels via co-processing in conventional refining processes. Catal Today 145:55–62CrossRefGoogle Scholar
  85. Lee WS, Wang ZS, Wu RJ, Bhan A (2014) Selective vapor-phase hydrodeoxygenation of anisole to benzene on molybdenum carbide catalysts. J Catal 319:44–53CrossRefGoogle Scholar
  86. Lee W-S, Kumar A, Wang Z, Bhan A (2015) Chemical titration and transient kinetic studies of site requirements in Mo2C-catalyzed vapor phase anisole hydrodeoxygenation. ACS Catal 5:4104–4114CrossRefGoogle Scholar
  87. Liu C, Wang H, Karim AM, Sun J, Wang Y (2014) Catalytic fast pyrolysis of lignocellulosic biomass. Chem Soc Rev 43(22):7594–7623CrossRefGoogle Scholar
  88. Lu Q, Xiong WM, Li WZ, Guo QX, Zhu XF (2009) Catalytic pyrolysis of cellulose with sulfated metal oxides: a promising method for obtaining high yield of light furan compounds. Bioresour Technol 100:4871–4876CrossRefGoogle Scholar
  89. Lu Q, Zhang Y, Tang Z, Li W-z, Zhu X-f (2010) Catalytic upgrading of biomass fast pyrolysis vapors with titania and zirconia/titania based catalysts. Fuel 89:2096–2103CrossRefGoogle Scholar
  90. Ma Z, van Bokhoven J (2014) Thermal conversion of biomass–pyrolysis and hydrotreating. Catalysis 26:249–272CrossRefGoogle Scholar
  91. Mante OD, Agblevor FA (2014) Catalytic pyrolysis for the production of refinery-ready biocrude oils from six different biomass sources. Green Chem 16:3364–3377CrossRefGoogle Scholar
  92. Mante OD, Rodriguez JA, Senanayake SD, Babu SP (2015) Catalytic conversion of biomass pyrolysis vapors into hydrocarbon fuel precursors. Green Chem 17:2362. 60CrossRefGoogle Scholar
  93. Marker L (2005) Opportunities for biorenewables in oil refineries: final technical report (DE-FG36-05GO15085). US Department of EnergyGoogle Scholar
  94. Martín-Aranda RM, Čejka J (2010) Recent advances in catalysis over mesoporous molecular sieves. Top Catal 53(3):141–153CrossRefGoogle Scholar
  95. McCarthy JE, Tiemann M (2006) MTBE in gasoline: clean air and drinking water issues, congressional research service reports. Paper 26. http://digitalcommons.unl.edu/crsdocs/26
  96. Meier D (1999) New methods for chemical and physical characterization and round robin testing. In: Bridgwater AV, Czernik S, Diebold J, Meier D, Oasmaa A, Peacocke C, Piskorz J, Radlein D (eds) Fast pyrolysis of biomass: a handbook, pp 92–101Google Scholar
  97. Meier D, Scholtze B (1997) Fast pyrolysis liquid characteristics. In: Kaltschmitt M, Bridgwater AV (eds) Biomass gasification and pyrolysis, state of the art and future prospects. CPL Scientific, Newbury, pp 431–441Google Scholar
  98. Melero JA, Iglesias J, Garcia A (2012) Biomass as renewable feedstock in standard refinery units. Feasibility, opportunities and challenges. Energy Environ Sci 5:7393CrossRefGoogle Scholar
  99. Mercader FD, Groeneveld MJ, Kersten SRA, Way NWJ, Schaverien CJ, Hogendoorn JA (2010) Production of advanced biofuels: co-processing of upgraded pyrolysis oil in standard refinery units. Appl Catal B Environ 96:57–66CrossRefGoogle Scholar
  100. Mercader FD, Groeneveld MJ, Kersten SRA, Geantet C, Toussaint G, Way NWJ, Schaverien CJ, Hogendoorn KJA (2011) Hydrodeoxygenation of pyrolysis oil fractions: process understanding and quality assessment through co-processing in refinery units. Energy Environ Sci 4:985–997CrossRefGoogle Scholar
