Advertisement

Quantifying the Effectiveness of First-Hop Redundancy Protocols in IP Networks

  • Paul BourneEmail author
  • Neville Palmer
  • Jan Skrabala
Conference paper
Part of the Lecture Notes in Computer Science book series (LNCS, volume 11189)

Abstract

First hop redundancy protocols are an essential tool for improving the availability of IP networks. Several protocols exist to rapidly configure redundant paths in the event of a link failure but a review of literature provides little guidance on their relative performance. This paper proposes a method for appraising the effectiveness of three common first hop redundancy protocols within IP networks and critically analyses the approach. Results from a typical network topology are presented as well as a discussion around the validity of the results and potential sources of error. Consideration is given to the potential of advanced numerical methods to minimise error, particularly in large scale networks. Recommendations are made regarding the optimal configurations to be used when comparing first hop redundancy protocols, as well as further research required to improve the accuracy of the results obtained.

Keywords

FHRP HSRP GLBP VRRP Network redundancy Gateway protocol Failover Network performance measurement 

References

  1. 1.
    CCNA Routing and Switching Practice and Study Guide: LAN Redundancy. http://www.ciscopress.com/articles/article.asp?p=2204384&seqNum=4. Accessed 19 Apr 2018
  2. 2.
    Pavlik, J., et al: Gateway redundancy protocols. In: 15th IEEE International Symposium on Computational Intelligence and Informatics, pp. 459–464. IEEE, Budapest (2014)Google Scholar
  3. 3.
    YanHua, Z., WeiZhe, M.: The design of cable television IP access network based on hot standby router protocol. In: International Conference on Image Analysis and Signal Processing, pp. 1–4. IASP, Hangzhou (2012)Google Scholar
  4. 4.
    Virtual Router Redundancy Protocol (VRRP) Version 3 for IPv4 and IPv6. https://tools.ietf.org/html/rfc5798. Accessed 19 Apr 2018
  5. 5.
    Oppenheimer, P.: Top-Down Network Design, 3rd edn. Cisco Press, Indianapolis (2011)Google Scholar
  6. 6.
    Hot Standby Router Protocol Features and Functionality. https://www.cisco.com/c/en/us/support/docs/ip/hot-standby-router-protocol-hsrp/9281-3.html. Accessed 19 Apr 2018
  7. 7.
    Cisco: First Hop Redundancy Protocols Configuration Guide, Cisco IOS Release 12.2SX. Cisco, San Jose (2011)Google Scholar
  8. 8.
  9. 9.
    First Hop Redundancy Protocols Configuration Guide, Cisco IOS Release 15SY. https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/15-sy/fhp-15-sy-book/fhp-vrrp.html. Accessed 19 Apr 2018
  10. 10.
  11. 11.
    Ibrahimi, M., et al.: Deploy redundancy of internet using first hop redundancy protocol and monitoring it using IP service level agreements. Int. J. Eng. Sci. Comput. 7(10), 15320–15322 (2017)Google Scholar
  12. 12.
    Rahman, Z., et al.: Performance evaluation of first HOP redundancy protocols (HSRP, VRRP & GLBP). J. Appl. Environ. Biol. Sci. 7(3), 268–278 (2017)Google Scholar
  13. 13.
    Hot Standby Router Protocol (HSRP): Frequently Asked Questions. https://www.cisco.com/c/en/us/support/docs/ip/hot-standby-router-protocol-hsrp/9281-3.html. Accessed 19 Apr 2018
  14. 14.
  15. 15.
  16. 16.
    Froom, R., Sivasubramanian, B., Frahim, E.: Implementing Cisco Switched Networks. Indianapolis, Cisco (2010)Google Scholar
  17. 17.

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Solent UniversitySouthamptonUK
  2. 2.Vostron LtdSouthamptonUK

Personalised recommendations