Advertisement

Operation Area Measurement Based on Trajectories of Agricultural Machinery

  • Chang Ren
  • Yanwei Yuan
  • Liwei YangEmail author
  • Junning Zhang
  • Yangchun Liu
  • Chengxu Lv
  • Bo Zhao
Conference paper
Part of the IFIP Advances in Information and Communication Technology book series (IFIPAICT, volume 545)

Abstract

The operation area of agricultural machinery is the basis of not only agricultural machinery service market but also the implementation of agricultural subsidies. This paper studied the operation area measurement of agricultural machinery from two aspects, which were trajectory data screening and area algorithm improvement. According to the actual situation of agricultural machinery, the trajectory points are selected to generate accurate trajectories of agricultural machinery. Then the improved buffer algorithm based on curve topology is applied to the calculation of the area based on the trajectory of agricultural machinery. Test results show the measurement error is less than 1.3%, which can meet the measurement accuracy of operation area of agricultural machinery.

Keywords

Trajectory Operation area measurement Trajectory data screening Buffer algorithm 

Notes

Acknowledgements

The study was supported by the national key research and development program of China (2017YFD0700601) and S&T Nova Program of Beijing (Z1511000003150116)

References

  1. 1.
    Lowenberg-DeBoer, J.: The precision agriculture revolution making the modern farmer. Foreign Aff. 94, 105–112 (2015)Google Scholar
  2. 2.
    Shibusawa, S.: A Systems Approach to Community-Based Precision Agriculture, pp. 213–229. CRC Press, Boca Raton (2016)Google Scholar
  3. 3.
    Zhu, Y.: Approaches and strategies of developing China’s precision agriculture. Agric. Netw. Inf. 9, 10–13 (2015). (in Chinese with English abstract)Google Scholar
  4. 4.
    Xuanming, H.: Discussion on the development of agricultural machinery professional cooperatives. Agric. Technol. Equip. 12, 24–26 (2016). (in Chinese with English abstract)Google Scholar
  5. 5.
    Hsu, Y.-Y., Chiou, K.-C.: An on-board field area meter for agricultural machinery. J. Mar. Sci. Technol. 18(4), 514–519 (2010)Google Scholar
  6. 6.
    Nikola, T.M., Kehinde, O.: Mile, P: Are agricultural subsidies efficient tool for agricultural sector of the republic of Macedonia? Bul. J. Agric. Sci. 23, 363–369 (2017)Google Scholar
  7. 7.
    Zhuang, D.Y., Huang, X.J.: Empirical research on the influences from seed subsidies and labor mobility on food yield in China. Adv. J. Food Sci. Technol. 9(5), 346–350 (2015)CrossRefGoogle Scholar
  8. 8.
    Wakabayashi, K., Imou, K., Li, M., Inoue, H., Ibuki, T.: Positional measurement of an agricultural vehicle at different speeds using omnidirectional vision. Appl. Eng. Agric. 29(2), 289–294 (2013)CrossRefGoogle Scholar
  9. 9.
    Song, J.-H., Jee, G.-I.: Performance enhancement of land vehicle positioning using multiple GPS receivers in an urban area. Sensors 16(10), 1688 (2016)CrossRefGoogle Scholar
  10. 10.
    Xiang, M., Wei, S., Zhang, M., Li, M.Z.: Real-time monitoring system of agricultural machinery operation information based on ARM11 and GNSS. IFAC-PapersOnLine 49(16), 121–126 (2016)CrossRefGoogle Scholar
  11. 11.
    Min, J.: A portable instrument for measuring field area based on GPS module and SPCE061A micro-controller. J. Agric. Mech. Res. 34(11), 64–68 (2012). (in Chinese with English abstract)Google Scholar
  12. 12.
    Zhang, L.: Development of operating field area measurement system based on ARM7 and GPS. Trans. Chin. Soc. Agric. Eng. 25(s2), 83–86 (2009). (in Chinese with English abstract)Google Scholar
  13. 13.
    Peifeng, S.: Structural analysis of the remote performance monitoring system used in modern agricultural machinery. In: International Conference on Intelligent Computation Technology and Automation, vol. 2, pp. 189–193 (2011)Google Scholar
  14. 14.