  101. Mukarakate C, Zhang X, Stanton AR, Robichaud DJ, Ciesielski PN, Malhotra K, Donohoe BS, Gjersing E, Evans RJ, Heroux DS, Richards R, Iisa K, Nimlos MR (2014) Real-time monitoring of the deactivation of HZSM-5 during upgrading of pine pyrolysis vapors. Green Chem 16:1444–1461CrossRefGoogle Scholar
  102. Mullen CA, Boateng AA (2013) Accumulation of inorganic impurities on HZSM-5 zeolites during catalytic fast pyrolysis of switchgrass. Ind Eng Chem Res 52:17156–17161CrossRefGoogle Scholar
  103. Mullen CA, Boateng AA, Goldberg NM, Lima IM, Laird DA, Hicks KB (2010) Bio-oil and bio-char production from corn cobs and stover by fast pyrolysis. Biomass Bioenergy 34:67–74CrossRefGoogle Scholar
  104. Murugappan K, Mukarakate C, Budhi S, Shetty M, Nimlos M, Roman-Leshkov Y (2016) Supported molybdenum oxides as effective catalysts for the catalytic fast pyrolysis of lignocellulosic biomass. Green Chem 18:5548–5557CrossRefGoogle Scholar
  105. Nolte MW, Zhang J, Shanks BH (2016) Ex situ hydrodeoxygenation in biomass pyrolysis using molybdenum oxide and low pressure hydrogen. Green Chem 18(1):134–138CrossRefGoogle Scholar
  106. Nowakowski DJ, Jones JM, Brydson RMD, Ross AB (2007) Potassium catalysis in the pyrolysis behaviour of short rotation willow coppice. Fuel 86:2389–2402CrossRefGoogle Scholar
  107. NREL poplar bio-oil composition (n.d.)Google Scholar
  108. Oasmaa A, Kuoppala E (2003) Fast pyrolysis of forestry residue. 3. Storage stability of liquid fuel. Energy Fuel 17:1075–1084CrossRefGoogle Scholar
  109. Oasmaa A, Meier D (1999) Analysis, characterization and test methods of fast pyrolysis liquids. In: Proceeding of biomass a growth opportunity in green energy and value-added products biomass a growth opportunity in green energy and value-added products, at proceedings of the 4th biomass conference of the Americas, Oakland, CA, II, pp 1229–1234Google Scholar
  110. Oasmaa A, Meier D (2005) Norms and standards for fast pyrolysis liquids: 1. Round robin test. J Anal Appl Pyrol 73:323–334CrossRefGoogle Scholar
  111. Oasmaa A, Peacocke C (2001) A guide to physical property characterisation of biomass—derived fast pyrolysis liquids, vol 450. VTT, Espoo, pp 1–102Google Scholar
  112. Oasmaa A, Peacocke C (2010) Properties and fuel use of biomass-derived fast pyrolysis liquids. A guide, vol 731. VTT, Espoo, pp 1–134Google Scholar
  113. Oasmaa A, Sipilä K (1996) Pyrolysis oil properties: use of pyrolysis oil as fuel in medium-speed diesel engines. In: Bio-oil production and utilization, conference proceedings, pp 175–185Google Scholar
  114. Oasmaa A, Leppamaki E, Koponen P, Levander J, Tapola E (1997) Physical characterisation of biomass-based pyrolysis liquids, vol 306. VTT, Espoo, pp 1–87Google Scholar
  115. Oasmaa A, Kuoppala E, Gust S, Solantausta Y (2003a) Fast pyrolysis of forestry residue. 1. Effect of extractives on phase separation of pyrolysis liquids. Energy Fuel 17:1–12CrossRefGoogle Scholar
  116. Oasmaa A, Kuoppala E, Solantausta Y (2003b) Fast pyrolysis of forestry residue. 2. Physicochemical composition of product liquid. Energy Fuel 17:433–443CrossRefGoogle Scholar
  117. Oasmaa A, Solantausta Y, Arpiainen V, Kuoppala E, Sipilä K (2010a) Fast pyrolysis bio-oils from wood and agricultural residues. Energy Fuel 24:1380–1388CrossRefGoogle Scholar
