Advertisement

REWAS 2019 pp 137-142 | Cite as

Influence of Metallic Impurities on Solvent Extraction of Cobalt and Nickel from a Laterite Waste Liquor

  • Paula AliprandiniEmail author
  • Mónica M. Jiménez Correa
  • Jorge A. Soares Tenório
  • Denise Crocce Romano Espinosa
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

Limonite is the surface zone of lateritic ore and it was considered an ore waste. However, because of the demand, limonite is now considered an important resource of nickel and cobalt. The presence of impurities in the ore such as magnesium, manganese, and chromium makes it difficult for the recovery of nickel and cobalt. The separation of nickel and cobalt can be done by solvent extraction technique using Cyanex 272 as the extractant. In order to study the extraction of cobalt and nickel from a solution containing chromium, magnesium, and manganese, the pH range between 3.5 and 5.5 was investigated. However, precipitation of chromium, magnesium, manganese, and nickel was observed at pH 5.5. By increasing the pH value, the extraction of cobalt, magnesium, manganese, and chromium was increased. Nickel was not extracted during the study. It was not possible to obtain a solution containing only nickel or cobalt without the presence of the other metals in solution.

Keywords

Limonite ore Cyanex 272 Purification Impurities 

Notes

Acknowledgements

Financial support for this study was supplied from the Coordination for the Improvement of Higher Education Personnel (CAPES), the Counsel of Technological and Scientific Development (CNPq), and the São Paulo Research Foundation (FAPESP—grant 2012/51871-9). The authors thank Ana Carolina Fadel Dalsin for her help on the project.

References

  1. 1.
    Kesler SE, Simon AC (2015) Mineral resources, economics and the environment. 2nd edn. Cambridge University PressGoogle Scholar
  2. 2.
    Gupta CK (2003) Chemical metallurgy principles and practice. Wiley-VCH Verlag GmbH & Co., KgaACrossRefGoogle Scholar
  3. 3.
    Neudorf D (2006) Method for nickel and cobalt recovery from laterite ores by reaction with concentrated acid and water leaching. US2006/0002835Google Scholar
  4. 4.
    Guo X, Li D, Park KH, Tian Q, Wu Z (2009) Leaching behavior of metals from a limonitic nickel laterite using a sulfation-roasting-leaching process. Hydrometallurgy 99:144–150CrossRefGoogle Scholar
  5. 5.
    Mudd GM (2010) Global trends and environmental issues in nickel mining: sulfides versus laterites. Ore Geol Rev 38(1–2):9–26CrossRefGoogle Scholar
  6. 6.
    Chang Y, Zhai X, Li B, Fu Y (2010) Removal of iron from acidic leach liquor of lateritic nickel ore by goethite precipitate. Hydrometallurgy 101(1–2):84–87CrossRefGoogle Scholar
  7. 7.
    Kyle J (2010) Nickel laterite processing technologies—where to next? In: ALTA 2010 nickel/cobalt/copper conference, pp 1–36Google Scholar
  8. 8.
    McDonald RG, Whittington BI (2008) Atmospheric acid leaching of nickel laterites review. Part I Surphuric Acid Technol Hydrometal 91(1–4):35–55Google Scholar
  9. 9.
    Free M (2013) Hydrometallurgy: fundamentals and applications. WileyGoogle Scholar
  10. 10.
    Kislik VS (2012) Solvent extraction: classical and novel approaches. ElsevierGoogle Scholar
  11. 11.
    CYTEC (2008) CYANEX 272 extractant. Construction materials: 16. https://www.cytec.com/sites/default/files/datasheets/CYANEX%20272%20Brochure.pdf. Accessed 21 Feb 2016
  12. 12.
    Aliprandini P (2017) O uso da extração por solventes para tratamento de licor de lixiviação de minério limonítico de níquel (master’s thesis). University of São Paulo, São Paulo, BrazilGoogle Scholar
  13. 13.
    Agatzini-Leonardou S, Tsakiridis PE, Oustadakis P, Karidakis T, Katsiapi A (2009) Hydrometallurgical process for the separation and recovery of nickel from sulphate heap leach liquor of nickeliferrous laterite ores. Miner Eng 22(14):1181–1192CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  • Paula Aliprandini
    • 1
    Email author
  • Mónica M. Jiménez Correa
    • 1
  • Jorge A. Soares Tenório
    • 1
  • Denise Crocce Romano Espinosa
    • 1
  1. 1.Department of Chemical EngineeringPolytechnic School of the University of São PauloSão PauloBrazil

Personalised recommendations