Advertisement

A New Method for Determining High-Temperature Wettability of Bonding Phase

  • Yijia Dong
  • Guanghui LiEmail author
  • Chen Liu
  • Qiang Zhong
  • Hu Sun
  • Jun Luo
  • Tao Jiang
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

High-temperature wettability of bonding phase can be elucidated by its contact angle which is an important property reflecting the bonding behaviour between bonding phases and unmelted components. A new method for determining the high-temperature wettability of bonding phase was developed and applied to analyse the liquid phase generation capability, liquid quantity and bonding strength. Results showed that two cryogenic liquid generated areas of andradite and calcium ferrite formation appeared in Fe2O3–CaO–SiO2 ternary system phase by thermodynamic analysis and the initial temperature of liquid phase formation was divided into three parts. The contact angle will decrease gradually with the increase of furnace temperature until a constant value was reached which measured by a professional software (PolyPro). A positive correlation has been found between contact angle and liquid phase generation ability. This method is meaningful for studying the high-temperature wettability of bonding phase.

Keywords

High-temperature wettability Iron ore Phase diagram 

References

  1. 1.
    Li HG, Zhang JL, Pei YD (2011) Melting characteristics of iron ore fine during sintering process. J Iron Steel Res Int 18(5):11–15CrossRefGoogle Scholar
  2. 2.
    Jiang T (ed) (2016) Principle and technology of agglomeration of iron ores. Central south University Press, ChangshaGoogle Scholar
  3. 3.
    Li GS (2008) The mechanism and reasonable composition of bond relative sinter strength. Ph.D. thesis, Northeastern UniversityGoogle Scholar
  4. 4.
    Li GS, Dou LW, Shang C (2009) Study on self-strength of calcium ferrite binding phase in Sinter. J Northeastern Univ (Nat Sci) 30(2):225–228Google Scholar
  5. 5.
    Zhang GL, Wu SL, Su B (2015) Influencing factor of sinter body strength and its effects on iron ore sintering indexes. Int J Miner Metall Mater 22(6):553–561CrossRefGoogle Scholar
  6. 6.
    Yu B, Lv X, Xiang S, Bai C, Yin J (2015) Wetting behavior of Al2O3 substrate by calcium ferrite series melts. Trans Iron Steel Inst Japan 55(3):483–490CrossRefGoogle Scholar
  7. 7.
    Nakashima K, Saito N, Shinozaki N (2007) Wetting and penetration behavior of calcium ferrite melts to sintered hematite. ISIJ Int 44:2052–2056CrossRefGoogle Scholar
  8. 8.
    Yu B, Lv XW, Xiang SL, Xu J (2015) Dissolution kinetics of Al2O3, SiO2 into calcium ferrite based slag. In: Proceedings of the 10th CSM Steel Congress & the 6th Baosteel Biennial Academic Conference, Shang Hai, 1–9 Oct 2015Google Scholar
  9. 9.
    Zhu CE, Wu K, Huang DJ (2017) Research on characteristic number about bonding strength of binding phase in sinter. Energy Metall Ind 36(3):23–26Google Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  • Yijia Dong
    • 1
  • Guanghui Li
    • 1
    Email author
  • Chen Liu
    • 1
  • Qiang Zhong
    • 1
  • Hu Sun
    • 1
  • Jun Luo
    • 1
  • Tao Jiang
    • 1
  1. 1.School of Minerals Processing & BioengineeringCentral South UniversityChangshaChina

Personalised recommendations