Advertisement

Effects of Electrolytic Parameters on the Preparation of Al–Sc Master Alloy in Na3AlF6-K3AlF6-AlF3 Melt

  • Kai Yang
  • Zhongliang TianEmail author
  • Xun Hu
  • Yanqing Lai
  • Jie Li
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

The effects of electrolytic parameters on the content of Sc in Al–Sc master alloy prepared by electrolysis in Na3AlF6-K3AlF6-AlF3 melt were studied. It is observed that the content of Sc in Al–Sc master alloy increases and then decreases with increasing the electrolysis temperature and the cathodic current density. Under the electrolysis condition (temperature 950 °C, cathodic current density 1.50 A cm−2 and concentration of Al2O3 1.0 wt%), the content of Sc in the production is increased from 0.81 to 3.87 wt% as the value of the concentration ratio of Sc2O3 to Al2O3 ([Sc2O3]/[Al2O3]) increased from 2 to 6. The analysis of SEM indicates that the production of Al–Sc master alloy is composed of the aluminum and the Al3Sc. The distribution of Sc in Al–Sc master alloy is uniform.

Keywords

Al–Sc master alloy Electrolytic parameters Na3AlF6-K3AlF6-AlF3 melt Electrolysis 

Notes

Acknowledgements

The authors gratefully acknowledge the financial support from the State Natural Science Fund (No. 51674301).

References

  1. 1.
    Rã¸Yset J, Ryum N (2005) Scandium in aluminium alloys. Metall Rev 50(1):19–44Google Scholar
  2. 2.
    Davydov VG, Rostova TD, Zakharov VV et al (2000) Scientific principles of making an alloying addition of scandium to aluminium alloys. Mater Sci Eng A 280(1):30–36CrossRefGoogle Scholar
  3. 3.
    Asta M, Ozoliņš V (2001) Structural, vibrational, and thermodynamic properties of Al-Sc alloys and intermetallic compounds. Phys Rev B 64(9):094104CrossRefGoogle Scholar
  4. 4.
    Venkateswarlu K, Pathak LC, Ray AK et al (2004) Microstructure, tensile strength and wear behaviour of Al–Sc alloy. Mater Sci Eng A 383(2):374–380CrossRefGoogle Scholar
  5. 5.
    Teng GC, Chai YC, Yang Y et al (2010) Preparation of Al-Sc master alloy. World Nonferrous Met 1:70–71 (in Chinese)Google Scholar
  6. 6.
    Liu QC, Xue JL, Zhu J et al (2012) Processing Al-Sc alloys at liquid aluminum cathode in KF-AlF3 molten salt. ECS Trans 50(11):483–489CrossRefGoogle Scholar
  7. 7.
    Guan CY, Xue JL, Zhu J, et al (2012) Preparing Aluminum-Scandium alloys using direct hall reduction process. In: 3rd international symposium on high-temperature metallurgical processing. Springer, Cham, pp 243–250CrossRefGoogle Scholar
  8. 8.
    Harata M, Yasuda K, Yakushiji H et al (2009) Electrochemical production of Al-Sc alloy in CaCl2-Sc2O3 molten salt. J Alloy Compd 474(1–2):124–130CrossRefGoogle Scholar
  9. 9.
    Cheng T, Lv ZJ, Zhai XJ, Zhang MJ, Tu GF (2010) Preparation of Al-Sc alloys investigated in the systems of CaCl2-LiF. J Mater Metall 9(1):39–42 (in Chinese)Google Scholar
  10. 10.
    Sun BL, Zhai YC, Tian YW (1998) Preparation of Al-Sc alloy in fluoride molten salts with molten salt electrolysis. Chin J Rare Met 22(3):191–193 (in Chinese)Google Scholar
  11. 11.
    Liu QC, Xue JL, Zhu J, et al (2012) Preparing aluminum-scandium inter-alloy during reduction process in KF-AlF3-Sc2O3 melts. Light Met 685–688Google Scholar
  12. 12.
    Yang S (2003) The research on direct electrolytic Al-Sc alloys in molten salt. Zhengzhou University (in Chinese)Google Scholar
  13. 13.
    Lu GM, Liu XS (1999) Dissolution of Sc2O3 in fluoride molten salt. Chin J Nonferrous Met 9(3):624–626 (in Chinese)Google Scholar
  14. 14.
    Yang S, Li Q, Gu QS (2003) Solubility of Sc2O3 in n NaF∙AlF3-Al2O3 melts. Chin J Rare Met (4):418–420 (in Chinese)Google Scholar
  15. 15.
    Tian Z, Hu X, Lai Y, et al (2015) Solubility of Sc2O3 in Na3AlF6-K3AlF6-AlF3 melts. In: 6th international symposium on high-temperature metallurgical processing. Springer, Cham, pp 105–112Google Scholar
  16. 16.
    Tian Z, Lai Y, Zhang K, et al (2016) Preliminary study on preparation of Al-Sc master alloy in Na3AlF6-K3AlF6-AlF3 melt. In: 7th international symposium on high-temperature metallurgical processing. Springer, Cham, pp 157–163Google Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  • Kai Yang
    • 1
  • Zhongliang Tian
    • 1
    Email author
  • Xun Hu
    • 1
  • Yanqing Lai
    • 1
  • Jie Li
    • 1
  1. 1.School of Metallurgy and EnvironmentCentral South UniversityChangshaChina

Personalised recommendations