  118. Oasmaa A, Elliott DC, Korhonen J (2010b) Acidity of biomass fast pyrolysis bio-oils. Energy Fuel 24:6548–6554CrossRefGoogle Scholar
  119. Olarte MV, Zacher AH, Padmaperuma AB, Burton D, Job HM, Lemmon TL, Swita MS, Rotness LJ, Neuenschwander GN, Frye JG, Elliott DC (2016) Stabilization of softwood-derived pyrolysis oils for continuous bio-oil hydroprocessing. Top Catal 59:55–64CrossRefGoogle Scholar
  120. Paasikallio V, Lindfors C, Kuoppala E, Solantausta Y, Oasmaa A, Lehto J, Lehtonen J (2014) Product quality and catalyst deactivation in a four day catalytic fast pyrolysis production run. Green Chem 16:3549–3559CrossRefGoogle Scholar
  121. Patwardhan PR, Satrio JA, Brown RC, Shanks BH (2010) Influence of inorganic salts on the primary pyrolysis products of cellulose. Bioresour Technol 101:4646–4655CrossRefGoogle Scholar
  122. Perego C, Bosetti A (2011) Biomass to fuels: the role of zeolite and mesoporous materials. Microporous Mesoporous Mater 144(1–3):28–39CrossRefGoogle Scholar
  123. Peyton K (2002) Nalco fuel field manual, Revised ed. McGrawHill, New YorkGoogle Scholar
  124. Pinheiro A, Hudebine D, Dupassieux N, Geantet C (2009) Impact of oxygenated compounds from lignocellulosic biomass pyrolysis oils on gas oil hydrotreatment. Energy Fuel 23:1007–1014CrossRefGoogle Scholar
  125. Pinheiro A, Dupassieux N, Hudebine D, Geantet C (2011) Impact of the presence of carbon monoxide and carbon dioxide on gas oil hydrotreatment: investigation on liquids from biomass cotreatment with petroleum cuts. Energy Fuel 25:804–812CrossRefGoogle Scholar
  126. Pinho AD, Ramos JA, Leite LF (2011) US patent 7,867,378 B2, 11 Jan 2011Google Scholar
  127. Pinho AR, Almeida M, Mendes FL, Casavechia LC, Talmadge MS, Kinchin CM, Chum HL (2017) Fast pyrolysis oil from pinewood chips co-processing with vacuum gas oil in a FCC unit for second generation fuel production. Fuel 188:462–473CrossRefGoogle Scholar
  128. Piskorz J, Scott DS, Radlein D (1988) Composition of oils obtained by fast pyrolysis of different woods. In: Soltes EJ, Milne TA (eds) Pyrolysis oils from biomass: producing, analyzing, and upgrading, ACS symposium series, vol 376. ACS, Washington, DC, pp 167–178CrossRefGoogle Scholar
  129. Pootakham T, Kumar A (2010) Bio-oil transport by pipeline: a techno-economic assessment. Bioresour Technol 101:7137–7143CrossRefGoogle Scholar
  130. Prasomsri T, Nimmanwudipong T, Román-Leshkov Y (2013) Effective hydrodeoxygenation of biomass-derived oxygenates into unsaturated hydrocarbons by MoO3 using low H2 pressures. Energy Environ Sci 6:1732–1738CrossRefGoogle Scholar
  131. Prasomsri T, Shetty M, Murugappan K, RománLeshkov Y (2014) Insights into the catalytic activity and surface modification of MoO3 during the hydrodeoxygenation of lignin-derived model compounds into aromatic hydrocarbons under low hydrogen pressures. Energy Environ Sci 7:2660–2669CrossRefGoogle Scholar
  132. Production Statistics (2012) National Biodiesel BoardGoogle Scholar
  133. Qu T, Guo W, Shen L, Xiao J, Zhao K (2011) Experimental study of biomass pyrolysis based on three major components: hemicellulose, cellulose, and lignin. Ind Eng Chem Res 50:10424–10433CrossRefGoogle Scholar
  134. Rezaei PS, Shafaghat H, Daud WMAW (2014) Production of green aromatics and olefins by catalytic cracking of oxygenate compounds derived from biomass pyrolysis: a review. Appl Catal A Gen 469:490–511CrossRefGoogle Scholar
