Advertisement

Parameters of the Metallic Calcium Reduction from Magnesium Production Residues

  • K. C. TasyurekEmail author
  • M. Bugdayci
  • O. Yucel
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

In this paper, we presented an investigation of the theoretical and the industrial definitions of the metallic calcium production by metallothermic process in the vacuum atmosphere. In the studies, Al is the only reductant that is used for the metallothermic calcium production. In experiments, effects of percentage of Al stoichiometry as a reductant, time variances of reduction and temperature of reduction were investigated. In this study, experiments were carried out at 1200, 1250, 1300 °C and 100% Al, 125% Al and 150% Al stoichiometry to produce metallic calcium from the residue of metallic magnesium production residue. All raw materials and residue phases were characterized by using atomic absorption spectrometry (AAS), X-Ray Diffraction Spectrometry (XRD) and chemical analysis techniques. From the results of these experiments, it was understood that the use of Al with the increasing stoichiometry increases the efficiency of the metallic calcium production with the increase of reduction time.

References

  1. 1.
    Cardarelli F (2008) Materials handbook: a concise desktop reference, 2nd edn. Springer, London, pp 620–622Google Scholar
  2. 2.
    Mantell CL (1973) The alkaline earth metals: calcium, barium, and strontium. In: Hampel CA (ed) Rare metals handbook, 2nd edn. Reinhold, New York, pp 15–25Google Scholar
  3. 3.
    Jia X, Cheng-Fu G, Yong-Gang J, Yong-He W, Cent J (2010) South Univ Technol 17:918–923CrossRefGoogle Scholar
  4. 4.
    Emsley J (2011) Nature’s building blocks, an A-Z guide to the elements. Oxford University Press, OxfordGoogle Scholar
  5. 5.
    Gray Theodore (2009) The elements, a visual exploration of every known atom in the universe. Black Dog & Leventhal Publishers Inc, New YorkGoogle Scholar
  6. 6.
    Stwertka A (2012) A guide to the elements, 3rd edn. Oxford University Press, OxfordGoogle Scholar
  7. 7.
    Pidgeon LM, MacCatty SA (1949) Production of calcium, USA Patent Office, 15 Mar 1949Google Scholar
  8. 8.
    Beruto D, Searcy AW, Kim MG (2004) Thermochim Acta 424:99–109CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  1. 1.Metallurgical and Materials Engineering Department, Faculty of Chemical and Metallurgical EngineeringIstanbul Technical UniversityMaslak, IstanbulTurkey
  2. 2.Chemical and Process Engineering Department, Faculty of EngineeringYalova UniversityYalovaTurkey

Personalised recommendations