Advertisement

Effect of Al on the Formation of IAF in Al–Ti–Mg Deoxidized and RE-Treated Steel

  • Xiaokang Cui
  • Bo SongEmail author
  • Zhen Liu
  • Longfei Li
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

To clarify the effect of aluminium on the formation of intragranular acicular ferrite (IAF) in Al–Ti–Mg deoxidized and rare earth-treated steels with different S content, the thermodynamic calculation and scanning electron microscope (SEM) with energy dispersive spectrometer (EDS) were used to study the distribution and composition of inclusions. The results showed that the addition of Al led to the increase of mean size of effective inclusions. With the content of Al increasing from 0.0027 to 0.0086 wt%, the main inclusions in the low S steels changed from La2O3 to LaAlO3 and the proportion of IAF decreased rapidly. However, the inclusions in the high S samples were mainly composed of La2O2S or LaAlO3 and MgO with MnS precipitating on the surface of them. As the Al content increased from 0.0030 to 0.0097 wt%, the main composition of core evolved from La2O2S to LaAlO3, but the proportion of IAF slightly changed. As the Al content approached 0.03 wt%, the proportion of IAF decreased rapidly and a plenty of upper bainite or widmanstatten were discovered.

Keywords

Intragranular acicular ferrite Aluminum Inclusions 

Notes

Acknowledgements

This work is financially supported by National Nature Science Foundation of China under grant No. 51774024

References

  1. 1.
    Shin SY, Oh K, Kang KB (2010) Improvement of Charpy impact properties in heat affected zones of API X80 pipeline steels containing complex oxides. Mater Sci Technol 26(9):1049–1058CrossRefGoogle Scholar
  2. 2.
    He K, Edmonds DV (2002) Formation of acicular ferrite and influence of vanadium alloying. Mater Sci Technol 18(3):289–296CrossRefGoogle Scholar
  3. 3.
    Shim JH, Cho YW, Shim JD (2001) Effects of Si and Al on acicular ferrite formation in C–Mn steel. Metall Mater Trans A 32(1):75–83CrossRefGoogle Scholar
  4. 4.
    Wu Z, Zheng W, Li G (2015) Effect of inclusions’ behavior on the microstructure in Al–Ti deoxidized and magnesium-treated steel with different aluminum contents. Metall Mater Trans B 46(3):1226–1241CrossRefGoogle Scholar
  5. 5.
    Ma W, Bao Y, Wang M (2014) Effect of Mg and Ca treatment on behavior and particle size of inclusions in bearing steels. ISIJ Int 54(3):536–542CrossRefGoogle Scholar
  6. 6.
    Song M, Song B, Yang Z (2017) Effects of Mn and Al on the intragranular acicular ferrite formation in rare earth treated C–Mn steel. High Temp Mater Process Lond 36(7):683–691Google Scholar
  7. 7.
    Zheng W, Wu Z, Li G (2014) Effect of Al content on the characteristics of inclusions in Al–Ti complex deoxidized steel with calcium treatment. ISIJ Int 54(8):1755–1764CrossRefGoogle Scholar
  8. 8.
    Zhang Z, Farrar RA (1996) Role of non-metallic inclusions in formation of acicular ferrite in low alloy weld metals. Mater Sci Technol 12(3):237–260CrossRefGoogle Scholar
  9. 9.
    Bramfitt BL (1970) The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron. Metall Trans 1(7):1987–1995CrossRefGoogle Scholar
  10. 10.
    Shigesato G, Sugiyama M (2002) Development of in situ observation technique using scanning ion microscopy and demonstration of Mn-depletion effect on intragranular ferrite transformation in low-alloy steel. J Electron Microsc 51(6):359–367CrossRefGoogle Scholar
  11. 11.
    Kang Y, Han K, Park JH (2014) Mn-depleted zone formation in rapidly cooled high-strength low-alloy steel welds. Metall Mater Trans A 45(11):4753–4757CrossRefGoogle Scholar
  12. 12.
    Byun JS, Shim JH, Cho YW (2003) Non-metallic inclusion and intragranular nucleation of ferrite in Ti-killed C–Mn steel. Acta Mater 51(6):1593–1606CrossRefGoogle Scholar
  13. 13.
    Yamamoto K, Hasegawa T, Takamura J (1996) Effect of boron on intra-granular ferrite formation in Ti-oxide bearing steels. ISIJ Int 36(1):80–86CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  1. 1.School of Metallurgical and Ecological EngineerUniversity of Science and Technology BeijingBeijingChina

Personalised recommendations