  135. Richards E (2013) Careers in biofuels. U.S. Bureau of Labor Statistics, Washington, DCGoogle Scholar
  136. Ruddy DA, Schaidle JA, Ferrell Iii JR, Wang J, Moens L, Hensley JE (2014) Recent advances in heterogeneous catalysts for bio-oil upgrading via “ex situ catalytic fast pyrolysis”: catalyst development through the study of model compounds. Green Chem 16(2):454–490CrossRefGoogle Scholar
  137. Samolada M, Baldauf W, Vasalos I (1998) Production of a bio-gasoline by upgrading biomass flash pyrolysis liquids via hydrogen processing and catalytic cracking. Fuel 77:1667–1675CrossRefGoogle Scholar
  138. Scott D, Piskorz J (1982) The flash pyrolysis of aspen poplar wood. Can J Chem Eng 60:666–674CrossRefGoogle Scholar
  139. Scott D, Piskorz J (1984) The continuous flash pyrolysis of biomass. Can J Chem Eng 62:404–412CrossRefGoogle Scholar
  140. Scott D, Piskorz J, Radlein D (1985) Liquid products from the continuous flash pyrolysis of biomass. Ind Eng Chem Proc Des Dev 24:581–588CrossRefGoogle Scholar
  141. Shah A, Darr MJ, Dalluge D, Medic D, Webster K, Brown RC (2012) Physicochemical properties of bio-oil and biochar produced by fast pyrolysis of stored single-pass corn stover and cobs. Bioresour Technol 125:348–352CrossRefGoogle Scholar
  142. Shetty M, Murugappan K, Prasomsri T, Green WH, Román-Leshkov Y (2015) Reactivity and stability investigation of supported molybdenum oxide catalysts for the hydrodeoxygenation (HDO) of m-cresol. J Catal 331:86–97CrossRefGoogle Scholar
  143. Singerman GM (1981) Methyl aryl ethers from coal liquids as gasoline extenders and octane improvers. SAE International, WarrendaleGoogle Scholar
  144. Soltes EJ, Lin J-CK (1984) Hydroprocessing of biomass tars for liquid engine fuels. In: Tillman DA, Jahn EC (eds) Progress in biomass conversion. Academic Press, New York, pp 1–69Google Scholar
  145. Speight JG (1991) The chemistry and technology of petroleum, 2nd edn. Marcel-Dekker, New YorkGoogle Scholar
  146. Sullivan MM, Bhan A (2016) Acetone hydrodeoxygenation over bifunctional metallic–acidic molybdenum carbide catalysts. ACS Catal 6:1145–1152CrossRefGoogle Scholar
  147. Sullivan MM, Held JT, Bhan A (2015) Structure and site evolution of molybdenum carbide catalysts upon exposure to oxygen. J Catal 326:82–91CrossRefGoogle Scholar
  148. Sullivan MM, Chen C-J, Bhan A (2016) Catalytic deoxygenation on transition metal carbide catalysts. Cat Sci Technol 6:602–616CrossRefGoogle Scholar
  149. Suzuki K, Aoyagi Y, Katada N, Choi M, Ryoo R, Niwa M (2008) Acidity and catalytic activity of mesoporous ZSM-5 in comparison with zeolite ZSM-5, Al-MCM-41 and silica–alumina. Catal Today 132:38–45CrossRefGoogle Scholar
  150. Taarning E, Osmundsen CM, Yang X, Voss B, Andersen SI, Christensen CH (2011) Zeolite-catalyzed biomass conversion to fuels and chemicals. Energy Environ Sci 4(3):793–804CrossRefGoogle Scholar
  151. Talmadge MS, Baldwin RM, Biddy MJ, McCormick RL, Beckham GT, Ferguson GA, Czernik S, Magrini-Bair KA, Foust TD, Metelski PD, Hetrick C, Nimlos MR (2014) A perspective on oxygenated species in the refinery integration of pyrolysis oil. Green Chem 16(2):407–453CrossRefGoogle Scholar