    Wang, C.C.: Research of area measurement algorithm based on GPS. J. Shandong Univ. Technol. (Nat. Sci. Ed.) 27(4), 64–68 (2013). (in Chinese with English abstract)Google Scholar
  15. 15.
    Petukhov, D.A., Nazarov, A.N., Voronkov, I.V.: Measurements of Field Areas using Modern Specialized Instrumentation and Software. Tekhnika i oborudovanie dlya sela 4, 14–17 (2016). in RussianGoogle Scholar
  16. 16.
    Mistary, P.V., Chile, R.H.: Real time vehicle tracking system based on ARM7 GPS and GSM technology. In: India Conference, pp. 1–6 (2015)Google Scholar
  17. 17.
    Dong, J.: Multifunctional field area measurement and experimental research based on GPS module. In: World Automation Congress (2010)Google Scholar
  18. 18.
    Wei, Z., Yang, F., Zhang, L.: The research of dynamic agricultural machinery working area measure system. In: International Conference on Remote Sensing (2011)Google Scholar
  19. 19.
    Ji, B.B.: A real-time measurement based on GPS which was designed for calculating the harvest area of combine. Chin. Agric. Mech. 6, 89–92 (2012). (in Chinese with English abstract)Google Scholar
  20. 20.
    Bingling, S.: Research and development of agricultural machinery operating area measuring system based on single chip computer. Adv. Mater. Res. 912, 994–997 (2014)Google Scholar
  21. 21.
    Liu, Y.: Design and implementation of remote management system for subsoiler. Trans. Chin. Soc. Agric. 47(s1), 43–48 (2016). (in Chinese with English abstract)Google Scholar
  22. 22.
    Fujimoto, A., Satow, T., Kishimoto, T.: Development of a mobile field computer to record tractor operations for cloud computing analysis. Agric. Inf. Res. 24(2), 15–22 (2015)Google Scholar
  23. 23.
    Lu, Z.: Measurement of field area based on tractor operation trajectory. Trans. Chin. Soc. Agric. Eng. 31(19), 169–174 (2015). (in Chinese with English abstract)Google Scholar
  24. 24.
    Wang, M.: The design of agricultural machinery autonomous navigation system based on Linux-ARM. In: Advanced Information Management, Communicates, Electronic and Automation Control Conference, pp. 1279–1282 (2016)Google Scholar
  25. 25.
    Yu, H.: Study on the operation area measurement algorithm based on the trajectory of agricultural machinery. Shandong Agricultural University (2014). (in Chinese with English abstract)Google Scholar
  26. 26.
    Liu, H.: Buffer algorithms for operation area measurement based on global navigation satellite system trajectories of agricultural machinery. Trans. Chin. Soc. Agric. Eng. 31(7), 180–184 (2015). (in Chinese with English abstract)Google Scholar
  27. 27.
    Xu, Y., Zhang, J., Tan, N.: Improved algorithm for line buffering based on plane sweep technique. Appl. Res. Comput. 29(11), 4363–4364 (2011)Google Scholar
  28. 28.
    Zalik, B., Zadravec, M., Clapworthy, G.J.: Construction of a non-symmetric geometric buffer from a set of line segments. Comput. Geosci. 29(1), 53–63 (2003)CrossRefGoogle Scholar
  29. 29.
    Liu, X.F.: Research on extracting polygon skeleton by using inner buffering algorithm. Hydrogr. Surv. Charting 30(5), 46–48 (2010). (in Chinese with English abstract)Google Scholar
  30. 30.
    Peng, R.C., Dong, J., Zheng, Y.D.: Buffer construction algorithm of line feature based on the subsection solution model. Hydrogr. Surv. Charting 32(6), 20–23 (2012). (in Chinese with English abstract)Google Scholar
  31. 31.
    Chen, Y.T., Yan, T.L., Zhu, D.H.: An algorithm for identifying convex-concave vertices of polygon based on Simpson formula. Geogr. Geo-Inf. Sci. 26(6), 28–30 (2010). (in Chinese with English abstract)Google Scholar

Copyright information

© IFIP International Federation for Information Processing 2019

Authors and Affiliations

  • Chang Ren
    • 1
    • 2
  • Yanwei Yuan
    • 2
  • Liwei Yang
    • 1
    Email author
  • Junning Zhang
    • 2
  • Yangchun Liu
    • 2
  • Chengxu Lv
    • 2
  • Bo Zhao
    • 2
  1. 1.China Agriculture UniversityBeijingChina
  2. 2.Chinese Academy of Agricultural Mechanization SciencesBeijingChina

Personalised recommendations