  152. Thegarid N, Fogassy G, Schuurman Y, Mirodatos C, Stefanidis S, Iliopoulou EF, Kalogiannis K, Lappas AA (2014) Second-generation biofuels by co-processing catalytic pyrolysis oil in FCC units. Appl Catal B Environ 145:161–166CrossRefGoogle Scholar
  153. Turriff SL (2014) Pulp and Paper Canada 115(3):11–13Google Scholar
  154. Urbanchuk JM (2012) Contribution of the ethanol industry to the economy of the United States. Cardno Entrix, New CastleGoogle Scholar
  155. US Energy Information Administration (2016) International Energy Outlook 2016. U.S. Energy Information Administration, Washington, DCGoogle Scholar
  156. Vasalos IA, Lappas AA, Kopalidou EP, Kalogiannis KG (2016) Biomass catalytic pyrolysis: process design and economic analysis. Wiley Interdiscip Rev Energy Environ 5:370–383CrossRefGoogle Scholar
  157. Venkatakrishnan VK, Delgass WN, Ribeiro FH, Agrawal R (2015) Oxygen removal from intact biomass to produce liquid fuel range hydrocarbons via fast-hydropyrolysis and vapor-phase catalytic hydrodeoxygenation. Green Chem 17(1):178–183CrossRefGoogle Scholar
  158. von Stackelberg K, Buonocore J, Bhave PV, Schwartz JA (2013) Public health impacts of secondary particulate formation from aromatic hydrocarbons in gasoline. Environ Health 12:19CrossRefGoogle Scholar
  159. Wang Z, McDonald AG, Westerhof RJM, Kersten RA, Cuba-Torres CM, Ha S, Pecha B, Garcia-Perez M (2013a) Effect of cellulose crystallinity on the formation of a liquid intermediate and on product distribution during pyrolysis. J Anal Appl Pyrolysis 100:56–66CrossRefGoogle Scholar
  160. Wang H, Male J, Wang Y (2013b) Recent advances in hydrotreating of pyrolysis bio-oil and its oxygen-containing model compounds. ACS Catal 3:1047–1070CrossRefGoogle Scholar
  161. Wang H, Lee S-J, Olarte MV, Zacher AH (2016) Bio-oil stabilization by hydrogenation over reduced metal catalysts at low temperatures. ACS Sustain Chem Eng 4(10):5533–5545CrossRefGoogle Scholar
  162. Watkins B, Olsen C, Sutovich K, Petti N (2008) New opportunities for co-processing renewable feeds in refinery processes. WR Grace Catalagram 103Google Scholar
  163. Wei XL, Schnell U, Hein K (2005) Behaviour of gaseous chlorine and alkali metals during biomass thermal utilisation. Fuel 84:841–848CrossRefGoogle Scholar
  164. Wiselogel AE, Agblevor FA, Johnson DK, Deutch S, Fennell JA, Sanderson MA (1996) Compositional changes during storage of large round switchgrass bales. Bioresour Technol 56:103–109CrossRefGoogle Scholar
  165. Yu F, Deng S, Chen P, Liu Y, Wan Y, Olson A, Kittelson D, Ruan R (2007) Physical and chemical properties of bio-oils from microwave pyrolysis of corn stover. Appl Biochem Biotechnol 137:957–970Google Scholar
  166. Zacher AH, Olarte MV, Santosa DM, Elliott DC, Jones SB (2014) A review and perspective of recent bio-oil hydrotreating research. Green Chem 16:491–515CrossRefGoogle Scholar
  167. Zheng J-L, Kong Y-P (2010) Spray combustion properties of fast pyrolysis bio-oil produced from rice husk. Energy Convers Manag 51:182–188CrossRefGoogle Scholar
  168. Zhou G, Jensen PA, Le DM, Knudsen NO, Jensen AD (2016) Atmospheric hydrodeoxygenation of biomass fast pyrolysis vapor by MoO3. ACS Sustain Chem Eng 4:5432–5440CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.National Bioenergy CenterNational Renewable Energy LaboratoryGoldenUSA

Personalised recommendations